HP Color LaserJet 4650DN

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The photo tray is overloaded. The paper is curled. The print side, or shiny side, of the paper is not loaded in the tray face down. The paper width guide is too tight against the paper stack.
HP printers will generally work with any high-quality paper with a quality assured preference to HP paper. This means “top quality” papers of a brand other than HP will usually work in your printer.
The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray.
Before you print, make sure in your printer property settings that the correct paper is selected. For example, if you are using one of our glossy sheets, please select either a glossy paper setting or cardstock. If you select plain paper, the ink may run.
In short, yes, laser printers can print on glossy coated paper. As long as the right type of paper is used to allow the toner to fuse with it, great printing results on glossy paper can be achieved with any laser printer.
Make sure that the glossy paper you have is designed for a laser printer. Not for an inkjet printer. If you print an glossy INKJET printer paper in a laser printer, it can cause the paper to burn as it wasn`t designed to withstand the printer`s laser heat.
Dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper jams and paper feed issues. Clean the rollers inside the printer, and then try to print again.
The common reasons for this issue are various, for instance, the paper input tray is overloaded, dust or moisture can affect the paper feed or paper pick rollers, the printer driver is old, etc. Thus, the printer cannot detect the paper that has been inserted into the tray.
There are many different types of Glossy Paper suitable for Inkjet printing. Glossy Paper is most commonly used for high-quality prints to make advertisements, flyers, posters and to print photographs. It gives your print that extra something you or your customer could be looking for.
Special inks are not normally required for printing on these media. Glossy papers can suffer from `bronzing` when prints are made with pigment inks. This indicates the ink is unevenly deposited and/or absorbed by the paper. Viewed from a shallow angle, bronzing produces a greenish bronze tone.
Laser Printer Paper in Inkjet Printer

It`s designed to have toner melted on it. If an inkjet printer prints on laser printer paper, it would result to a print that would easily smear or blot for the coating on the laser printer paper is not designed for ink.

This problem is common for inkjet printing. The common setup for home inkjet printers is to use pigment ink for black and dye inks for color. This is the reason why when it comes to ink not drying well on glossy surfaces, it is always the black ink causing issue.
Inkjet photo papers are not designed to take a high heat and the coating used on this paper could contaminate a laser printer. Because of the simpler paper path in inkjet printers, paper for these are often much heavier than those available for laser printers and would not feed well in them.
HP Photo Paper is designed to print with inkjet printers. If you have a LaserJet printer, choose a glossy or matte HP Business Paper, depending on the finish you need. If you are printing a business document, using HP Business Paper can produce high-quality professional printouts for your office or customers.
Set the print quality setting to higher quality. If you have an HP printer, you want to select HP PHOTO paper for your paper type, when printing on glossy paper. Adjusting your print settings paper type to glossy to match the paper you are printing on typically resolves the ink smearing issue for most people.
Inkjet printers are made for photo printing, offering far better color accuracy and sharpness compared to laser. Yes, printing photos with a laser printer is still possible, but the colors will look duller and some of the finer details may be lost.
Ink may feel dry immediately after printing, but it`s best practice to allow prints to dry for 24 hours. This extended time allows the ink to cure properly on the media surface.
Inkjets and laser printers don`t technically require different paper. You can use a ream of cheap office copy paper and get results that are adequate for most uses.
Open the item you want to print, click File, and then click Print. In the Print window, click Preferences, Properties, or Printer Properties. Click the Paper/Quality tab, and then select the paper from the Paper Size menu, or click Advanced to find and select the paper.
this can happen if a small piece of paper is stuck in the paper path or if the rollers have become covered with lacquer from the paper, try cleaning the pickup rollers and the paper path, with a slightly damp cloth (not wet).
A piece of paper stuck in the paper tray or inside the printer can create a paper jam. Paper jams can occur for a variety of reasons, such as overloading the paper tray, loading different thicknesses of paper in the tray, or using paper that isn`t appropriate for your particular printer.
Low Quality and Improper Storage of Ink and Toner Cartridges. Low-quality cartridges or improperly stored cartridges can cause paper jams. For example, too much toner or ink can be released onto the paper, or the toner or ink can clump together in the cartridge.
Ink is still wet after printing on Glossy Paper and even after ink dries, smudge appears. To resolve this issue ensure that the Media Type setting in the printer driver or the Paper Type setting in the machine`s menu matches the type of paper you are using.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.

Read Full Q/A … :

HP Color LaserJet 4650DN

Lexmark paper feed problems
ANSWER : On my X204n Lexmark laser printer, it was doing the same thing you described – basically sounded like it was trying to pick up the paper from the tray and then failing after several seconds. When you’d open the paper tray, the paper looked like it had been partially taken up with some black scuff marks on the paper that lined up with the rollers that take up the paper. I inspected the rollers and although they looked a bit smooth and worn, didn’t seem like they should be a problem. However, this particular model has just a rubber tire almost like a car tire – the rubber can come off the hard plastic wheel on the inner portion. So I popped off the two rubber “tires”, turned them inside out and put them back on. When turned inside out, the rubber looked nice and … rubbery and had a lot more grippy feeling to them. The very first printing attempt after that and the paper sucked up perfectly with no problems. I think the problem is solved! So if you have similar “tires” that take up the paper, try flipping them and see if it works for you too.

Read Full Q/A … :

HP Color LaserJet 4650DN

Paper Feed Problem on HP R80
ANSWER : In the last examination it is our origination of death which chooses our responses to all the inquiries life puts to us. The most pleasant spot to be is in somebody’s idea; the most secure spot to be is in somebody’s petitions.

Read Full Q/A … :

HP Color LaserJet 4650DN

Error Message "Paper out" when paper loaded
ANSWER : Check your paper tray settings as printer may be looking for paper from the manual feed tray on top of printer.

Read Full Q/A … :

HP Color LaserJet 4650DN

officejet 4500 after paper load problem fixed : little part : where does it go
ANSWER : Sorry the pic didn’t make it. Here it is :

Read Full Q/A … :

HP Color LaserJet 4650DN

paper curl problem
ANSWER : Paper curling is caused either by excess heat or toner on the fuser that sticks to the page. I’ve seen it also caused by heavy bands of printing too close to the top of the page.

Read Full Q/A … :

HP Color LaserJet 4650DN

Error message to load paper and push OK, but not out of paper
ANSWER : I assist the binary options for a long time, and only half this past year I decided to alter the strategy for a better, she called for help Bing and he gave me this web site http://bestoptionstrategies.net .Now I focus on the suitable technique for themselves, and things gone up. I think everybody else faced with this particular problem. I believe my estimation will soon be helpful to you.

Read Full Q/A … :

HP Color LaserJet 4650DN

paper drive wont accept paper
ANSWER : There is probably a small scrap of paper stuck at the left edge of the paper path. The paper hits it and skews to the left. The smaller size bypasses it. You need to shove something stiff, like a piece of file folder, down the paper path and attempt to dislodge it.

Read Full Q/A … :

HP Color LaserJet 4650DN