HP PSC – Printer / Scanner / Copier 2350
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Firstly, set up your printer hardware and install the latest version of the HP driver and software. Now, place your document on the scanner glass of your printer and then press the Settings button on the software program. Next, choose the type of file you want to scan. Then, tap on Scan Picture or Scan Document.
To be specific, you should make sure that your printer has sufficient paper, ink or toner and without paper jam. If the printer cartridge`s status is faulty, you should replace it with a new one. After carrying out these operations, check if the HP printer can print properly. If not, try other methods immediately.
Unplug and restart your printer Sometimes power-cycling your printer can resolve the issue. Turn off your printer and unplug it, wait 30 seconds, plug your printer back in, and then turn the printer back on.
Click the Scan tile on the HP Smart app home screen. Select an option from the top menu bar. Scanner: Place the original on the printer scanner glass or into the automatic document feeder (ADF). Select scan job type, size, color, and resolution settings, and then click Scan in the lower right corner.
Reset. Resetting the printer stops printing and clears the current print job received from the active interface. You may want to reset the printer when there is a problem with the print job itself and the printer cannot print successfully.
- Power the printer off completely.
- While the power is off, simultaneously hold down the Menu>, Go, and Select buttons.
- While still holding down the buttons, power the printer back on. Release the buttons when Restoring Factory Defaults appears on the display.
- Allow the printer to warm up as normal.
Solution one: Reset the product
- With the printer turned on, disconnect the power cord from the rear of the printer.
- Unplug the power cord from the wall outlet.
- Wait at least 15 seconds.
- Plug the power cord back into the wall outlet.
- Reconnect the power cord to the printer.
- Turn the printer on.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
HP PSC 950 All in one Printer
ANSWER : Just leaf through our prearranged folder and find a HP PSC 950xi All-in-One Printer driver that need someone to write my college essay fits your requirements.
HP psc 2110 all-in-one won't turn on after power o
ANSWER : left the printer on now i cant get the printer to go on
hp 2510 all in one
ANSWER : my paper won’t feed in my all in one Hp2510 printer
PRINTER MX 320 CANON ALL IN ONE PRINTER
ANSWER : Probably a worn feed roller. You can try cleaning it with a damp rag as it might just be covered with paper dust.
newly installed printer…can scan but cant be set as a default printer???
ANSWER : ITS AN EPSON L210…
HP laser jet 3015 "Upgrade Error Call HP Support"
HP P1007 Printer Engine Scanner Error
ANSWER : My hp laserjet p1007 printer shows a massage that engine communication error
HP Laserjet printer page counter backward move
ANSWER : On all HP laserjet printers if you power them off the page count will decrease back to the nearest 10. For example, if the page reading is 123,799 and you power it off, the page count will go back to 123,790.