How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
HP 1100, 1200 – While the printer is on, press and hold the Go button for 5 seconds. This will reset the printer.
It is caused by an HP printer option called Mopier Mode being enabled by default. This mode causes only 1 copy to be sent to the printer which should then use its internal memory to print the multiple copies. If there is no suitable internal memory only the 1 sent copy gets printed.
Make sure your devices are properly connected with each other, and the network or the cable you use to connect these devices is normal. You can also try restarting your HP printer. Turn it off completely and unplug the power cord, leave it for a couple of minutes, and then plug the cord back and power on the printer.
Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.
Requirements: Operating System – Windows 7, Windows 8, Windows 8.1, Windows 10.
Because each printer is assigned a unique serial number, when you connect another printer of the same model to your computer, it is recognized as a different machine.
Common causes include dust and grime, worn rollers, or inappropriately weighted paper. Prevent paper jams by regularly cleaning your printer and replacing parts as needed. Check the weight of paper that your printer is rated for as well. The printed product is faded.
1: Check Printer Power, Cables, and Paper
Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.
Most printers will stop working when they`re out of paper, ink or toner, or if the unit detects an issue with the ink or toner cartridge. When this occurs, you might receive an error message or notice blinking green or amber lights on your printer.
Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on. Release the Resume button. The Attention and Ready lights cycle while the product restores factory defaults.
Press and hold the Wireless button and the Cancel button at the same time for at least three seconds. The printer restarts and then the Wireless light starts blinking blue, indicating the printer is in Auto Wireless Connect (AWC) setup mode.