HP LaserJet 5SI
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
You need to ensure your HP printer has enough paper, ink, or toner, and it is not stuck on paper jam. Also, check the status of your printer cartridge and try replacing it with a new one if it is not good enough. In some cases, your HP printer stops printing after you replace its parts.
The printer is either low in toner, the density is set too low, or the Economode may be turned on. Remove the toner cartridge and shake it. This will redistribute the toner and often will temporarily solve the problem. However, this usually indicates it is time to install a new cartridge.
HP 1100, 1200 – While the printer is on, press and hold the Go button for 5 seconds. This will reset the printer.
Sometimes power cycling your printer can resolve the issue. Turn off your printer and unplug it, wait 30 seconds, plug your printer back in, and then turn the printer back on.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
Most printers will stop working when they`re out of paper, ink or toner, or if the unit detects an issue with the ink or toner cartridge. When this occurs, you might receive an error message or notice blinking green or amber lights on your printer.
If your printer is running low on ink, it may start printing blank pages. To check your ink levels, go to your printer`s control panel and select the Ink Levels option. Whenever the ink levels are low, replace the cartridges with new ones. You can also try shaking the cartridge gently to redistribute the ink.
Turn off the HP printer and unplug it from the power source. Also, shut down your computer and unplug any external devices. Wait for a few minutes and then plug in the printer and turn it back on. Finally, turn on your computer and check if the error state has been resolved.
Answer. On HP printers, a “cold reset” causes the printer to return to its factory default settings, which among other things, causes it to try and retrieve its configuration information from a BOOTP server.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
The Print Spooler is software built into the Windows operating system that temporarily stores print jobs in the computer`s memory until the printer is ready to print them. In some circumstances you may need to stop and/or restart the service.
For the HP 932-933 ink-series printer error message “Ink System Failure” or “Printhead Failure” typically one of the ink cartridges could be low (or empty) on ink. It also possible that a poor seal is present between the cartridge and the internal printhead and the cartridge may need to be replaced with a new one.
Run Diagnose & Fix
Open the HP Smart app, and then open Diagnose & Fix. Windows: Click the Diagnose & Fix icon in the bottom left corner. macOS: Click your printer, click Printers in the top menu bar, and then click Diagnose & Fix.
Make sure the printer is on and connected to your computer. Go to HP Software and Driver Downloads, and then enter your printer model. Select Firmware from the list of drivers, click Download next to the update, and then follow the instructions.
Partial prints are a common issue with printers and there are several main reasons it can occur: Problem with the print spooler (on Windows PCs) Overload of the GPU on later model Macs. Dodgy USB cord.
A printer printing lines on the page are normally caused by a blocked, dirty, or damaged print head. Blocked ink cartridge nozzles, or not removing protective seals correctly when you installed a new ink cartridge can also cause missing lines of print.
The error 500 – Internal Server Error is an error related to HTTP. It means that the website you are visiting has a server issue that prevents the webpage from displaying. The first thing we need to check is whether the Command View EVA service is running or not. The service name is HP Command View EVA.
Windows 10: Right-click and select Control Panel > Hardware and Sound > Devices and Printers. Right-click your product name and select Printer properties.
Restart your computer, and then immediately press the F11 key repeatedly. Click Start . Press and hold the Shift key, click Power, and then select Restart while holding the Shift key. Continue holding the Shift key while the computer restarts.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
In Windows, search for and open Add a printer or scanner . Click Add a printer or scanner, and then wait for Windows to locate available printers. If your printer is found, click it, and then click Add device to complete the driver installation. If your printer is not found, continue with these steps.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
The nozzle check function allows you to check whether the print head is working properly by printing a nozzle check pattern. Print the pattern if printing becomes faint, or if a specific color fails to print.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Print problem with Canon MP620
ANSWER : Open the front of the printer.
Read Full Q/A … :
HP LaserJet 5SI
hp deskjet 960c printing problem
ANSWER : RE: HP 960c printer. I have new cartridges and the test page prints out full color. When printing a color document the page prints in black & white. Why not color? The print page is on color not black & white.
Read Full Q/A … :
HP LaserJet 5SI
when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?
Read Full Q/A … :
HP LaserJet 5SI
Printing Problems
ANSWER : http://www.fixyourownprinter.com/posts/34513
Read Full Q/A … :
HP LaserJet 5SI
problems with printing
ANSWER : Check your settings to make sure they are Left to Right print order. If they are then reinstall printer driver. If that doesn’t correct problem uninstall printer, reboot computer, and reinstall printer.
Read Full Q/A … :
HP LaserJet 5SI
EPSON Stylus NX400 Vista Print Problem
ANSWER : I have the similar issue. The browse button would not open the connection listing the shared printer. How can I fix it? Please respond to this post or contact me via buy essays. Thank you in advance!
Read Full Q/A … :
HP LaserJet 5SI
Printing problem
ANSWER : Either the cartridge carousel jumped out of alignment or the carousel brake solenoid is sticking. Both issues have been covered on the forum before. Do a search.
Read Full Q/A … :
HP LaserJet 5SI
Removing the print head on a Pixma MX 475?
ANSWER : Take out the ink tanks. On the right side there is a plastic release lever. Lift it up and the heads will unlock. Reach in and remove the heads. Take it to the sink and run hot water through the screens on top and then flip it over and run hot water over the heads. Repeat a few times until the water is clear. Reinstall and try again. It might take a couple pages for the print to look good.
Read Full Q/A … :
HP LaserJet 5SI