HP CopyJet Color

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Check the ink levels

Sometimes, the printer may not print black ink because it is low or empty. You can check the ink levels on the printer`s display, or by using the software that came with your printer. If the ink level is low, replace the cartridge or refill it according to the manufacturer`s instructions.

Check you have the latest drivers installed for your printer, try uninstalling and reinstalling your printer drivers or try changing the driver settings (adjusting the paper settings has been known to solve the problem). Fully Reconfigure the Printer – If all else fails, you can try entirely reconfiguring your printer.
Press your printer`s Setup button. Go to System Setup. Choose Print Quality and then Calibrate Color. Choose Calibrate Now and press OK.
If your HP printer not printing black ink correctly, here`s what you should do. Using non-genuine ink cartridges. Printheads that have become clogged. Ink cartridges that are defective or empty.
Even when you are printing black text only, a small amount of color ink is used to keep the print head charged. The print head needs to be kept charged to prevent air bubbles from entering and damaging the print head.
Printers that use two cartridges (one black, one tri-color) can print if one cartridge is empty. To continue printing, remove the empty cartridge from the printer. If a Single-cartridge mode message displays, select OK. If you are using the black cartridge, prints are in black and white (grayscale).
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
Whether you use an HP printer or any other, you can make it possible to print in black while your printer screen is showing the color cartridge empty notification. All you need to do is reset your printer first and then, make certain print settings i.e open the option of “Print in Grayscale”.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
When color ink is expended and black ink still remains, you can continue printing for a short time using only black ink. However, you should replace the expended ink cartridge(s) as soon as possible.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
Go to your computer and click “Print” from the file that you wanted to print. Click on “Properties” and then the “Color” tab next. Select the “Print in grayscale” option by clicking on its checkbox. You can now start printing in black and white.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Hp printer not printing
ANSWER : Check estimated ink levelsFollow these steps to check the estimated ink levels.

Read Full Q/A … :

HP CopyJet Color

HP Photosmart 8750 intermittent serv. stat. stuck
ANSWER : I had this error after the printer sat idle for many months. I thought it was the cartridge drive belt stretching, because it was extremely loose and wouldn’t move the carriage due to slippage. Then I noticed there was a gear belt tensioner to the right side that had some movement. Sure enough, when I shined a flashlight into the ink reservoir, there was a spring that had fallen down inside. Looking at the plastic belt tensioner, it looks as if the spring was held on by a plastic post that had broken off. This is most likely the cause of many of these errors, because the plastic break is very clean and not readily visible, (a design flaw in my opinion). Rather than trying to replace the part, I am going to try tapping a hole in the plastic and inserting a machine screw that can hold the tension spring in place. It also looks like the metal notch for the right hand loop of the spring, would not prevent the spring from slipping off at some point, so using a metal file to enlarge the notch may be necessary. If you’re lucky, your spring may have just popped off and is inside the ink reservoir. This may be one reason why the printer was discontinued so soon. One lousy five dollar part makes the whole printer worthless… I use this this printer primarily because it is easy to clean the heads by removing the carts, instead of having to disassemble the whole damn thing, as in ink tank designs. It makes beautiful 13×19 prints with better color accuracy than my Vivera 6 ink printer.

Read Full Q/A … :

HP CopyJet Color

HP DeskJet 1220C Prints only Pink & Black
ANSWER : hi everyone. i have an hp ink advantage 5525 all-in-one. changed all cartridges as they were empty and when i tried to print i got blank pages. i gave a print order a couple times to find out what was going on and found out that yellow and magenta inks worked but not cyan and black. removed cartridges, clean and all many times and nothing happened. then i tried this youtu.be/f57jOGj-G5s and the print quality of magenta and yellow improved significantly but still no black or cyan at all. i can’t do the running water thing because the print head is not detachable. any suggestions?

Read Full Q/A … :

HP CopyJet Color

help with hp photosmart 7760
ANSWER : MIne is doing the same thing tonight!!

Read Full Q/A … :

HP CopyJet Color

black cartridge not printing
ANSWER : https://www.youtube.com/watch?v=thrZtvAhKm0

Read Full Q/A … :

HP CopyJet Color

HP Laserjet 1320tn printing grey instead of black
ANSWER : Try this test. Put a page into the manual feeder and do that same test. When the end of the page is just about to enter the printer, open the lid. Take out the toner cartridge and pull back the shutter. Look at the image and see if it is black. The explanation is that there is high voltage going to both the toner cartridge and the charge transfer roller below it. If the image on the drum is black, then the fault is at the transfer roller not getting enough high voltage. The transfer roller pulls the image off of the drum and down onto the paper. It would not be a laser scanner problem as any issue with it would not result in an overall gray image, but combination of gray and black. It will probably turn out to be a bad HV power supply, which will need replacement. I’ve never seen this particular problem on this model.

Read Full Q/A … :

HP CopyJet Color

PRINTER FAILS TO PRINT BLACK TEXTS/IMAGES
ANSWER : https://www.youtube.com/watch?v=f57jOGj-G5s

Read Full Q/A … :

HP CopyJet Color

want to print in black only
ANSWER : You can do a few things & see how it works.

Read Full Q/A … :

HP CopyJet Color