HP LaserJet 2400

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Restart devices

If your printer connects to a Wi-Fi network, disconnect your computer or mobile device from the network name (SSID), and then reconnect it to the same network name your printer is connected to. If the printer is available and has a ready status, the issue is resolved.

To use your HP printer in Windows 10 with S Mode, install the HP Smart app (in English) from the Microsoft store. Once the app is installed and connected to your printer, you can print, scan and access features from HP Smart.
Make sure your devices are properly connected with each other, and the network or the cable you use to connect these devices is normal. You can also try restarting your HP printer. Turn it off completely and unplug the power cord, leave it for a couple of minutes, and then plug the cord back and power on the printer.
Start by checking your hardware

If you`re using a wired printer, make sure that the printer cable is properly connected from the printer to your PC. For wireless printers, check the wireless connection. Make sure the printer`s wireless option is turned on and available.

1) Open Control Panel in your computer, and view by large icons or small icons. 2) Click Devices and Printers. 3) Find your printer, right click on your printer (sometimes it may display as Unspecified) and select Troubleshoot. 4) Let your computer troubleshoot the issue and follow the on-screen instructions to fix it.
Ink buildup or debris on the ink cartridge contacts and vents might cause an ink cartridge error. Gather the following materials: A pin to clean any clogged vents. A clean, lint-free cloth.
The PCL XL error could be caused by a temporary communication problem between the system and the printer. A cold restart of the system, networking equipment, and problematic printer may resolve the issue. Turn off the computer, printer, and networking equipment (routers, extenders, etc.).
If your printer is compatible with Windows 10, download and run the Print and Scan Doctor to detect and fix isses. If problems persist, reinstall the latest HP printing software. Download and Install the latest HP printer software and driver.
Do a hard reset on your printer. To do this you just need to turn off your printer, unplug for a few minutes and then plug the printer again. If that still doesn`t work, try turning the printer and your computer off, and then start it back up again. Try uninstalling and then reinstalling your printer driver.
Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.
Wi-Fi printers

Go to the Start menu and click Settings, Devices, then Printers & scanners. Select Add a printer or scanner and wait for your printer to appear in the list, then select it and hit Add device. If Windows doesn`t find your printer, select The printer that I want isn`t listed and follow the instructions.

Your printer should have been packaged with a USB cable regardless of whether it is a wireless or wired printer. Plug the cable into your printer and your computer`s USB port. The direct linking should trigger your computer to recognize the printer and start up the software needed to complete the installation.
The error 0x00000490 indicates that the client cannot connect to the printer.
Open Settings -> Devices -> Printers and Scanners (or run a quick access URI command: ms-settings:printers ); Select a printer you want to remove and click Remove Device; Confirm the printer removal.
Typically this message means that the ink system has failed.
Turn the printer off then back on. If the issue persists, turn the printer off, unplug the power cord and then wait at least three minutes before plugging the power cord back in and turning the printer back on.
File Formats: Printer Command Language Format (PCL)/(PCL XL)/(PLT) The Printer Command Language (PCL) vector format was developed by Hewlett-Packard specifically to allow computers and printers to communicate with each other. The PCL files consist of commands. HP printers parse and decode those commands.
PCL is a trademark of the Hewlett-Packard Company. Printer Control Language, or PCL, is a common printing language used widely by many different printer manufacturers. PCL is supported by many different operating systems which allows for the same printer to work in many different environments.
Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on. Release the Resume button. The Attention and Ready lights cycle while the product restores factory defaults.
The good news is that pretty much any printer purchased within the last four to five years – or any printer that you`ve successfully used with Windows 7, 8 or 8.1 – should be compatible with Windows 10.
Color Laser Printer or Black & White Laser Printer

As print quality goes down over time, this will be a reason to replace the color printer. We find a black and white printer can sometimes last 10 years or more and most color laser printers are replaced every 3 to 5 years.

The default administrator or root password for all HP-provided Build Plans is: ChangeMe123! CAUTION: HP strongly recommends changing this password before deploying to any servers. See Set (encrypt) the administrator/root password for details.
Essentially, it is the code that tells the printer what to do and how to do it. Printer manufacturers roll out firmware updates from time to time to keep their printers functioning correctly and efficiently. These updates can fix bugs, strengthen security, and add new features.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP psc 2110 all-in-one won't turn on after power o
ANSWER : left the printer on now i cant get the printer to go on

Read Full Q/A … :

HP LaserJet 2400

HP PSC 1610 – problem installing hardware
ANSWER : If you want to get proper detailed information about hp printer then you should call on 1-888-924-2961 toll free number. They provide you step by step methods of installation process and driver support services.

Read Full Q/A … :

HP LaserJet 2400

HP PSC 1510 copying problems
ANSWER : my hp photocopy is not working

Read Full Q/A … :

HP LaserJet 2400

HP PSC 2510 all-in-one network setup problems
ANSWER : Assemble the accompanying things:

Read Full Q/A … :

HP LaserJet 2400

hp 2510 all in one
ANSWER : my paper won’t feed in my all in one Hp2510 printer

Read Full Q/A … :

HP LaserJet 2400

HP PSC 1610 ALL-IN-ONE
ANSWER : hy,

Read Full Q/A … :

HP LaserJet 2400

HP PSC 1210 Service Manual?
ANSWER : Hi Abe,

Read Full Q/A … :

HP LaserJet 2400

HP PSC 2410 clicking noise problem
ANSWER : I have the same issue… I’ve tried everything above… I don’t believe it’s dust as this happens on and off occasionally… I think I may need to make a youtube video of me “fixing” this printer! I’m really frustrated with this thing!! If it doesn’t work soon, I’m gonna by the solution in the form of a hammer!

Read Full Q/A … :

HP LaserJet 2400