HP LaserJet 1300

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

It is caused by an HP printer option called Mopier Mode being enabled by default. This mode causes only 1 copy to be sent to the printer which should then use its internal memory to print the multiple copies. If there is no suitable internal memory only the 1 sent copy gets printed.
Dots are typically caused by foreign material inside the machine (for example paper dust, glue from labels or envelopes, paper clips, staples) sticking to or damaging the surface of the drum. Toner builds up on or sticks to these areas on the drum and creates black dots on the printed pages.
The printer is either low in toner, the density is set too low, or the Economode may be turned on. Remove the toner cartridge and shake it. This will redistribute the toner and often will temporarily solve the problem. However, this usually indicates it is time to install a new cartridge.
The cause of the issue

This is related to a printer driver setting known as the mopier mode. When the mopier mode is enabled, a printer can receive one copy of a document, and print multiple collated copies.

On your PC search control panel, open control panel, Select printer properties, Select the “number of copies” it must be set to 2 change it to 1 and check if it helps. If the issue still persists uninstall the printer software from your PC and install the latest printer drivers.
Here are the most common causes of a printer printing faded text or images: Low ink or toner levels. Toner sticking to the fuser roller or problems with the transfer roller. Low ink or toner density settings.
Paper Jams

This is a common laser printer problem. Primary causes include grime, dust, worn rollers, or incorrect paper weight. The most basic way to prevent paper jams is simply through regular cleaning of your printer. Also, replace parts as needed.

For cleaning, HP recommends using HP Equipment Cleaning Wipes, but you can use an HP-approved lint-free wipe and deionized or distilled water. Note: If dark spots appear on back side of prints, clean drum screen. Note: If minilab prints more than 2000 prints each day, clean drum screen up to twice daily.
An inkjet printer printing lines or missing lines on printouts are caused when the printer cartridges or the cartridge carriage which contains the print head becomes dirty or damaged.
Printers may produce poor quality printing if they are exposed to too much heat. Don`t place your printers in a high-temperature area or near other devices that produce excess heat. In addition, keep them away from windows, where heat and humidity can be high.
Understanding high-quality print settings

The “Best” setting will produce the printer`s best print quality at the slowest printing speed. “Fast” will print a draft quality quick print. DPI: If your printer has an option to select “Maximum DPI,” use this to get the highest resolution print.

Partial prints are a common issue with printers and there are several main reasons it can occur: Problem with the print spooler (on Windows PCs) Overload of the GPU on later model Macs. Dodgy USB cord.
Open the (Devices and) Printers Control Panel. Right-click on the printer, and choose (Printer) Properties. Click the Device Settings tab. Scroll to the bottom of the list, and change “Mopier Mode” to “Disabled”, then click OK.
The Printer will automatically start printing in single cartridge mode if the cartridges are damaged or empty. Do you have an adequate amount of ink left in all the cartridges? Please remove the cartridges and clean the electrical contacts with a Lint-Free cloth.
If your printer is running low on ink, it may start printing blank pages. To check your ink levels, go to your printer`s control panel and select the Ink Levels option. Whenever the ink levels are low, replace the cartridges with new ones. You can also try shaking the cartridge gently to redistribute the ink.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Printing Problems
ANSWER : http://www.fixyourownprinter.com/posts/34513

Read Full Q/A … :

HP LaserJet 1300

Problem with toner
ANSWER : Was that the original problem? If not, then it’s possible you put too much grease on the heater assembly. That would act as an insulator. You just need a thin layer on the heater itself. Otherwise, you can adjust the temperatures in the control panel to apply more heat. Another thing to try is to feed from the Manual Feed tray. That will slow the printing by half and apply more heat.

Read Full Q/A … :

HP LaserJet 1300

Printing problem
ANSWER : Either the cartridge carousel jumped out of alignment or the carousel brake solenoid is sticking. Both issues have been covered on the forum before. Do a search.

Read Full Q/A … :

HP LaserJet 1300

when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?

Read Full Q/A … :

HP LaserJet 1300

problems with printing
ANSWER : Check your settings to make sure they are Left to Right print order. If they are then reinstall printer driver. If that doesn’t correct problem uninstall printer, reboot computer, and reinstall printer.

Read Full Q/A … :

HP LaserJet 1300

Print problem with Canon MP620
ANSWER : Open the front of the printer.

Read Full Q/A … :

HP LaserJet 1300

Chatter from toner cartridges before printing
ANSWER : The video may have the answer you want

Read Full Q/A … :

HP LaserJet 1300

makes hard sound and complain of replace waste toner box, and stop printing
ANSWER : complain waste toner full and it has be remove make a hard sound what is the solution?

Read Full Q/A … :

HP LaserJet 1300