HP Color LaserJet 3700N

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Press your printer`s Setup button. Go to System Setup. Choose Print Quality and then Calibrate Color. Choose Calibrate Now and press OK.
Right-click the printer that you want to use, and then click Printing preferences. Make your choices, and then click OK. Under option Print color select color , then the OK button. Now the printer is set to print in color.
Clean the printheads: Sometimes the issue why you are unable to print in color is because our printheads are clogged with ink. Clean the printheads and then print a document to check if color printing works. Some printers also have in-built programs that can clean themselves so remember to check for that.
Step 1: go to Display settings

Right click on your mouse and go to `Display settings`. Scroll down and choose `Advanced display settings`. Here, choose `Color calibration` and then select `Next`. Move this screen to the monitor you want to calibrate.

Paper Jams

This is a common laser printer problem. Primary causes include grime, dust, worn rollers, or incorrect paper weight. The most basic way to prevent paper jams is simply through regular cleaning of your printer. Also, replace parts as needed.

First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
Reasons why your HP printer has ink but won`t print

This may seem obvious, but it sometimes happens: first make sure your paper tray has paper in it. Misalignment, clogged printheads, faulty data communication or insufficient ink levels can also be sources of the problem.

Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.
Rotate the body of the laser 180 degrees to shine the opposite side of the laser to the wall and again mark the height as Y2. All four sides of the laser have now been marked. In principle all four marks made should be at exactly the same height, if they are then it is perfectly calibrated.
Most modern good quality LCDs are close to 6500K. Using 6500K is a great starting point, but there are reasons to stray from it in special cases. For example, a slightly lower color temperature around 5500K can provide a better screen to print match for your particular work environment.
Select Start > Settings . Select Personalization > Colors. In the list for Choose your mode, select Custom. In the list for Choose your default Windows mode, select Light or Dark.
Monitor calibration is the process of measuring and adjusting the colors on your computer monitor to match a common standard. To measure the color, you`ll use a device called a spectrophotometer or colorimeter that hangs off your screen. The device works through computer software to maintain the color of your images.
Open Colors settings. Make photos and colors easier to see with a color filter: Select the Start button > Settings > Ease of Access > Color filters. Open Color filters settings.
Professional colorists recommend you calibrate displays at least once a month to ensure your colors stay consistent, especially as your monitor degrades and its colors change over time. Others argue that technology has advanced to the point that color on all devices is essentially good enough.
Risk of injury increases when viewed with optical aids. Immediate skin hazard from direct beam and immediate eye hazard when viewed directly. Immediate skin hazard and eye hazard from exposure to either the direct or reflected beam; may also present a fire hazard. Non-Ionizing Radiation: Standards and Regulations.
Some of the most common printer problems that most of us have experienced include paper jamming, slow printing, uneven printing, and wrong colour output. If you use your printer frequently, we know how annoying it can be to have persisting problems with the printer.
Black, cyan, magenta, or yellow horizontal lines or streaks can be caused by a dirty corona wire, a toner cartridge, or the drum unit.
The streaks or lines might be caused due to low ink levels in one or both ink cartridges. Check the ink levels using the HP Toolbox to determine if the ink cartridges are low on ink and need to be replaced.
Right-click the printer icon on the taskbar, then select Nozzle Check.
The most obvious is most common on laser color printers and can be detected by a flashing message on the printer display screen. Other signs of a bad printer drum include printing blank pages, printing gray pages and strange sounds coming from the printer as it prints.
The answer is, it depends on the type of laser printer you have. But most modern laser printers will not allow you to go ahead to print in this scenario. This is because the other colors are used to give clarity to the black printout to make it more legible.
This error message is usually the result of a cartridge that is not firmly seated in its designated slot. To troubleshoot the problem, begin by completely removing the cartridge from its port. Reinstall the cartridge by positioning it so that it snaps into place and is securely fastened in its slot.
If the nozzle check pattern does not print out properly, check if any of the missing colors are due to those color ink tanks being empty. If there is plenty of ink and the printer does not print, clean the Print Head then print the nozzle check pattern to ensure ink is ejected properly.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Laser Jet 4700
ANSWER : This is the most confusing post ever posted on this forum. No way you can be helped.

Read Full Q/A … :

HP Color LaserJet 3700N

Dell Laser MFP 1600n constant paper jam
ANSWER : I’m having a similar issue, checked you resolution and found the little grey piece seems to be in place and able to rock back and forth. When I send a job to the printer it sounds like it is trying to pick up the paper then I get the ‘Jam 0’ error. Any ideas ?

Read Full Q/A … :

HP Color LaserJet 3700N

problems with printing
ANSWER : Check your settings to make sure they are Left to Right print order. If they are then reinstall printer driver. If that doesn’t correct problem uninstall printer, reboot computer, and reinstall printer.

Read Full Q/A … :

HP Color LaserJet 3700N

Oki C5300 problem : network menu disappeared.
ANSWER : You need MuWin and your NIC firmware to upload to the host, but both things are keep under cover by OKI… Find attached old (and probably useless for you) files; check and say.. (https://mega.nz/#F!oEkA3JKZ)By the way, you should specify what firmware do you need ¿isn’t it? I don’t know yet what firmware uses my c511dn nor what NIC host it mounts… :~(

Read Full Q/A … :

HP Color LaserJet 3700N

HP PSC 2410 clicking noise problem
ANSWER : I have the same issue… I’ve tried everything above… I don’t believe it’s dust as this happens on and off occasionally… I think I may need to make a youtube video of me “fixing” this printer! I’m really frustrated with this thing!! If it doesn’t work soon, I’m gonna by the solution in the form of a hammer!

Read Full Q/A … :

HP Color LaserJet 3700N

Paper Feed Problem on HP R80
ANSWER : In the last examination it is our origination of death which chooses our responses to all the inquiries life puts to us. The most pleasant spot to be is in somebody’s idea; the most secure spot to be is in somebody’s petitions.

Read Full Q/A … :

HP Color LaserJet 3700N

problem in driver
ANSWER : we offer Assignment Help Australia for you do not waste more time to searching others just click us.

Read Full Q/A … :

HP Color LaserJet 3700N

epson printer problems
ANSWER : My Printer Has A Internal Erro

Read Full Q/A … :

HP Color LaserJet 3700N