Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.
Typically a 59. xx error message is due to a temporary printing error occurred and requires you to cycle power on the printer. The 59 error is associated with a main motor failure.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
The 41.2 error in the LaserJet 5Si, 8000, 8100 and 8150 is typically caused by high voltage arcing that disrupts the beam detect circuit. The most common cause of arcing is a bad connection to the transfer roller. Other possibilities are discussed at the end of the article.
The 60.02 error indicates a possible fault with the paper tray lifter motor (RM1-1750).
This error is specifically related to the fuser drive motor itself. The manual states that it`s a “fuser motor start up error“.
Your printer display or status monitor may read “Fatal Error”. This simply means a problem has occurred requiring action to clear.
Fatal Error

The yellow tape seal has not been removed from the ink cartridge. Turn off the printer, then turn it on again. The ink out lights come on and the print head moves left. Replace the ink cartridge with a new one.

Summary: Error Code 0x80070005 — also known as `Access Denied` error — is a type of Windows update error. It occurs when the system or user lacks the required files or permissions to change settings at the time of Windows update.
A new page should print with a claim code. If the page does not print, see the email address on the printer display. The first part of the HP ePrint address preceding “@hpeprint.com” is the claim code. For example, if your HP ePrint email is “abc@hpeprint.com”, then “abc” is your claim code.
Remove any jammed paper that is accessible from the input tray area. Press the Cancel button to try and automatically clear the paper jam. If the paper jam error persists, continue these steps to manually clear the jam. Gently remove any jammed paper and bits of torn paper from the input tray.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

hplj 4 stops working after being on for 5 minutes
ANSWER : Those are some strange symptoms. I would kind of suspect the culprit is the DC controller. The accordion jam is another issue. That is caused by the 2 exit rollers. They get glazed from age and aren’t able to push the paper out and it accordions because the fuser is still pushing it out and there’s nowhere for it to go.

Read Full Q/A … :
Unknown Printer

HPLJ 4200 54.1 error
ANSWER : Can you please send me the link

Read Full Q/A … :
Unknown Printer