HP LaserJet 4
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
In the Printing Preferences window, click the Services tab, and then click Service this device. The printer Toolbox opens. Click the Device Services tab, and then click Clean the Print Cartridges. In the next box, click Clean.
Remove and reinstall the indicated cartridge slots 2-3 times until it firmly sits in place to override the HP ink cartridge error. After doing this, turn off the printer and remove all the cartridges. Take a dry cloth to clean the contact on the cartridge and carriage to remove any dirt or residue.
View ink cartridge levels from your printer software, or from the printer control panel. Tap the HP Instant Ink icon on the printer control panel to view ink levels. To check page counts and cartridge shipment status, go to HP Instant Ink.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
There are chips inside the original cartridges to record how many pages were printed and they cannot be reset. As a result the printer reads the chips and tells you that the cartridges are empty, even though they are not. This is why you are getting the “ink low” message even though the ink tank is at full capacity.
The reason may be quite simple – your cartridge is dry or clogged. Still, adding fresh ink may not resolve the situation. Try to wipe the cartridge with a lint-free cloth dampened with isopropyl alcohol. Please avoid touching the metal parts of these cartridges and the chip not to damage their electrical contacts.
The quick answer is: Yes, you can (if you own a printer model that allows it) — but you shouldn`t keep printing with an empty cartridge for too long. Why? Because running on an empty cartridge for too long can cause your printhead to overheat resulting in irreversible printer damage.
You can also tell which cartridge is empty by checking the speed at which the error light flashes when the print head moves to the ink cartridge replacement position.
Open the HP printer application and choose the “Clean Printhead” function. You may also be able to choose this option on your printer`s touch screen. This should set the automatic cleaning process in motion. Wait until it is complete before attempting to use the printer.
Fill a bowl with warm water (or a mixture of water and vinegar to clean the printhead) and place the printhead directly in it. Let it sit for five minutes or so. Pull the printhead out of the water and use a lint-free cloth or paper towel to remove the dried ink.
NOTE 1: While warm tap water is most readily available in the home, use of distilled water is suggested as it is technically safer for the printhead as it does not contain calcium or contaminants which could clog ink nozzles and/or impact the printhead`s long term performance.
Yes, you can.
tested the performance of Original HP ink cartridges vs. remanufactured (refilled) brands. The results: Original HP ink cartridges far surpassed ink refills in both print quality and reliability.
Press the button on the chip-reset tool for several seconds until the LED light on the device goes off. Then, unlock the reset tool from the cartridge. Use the resetter with other cartridges and install them back into the corresponding slots in your printer. Voila!
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
Check the LCD print notification screen on your printer. Often, you can press the center button, or “OK” to bypass the low print warning and continue printing.
This error occurs due to the chip on your cartridge still reporting a low or empty ink level from its previous use. The chip itself cannot be reset, so when the cartridge is refilled and then installed into a new machine it will still register as empty.
There`s a chance that the printhead hasn`t been installed properly or has been clogged with dried ink or debris. If this is the case, then cleaning your printhead may resolve the HP ink system error.
When the printer asks you to disable detection, press and hold the Stop button for at least 5 seconds before releasing it. On that color, ink level detection will now be disabled. It will be your obligation to periodically check the cartridges and refill them well before they are empty.
Each printer uses an optical sensor in which shines a light through a prism at the bottom of the ink well. Once ink levels fall to a predetermined level, a beam of light bounces towards a low-ink sensor, which again triggers an on-screen message that tells you to replace the cartridge.
Remove the cartridge indicated in the error message, and then insert the new cartridge into the slot. Repeat these steps to replace any other cartridges indicated in the error message. Close the door or lid to the cartridge access area, and then follow any instructions to align the printer.
Why is it important to clean a laser printer? Printing is vital to all businesses so ensuring your laser printer is thoroughly cleaned is crucial as it allows your machine to continue working efficiently. Cleaning a laser printer is easy with the correct equipment, however they are prone to dust and debris.
Temporarily Printing with Black Ink When Color Ink Cartridges are Expended. When color ink is expended and black ink still remains, you can continue printing for a short time using only black ink. However, you should replace the expended ink cartridge(s) as soon as possible.
Open the Printer Driver Setup Window through the Start Menu. Select Settings, then Devices and finally, Printing Preferences from the menu. Then, click the Maintenance tab and click View Printer Status. This will bring up a window that details the full status of your printer and its ink levels.
On your computer, in the Windows Notification Area (bottom-right corner of your Windows desktop), right-click the printer icon. In the printer menu, select the Properties or Preferences option. In the printer settings window, the ink or toner levels are displayed for the currently-installed cartridge(s).
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Hp 3110 ink system failure
ANSWER : Well I just solved my issue with my hp 3310 displaying the ink error code. I held the OK cancel black and color buttons down at same time. And while holding those down hit the power button when machine shut off I released buttons hit power button on it came on and shut off. Hit power button again and it will reset machine and run a maintainace program. When all is done run a print report. Mine works fine. Good luck.
Read Full Q/A … :
HP LaserJet 4
HP C6280 All in one Ink System Failure
ANSWER : I went through everything HP had to offer and nothing worked. Why didn’t they tell me this???
Read Full Q/A … :
HP LaserJet 4
HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr
Read Full Q/A … :
HP LaserJet 4
Reseting the ink levels for hp c7280,
ANSWER : I held the # and 6 down long enough to start a complete re-set of the printer But the Black ink level still shows as depleted when it is actually still half full.
Read Full Q/A … :
HP LaserJet 4
HP Photosmart C6180 Ink System Failure
ANSWER : This has been a life saver for us. Thank you very much for your help.
Read Full Q/A … :
HP LaserJet 4
HP deskjet 460 Waste ink tank full
ANSWER : I worked fixing printers for 5 years for Verizon and some of the older printers were notorious for the waste receptacle filling and overflowing with ink. My solution was good old warm water. Remove the waste container and scoop out as much as you can with a small screwdriver, wiping the discard on a paper towel, then just run warm water from the faucet into the container till all the residue is removed. This is just water soluble ink folks, if you want to test it, scoop out a glob and dissolve it in warm water, its easy as pie. I never once bought a new ink discard reservoir. I just cleaned out my mobile 460 printer reservoir by the same method. There are no electrical connections its just all plastic.
Read Full Q/A … :
HP LaserJet 4
HP DeskJet 950C Leaking Ink
ANSWER : Thanks for the “loose, white rectangular piece” comment in my 990cse. I found this same white piece of rubber today jamming up the cleaning station carriage assembly and was wondering where it came from!
Read Full Q/A … :
HP LaserJet 4
Black ink in HP G55 casing
ANSWER : Hope someone can help me with a HP Officejet G55 “problem”. I took my G55 apart and cleaned the service station as explained here on this site as it was obviously full of ink “goo” and the printer had refused to print in the middle of a printing, displaying a remove black cartridge etc message even though the HP45 cartridge itself showed it was not even half empty. I had no major problems with the cleaning procedure, but after putting it back together there was “the problem”! The Carriage with the ink cartridges gets stuck just before its about to enter its “home base” over the service station and I get a “fix carriage jam and then push enter” on the screen. I can see and hear that it is the service station that gets stuck just before the “cycle run” of the carriage is about to end. You can hear the service station motor gear slip on the plastic gear mechanism of the service station, not being able to move it any further but tries for a moment with a grinding noise and then stops. Is there some sort of time alignment I need to do between the carriage, service station mechanism and service station motor? Like service station pushed to the back, carriage to the far left etc etc. Ive tried a few “scenarios” but the carriage allways gets stuck in the same place with the grinding noise from the service station/motor “gears”! If I move the carriage by hand it goes from the far right to the far left without any problem. Its just when the service station/motor etc is engaged, that this happens. Hope someone can help me with this problem. Thank you.
Read Full Q/A … :
HP LaserJet 4