HP LaserJet 2410

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Printer Reset
  1. Press and hold cancel button.
  2. Partial Reset: # 3, press and hold pound key along with the 3 key.
  3. Semi Total Reset: # 6.
  4. Total Reset: # 9.
Install HP Smart app to complete setup and support
  1. Install printer software and drivers.
  2. Create an HP account and register your printer.
  3. Connect your printer to Wi-Fi, load paper, and install cartridges.
Install a printer in Windows
  1. On the taskbar, select the Search icon, type Printers in the search bar, and then select Printers & scanners from the search results to open the Printers & scanners system setting. …
  2. Next to Add a printer or scanner, select Add device.
Connect the printer with the Wireless Setup Wizard (printers with a touchscreen)
  1. Place the printer near the Wi-Fi router.
  2. Open the Setup, Network, or Wireless settings menu, and then select Wireless Setup Wizard.
  3. Select the name of your network, and then enter the password to complete the connection. Note:
It`s a pretty simple process:
  1. With the printer turned on, pull out the power cable from the back of the printer.
  2. Unplug the power cable from the wall outlet.
  3. Wait 15 seconds.
  4. Plug the power cable into the back of the printer.
  5. Plug the printer back into the wall outlet.
  6. Turn the printer back on.
  7. Run a test print.
22 juin 2023
9.20. 6. How to reset to factory settings on HP printers
  1. Open the printer`s web page and Sign in as Administrator.
  2. On the General tab select Reset Factory Settings in the menu.
  3. In the section Reset Firmware select Reset.
  4. Select Reset. The printer will now restart.
  5. Set printer`s date and time correctly.
Check the printer setup
  1. Make sure your printer is on, then select Start on your computer.
  2. Select Settings > Devices > Printers & scanners.
  3. If you don`t see your printer listed, select Add a printer or scanner and wait for it to find nearby printers.
  4. Select your printer (look for the manufacturer name and model number).
11 janv. 2022
9.20. 6. How to reset to factory settings on HP printers
  1. Open the printer`s web page and Sign in as Administrator.
  2. On the General tab select Reset Factory Settings in the menu.
  3. In the section Reset Firmware select Reset.
  4. Select Reset. The printer will now restart.
  5. Set printer`s date and time correctly.
  1. Power the printer off completely.
  2. While the power is off, simultaneously hold down the Menu>, Go, and Select buttons.
  3. While still holding down the buttons, power the printer back on. Release the buttons when Restoring Factory Defaults appears on the display.
  4. Allow the printer to warm up as normal.
22 juin 2023

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP PSC 2410 Carriage Jam
ANSWER : Hi All,

Read Full Q/A … :

HP LaserJet 2410

help with hp photosmart 7760
ANSWER : MIne is doing the same thing tonight!!

Read Full Q/A … :

HP LaserJet 2410

HP Photosmart 8750 intermittent serv. stat. stuck
ANSWER : I had this error after the printer sat idle for many months. I thought it was the cartridge drive belt stretching, because it was extremely loose and wouldn’t move the carriage due to slippage. Then I noticed there was a gear belt tensioner to the right side that had some movement. Sure enough, when I shined a flashlight into the ink reservoir, there was a spring that had fallen down inside. Looking at the plastic belt tensioner, it looks as if the spring was held on by a plastic post that had broken off. This is most likely the cause of many of these errors, because the plastic break is very clean and not readily visible, (a design flaw in my opinion). Rather than trying to replace the part, I am going to try tapping a hole in the plastic and inserting a machine screw that can hold the tension spring in place. It also looks like the metal notch for the right hand loop of the spring, would not prevent the spring from slipping off at some point, so using a metal file to enlarge the notch may be necessary. If you’re lucky, your spring may have just popped off and is inside the ink reservoir. This may be one reason why the printer was discontinued so soon. One lousy five dollar part makes the whole printer worthless… I use this this printer primarily because it is easy to clean the heads by removing the carts, instead of having to disassemble the whole damn thing, as in ink tank designs. It makes beautiful 13×19 prints with better color accuracy than my Vivera 6 ink printer.

Read Full Q/A … :

HP LaserJet 2410

HP PSC 2410 clicking noise problem
ANSWER : I have the same issue… I’ve tried everything above… I don’t believe it’s dust as this happens on and off occasionally… I think I may need to make a youtube video of me “fixing” this printer! I’m really frustrated with this thing!! If it doesn’t work soon, I’m gonna by the solution in the form of a hammer!

Read Full Q/A … :

HP LaserJet 2410

HP PSC 2510 all-in-one network setup problems
ANSWER : Assemble the accompanying things:

Read Full Q/A … :

HP LaserJet 2410

Reseting the ink levels for hp c7280,
ANSWER : I held the # and 6 down long enough to start a complete re-set of the printer But the Black ink level still shows as depleted when it is actually still half full.

Read Full Q/A … :

HP LaserJet 2410

HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr

Read Full Q/A … :

HP LaserJet 2410

HP psc 2110 all-in-one won't turn on after power o
ANSWER : left the printer on now i cant get the printer to go on

Read Full Q/A … :

HP LaserJet 2410