HP LaserJet 4050T
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Requirements: Operating System – Windows 7, Windows 8, Windows 8.1, Windows 10. Browser – Google Chrome 10+, Internet Explorer (IE)10.0+, and Firefox 3.6. x, 12.0+
On the printer control panel, press the OK button to display the Home screen. Use the arrow buttons to navigate to and open the following menus: Setup → Network Setup → General Settings. On the General Settings menu, select Show the IP Address, and then select Yes to display the printer`s IP address or host name.
If you look at the back door cover of the printer there is a label that has your model number serial number and also includes the date of manufactuer. Hope this helps. If you look at the back door cover of the printer there is a label that has your model number serial number and also includes the date of manufactuer.
A good rule of thumb: if your printer is more than seven years old, you may want to start pricing new units. In this case, even a relatively inexpensive component is not worth the investment.
Requirements: Operating System – Windows 7, Windows 8, Windows 8.1, Windows 10.
The good news is that pretty much any printer purchased within the last four to five years – or any printer that you`ve successfully used with Windows 7, 8 or 8.1 – should be compatible with Windows 10.
IPv4 is composed of 32-bit address length and is the fourth version of the Internet Protocol (IP). IPv6 is composed of 128-bit address length and is the latest updated version of the Internet Protocol (IP).
Find the printer IP address. HP Smart app (Windows, Mac): Open the app, click your printer, and then click the Printer Settings tile to find the IP address. HP Smart app (Android, iOS): Open the app, tap your printer, and then tap Printer Information or Network Information to find the IP address.
From the Home screen on the product control panel, touch the Setup button. Scroll to and touch the Network Setup menu. Touch the TCP/IP Config menu, and then touch the Manual button. Use the numeric keypad to enter the IP address, and touch the OK button.
How to find a printer`s IP address (Windows 10) Open Control Panel > Hardware and Sound > Devices and Printers. Right-click the printer and select Properties. Look in the Web Services tab for your IP address if only three tabs appear.
The most common location to find your product information is on its label. For most HP products the product label is on its bottom, its side, its top, or its back. On some products, it might be inside a battery compartment or behind an access panel.
Select the Start button, then select Settings > Devices > Printers & scanners . Under Printers & scanners, look for your printer. If you see your printer listed, you`ll know it`s installed.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Laser Jet 4700
ANSWER : This is the most confusing post ever posted on this forum. No way you can be helped.
Suggestions for previous generation of HP color laser jets?
ANSWER : You can just replace the drum wiper blades. http://www.uninetimaging.com/c/539/hp-8500-8550-ep-82
HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr
HP Laser Jet 4250 13.01.00 Jam in Tray 2
ANSWER : did you check if there’s multiple feeding while pulling papers
Dell Laser MFP 1600n constant paper jam
ANSWER : I’m having a similar issue, checked you resolution and found the little grey piece seems to be in place and able to rock back and forth. When I send a job to the printer it sounds like it is trying to pick up the paper then I get the ‘Jam 0’ error. Any ideas ?
laser motor squise
ANSWER : That will work good. Use only a little drop of the oil.
Print Quality Issue (Streaks and Ghosting)
ANSWER : Streaks are mostly caused by internal drum wiper blades that clean left over toner off the drum to prepare it for a new image. Ghosting is caused by a leftover image on the drum. The 6 inches that you mention would be the circumference of the part that is causing it. Fusers will never cause either problem.
diagonal stripe pattern
ANSWER : I done and solved this issue dude!!!you can contact me i`ll text you by sms.