Canon Color Bubblejet (BJC) i850

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If the nozzle check pattern shows adequate ink, but the printer doesn`t print color, clean the printhead. After that, print a nozzle check pattern. After performing printhead cleaning, perform a printhead deep cleaning. If still, the problem persists, switch off your printer and do the deep cleaning after a day.
If there is plenty of ink and the printer does not print, clean the Print Head then print the nozzle check pattern to ensure ink is ejected properly. If the problem is not resolved after performing Print Head Cleaning twice, carry out the Print Head Deep Cleaning.
Check the nozzle check pattern you printed. (1) If lines of this pattern are missing, the print head nozzles need cleaning. (2) If these patterns have white streaks, the print head nozzles need cleaning.
Clean the printheads: Sometimes the issue why you are unable to print in color is because our printheads are clogged with ink. Clean the printheads and then print a document to check if color printing works. Some printers also have in-built programs that can clean themselves so remember to check for that.
One or more clogged nozzles preventing ink from getting to the page is the most common cause of a printer skipping lines. Through normal use, small amounts of ink can collect and dry in the printhead blocking the nozzles.
A common culprit when it comes to a printer skipping lines is that the print head has become misaligned. Fortunately, most modern printers offer an easy-to-access alignment tool to check on a print head`s alignment and fix it if necessary. Perform a deep dive into the printer`s settings and run the alignment tool.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
Select Start > Settings . Go to Devices > Printers & scanners > select a printer > Manage.
At the Windows Manage your device screen, click Printer properties. Click Preferences. From the Color Mode dropdown, choose either Color or Black and White. Click OK to save.
When designing for a printed format, the best color profile to use is CMYK, which uses the base colors of Cyan, Magenta, Yellow, and Key (or Black). These colors are usually expressed as percentages of each base color, for example a deep plum color would be expressed like this: C=74 M=89 Y=27 K=13.
Print color is affected by more than the RGB to CMYK conversion. Paper plays a big factor in color reproduction. A bright white stock will create a more vibrant color compared to a dull white stock. Uncoated paper is more porous than coated paper stock, so the ink tends to seep in causing a softer image.
You`ll know fairly quickly if your printhead is causing you problems. If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead.
A. It`s not necessary to clean the nozzle after every print, but it`s a good idea to do so on a regular basis. This will help prevent clogs and other issues that can affect the performance of your 3D printer.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
With the printer powered on, select Setup . Select Device settings . Scroll to the bottom of the menu list and select Reset settings.
With proper operating conditions and usage, the printhead will last more than 1 to 2 years.
You can buy a specialty printhead cleaner kit with a cleaning solution, but it`s not really necessary. For water based inks, a soap and water solution will suffice (half a cup of distilled water with a drop of dishwashing liquid and an ounce of isopropyl alcohol).
Why is my printer printing yellow not red? It is most likely that your image is yellow where you were expecting it to be red and you may also notice that blue parts of the image appear turquoise instead. Both of these effects are caused by a lack of magenta ink/toner on your prints.
Why is my printer printing yellow not red? It is most likely that your image is yellow where you were expecting it to be red and you may also notice that blue parts of the image appear turquoise instead. Both of these effects are caused by a lack of magenta ink/toner on your prints.
The first step in printer calibration is to calibrate your monitor. Then, make sure you use the correct printer driver for your printer. Within the printer driver are controls for fine-tuning the overall appearance of color from your printer. Depending on your needs, this may be sufficient to get the color you want.
Why is my printer printing yellow not red? It is most likely that your image is yellow where you were expecting it to be red and you may also notice that blue parts of the image appear turquoise instead. Both of these effects are caused by a lack of magenta ink/toner on your prints.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Print problem with Canon MP620
ANSWER : Open the front of the printer.

hp deskjet 960c printing problem
ANSWER : RE: HP 960c printer. I have new cartridges and the test page prints out full color. When printing a color document the page prints in black & white. Why not color? The print page is on color not black & white.

when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?

Printing Problems
ANSWER : http://www.fixyourownprinter.com/posts/34513

problems with printing
ANSWER : Check your settings to make sure they are Left to Right print order. If they are then reinstall printer driver. If that doesn’t correct problem uninstall printer, reboot computer, and reinstall printer.

EPSON Stylus NX400 Vista Print Problem
ANSWER : I have the similar issue. The browse button would not open the connection listing the shared printer. How can I fix it? Please respond to this post or contact me via buy essays. Thank you in advance!

Printing problem
ANSWER : Either the cartridge carousel jumped out of alignment or the carousel brake solenoid is sticking. Both issues have been covered on the forum before. Do a search.

epson L800 – print head carriage problem
ANSWER : epson l800printer head complaint start the printer first 4or 5 prints coming full megenta daily same problem what is the problem