I lost my cleaning solution instructions

To clean the print head manually, press the Menu button and hold it for 3 seconds. Note: You can also run nozzle checks and head cleaning cycles from your computer using the Epson Printer Utility 2 (Macintosh) or the Utility tab in your printer driver (Windows).

Make sure that the printer is turned on and the ink out light is off. Access the Print or Page Setup dialog box and click the Utility icon button, then click the Head Cleaning button. Follow the on-screen instructions. The power light and the ink lights flash while the printer performs the cleaning cycle.

Make sure that the printer is turned on and the ink out light is off. Access the Print or Page Setup dialog box and click the Utility icon button, then click the Head Cleaning button. Follow the on-screen instructions. The power light and the ink lights flash while the printer performs the cleaning cycle.

A standard Print Head Cleaning cycle is done by clicking `Cleaning` on the Maintenance tab, then waiting a little bit until a message comes up; confirm it and click `Print Check Pattern. ` From this you can then tell what sort of Deep Clean you need to do by which lines (black or colour) are faded.

The sponge end of a blocked printer head can be cleaned with only one liquid other than water. This liquid is isopropyl alcohol. Isopropyl alcohol isn`t strong enough to melt the sponge but is still strong enough to dissolve the ink inside the blocked printer head.

Gocolor Head Cleaning Solution Liquid 200 ml for Epson Printer White Ink Cartridge – Gocolor : Flipkart.com.

The printer driver`s online help provides details on printer driver settings. Open the Print dialog box. Select Printer Settings from the drop-down list, and select the Basic settings tab.

Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings. Note: This reset does not affect LCD contrast, Print Confirmation, or PictureMate Print Wizard settings.

Install the bottle cap tightly; otherwise, ink may leak. Refill the ink tank with the correct color ink up to the upper line on the ink tank. If any ink remains in the ink bottle after filling the ink tank, place the bottle cap tip securely on the bottle cap and store the ink bottle upright for later use.

Once a cartridge has been used until it is empty the chip records that the cartridge has no remaining ink or toner and so when it`s refilled, the chip needs to be reset. If this isn`t done, then the printer will fail to recognise the cartridge.

During the printing process, paper, toner and dust particles can accumulate inside the printer. Over time, this buildup can cause print-quality problems such as toner specks or smearing. This printer has a cleaning mode that can correct and prevent these types of problems.

(1) Load a sheet of A4 or Letter-sized plain paper in the Rear Tray and set the Paper Thickness Lever to the right. (2) Print the nozzle check pattern to check the print head condition. (3) If the print head nozzles are still not clean, turn off the printer and perform another Print Head Deep Cleaning after 24 hours.

Make sure that the printer is turned on and the ink out light is off. Access the Print or Page Setup dialog box and click the Utility icon button, then click the Head Cleaning button. Follow the on-screen instructions. The power light and the ink lights flash while the printer performs the cleaning cycle.

Make sure that the printer is turned on and the ink out light is off. Access the Print or Page Setup dialog box and click the Utility icon button, then click the Head Cleaning button. Follow the on-screen instructions. The power light and the ink lights flash while the printer performs the cleaning cycle.