HP OfficeJet 9110

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If roll paper does not feed, cut the end straight across and uncurl it by rolling it backward, if necessary. Then reload the paper. If thick media does not feed, make sure you are loading it straight into the product, not at an angle. If paper jams when you print on both sides of the paper, try loading fewer sheets.
A piece of paper stuck in the paper tray or inside the printer can create a paper jam. Paper jams can occur for a variety of reasons, such as overloading the paper tray, loading different thicknesses of paper in the tray, or using paper that isn`t appropriate for your particular printer.
Select > Paper Setting > paper source > Print Adjustments > Paper Feed Adjust.
The paper has holes along both sides that fit over the sprockets located on the feeder wheel. When the wheel turns, it feeds the paper into the printer. The holes are torn off the paper after the printout is complete. And, yes, printers still use this type of feeder mechanism.
If the paper feed rollers are dirty or paper powder is attached to it, paper may not be fed properly. In this case, clean the paper feed rollers. Cleaning will wear out the paper feed rollers, so perform this only when necessary. Make sure that the power is turned on and remove any paper from the rear tray.
Make sure you don`t overload the tray. A good way to stop the printer becoming jammed, is to fan the paper before you put it in the tray as this will shake out any dust and reduce static, which are two major causes of paper jams. Another way to avoid a printer paper jam is to keep your machine clean.
Did you know most copier paper jams are caused by the paper itself? Misaligned paper. When a stack of paper isn`t aligned properly in the machine, it often causes a paper jam issue. When adding a ream of paper, always fan the paper, load carefully and avoid overstuffing the tray.
The manual feed slot is located on the front of your printer. It can be closed when not in use, making the product more compact. Use the manual feed slot to print transparencies, labels, envelopes or postcards in addition to making quick runs of paper types or sizes that are not currently loaded in the paper tray.
For cleaning, HP recommends using HP Equipment Cleaning Wipes, but you can use an HP-approved lint-free wipe and deionized or distilled water. Note: If dark spots appear on back side of prints, clean drum screen. Note: If minilab prints more than 2000 prints each day, clean drum screen up to twice daily.
The roller-type positive feed seed metering mechanism consists of two rollers with 45° inclined ends assembled on a hexagonal shaft such that the gap width between the rollers can be adjusted. The rollers rotate inside a circular tube fitted below the hopper.
Paper Feed Rollers

Created with a blending technology developed based on our extensive experience, these materials offer both a high friction coefficient retaining characteristic and superb abrasion resistance. We also mass-produce belt-shaped samples, in addition to ordinary rolls.

Dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper jams and paper feed issues. Clean the rollers inside the printer, and then try to print again. Turn off the printer, and then disconnect the power cord.
A paper jam is when paper or other printed material gets stuck or lodged in a printer and cannot eject.
A device that is designed to pass paper through a printer. The friction feed is fed through by rollers and work well with most paper. Friction feed printers are different from tractor feed printers, which require special paper with holes on each side of the paper. Today, all inkjet and laser printers are friction feed.
The Manual Feed message appears when Manual is chosen as the paper source in the printer driver and there is no paper in the manual feed slot.
Use the operator panel on the printer to enter the menus. Locate the Paper Menu and select that menu. Locate the Paper Size/Type setting and select that. Find and select MP Feeder or Multipurpose Feeder and select that.
This is often caused by the fact the pick-up roller is worn out. The layer of rubber around this plastic part overtime gets too smooth, preventing paper from feeding properly into the printer. This fix is not really hard, will take no more than half an hour and costs around 10,- (Euro or Dollar).

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.

Read Full Q/A … :

HP OfficeJet 9110

I just bought an officejet 3830 2 weeks ago. Now it won't print at all! Says inkjet jam. It's not! I've done all the fixes as per hp's website now what?
ANSWER : Take it back and exchange it under warranty.

Read Full Q/A … :

HP OfficeJet 9110

Paper Feed Problem on HP R80
ANSWER : In the last examination it is our origination of death which chooses our responses to all the inquiries life puts to us. The most pleasant spot to be is in somebody’s idea; the most secure spot to be is in somebody’s petitions.

Read Full Q/A … :

HP OfficeJet 9110

hp 8600 pro when power on, paper jam message appear but there is no paper jam in the tray
ANSWER : Hp 8180 Photosmart All In One code keeps says paper jam and carriage jam when neither are jammed. I followed all the recommended things to do. I live in Raleigh NC any place to take this or any suggestion.

Read Full Q/A … :

HP OfficeJet 9110

HP Officejet Pro L7680-problems w/black print head
ANSWER : VLCM Print tech supporters are very helpful to support printing related issues. They are industry certified technicians. they have 12+ years of handful experience. visit page – vlcmprint.com

Read Full Q/A … :

HP OfficeJet 9110

hp officejet pro 1150c
ANSWER : great

Read Full Q/A … :

HP OfficeJet 9110

HP DeskJet 722C Paper Feed Problem
ANSWER : Detach the force string from the holding nothing back one and expel all paper from it.

Read Full Q/A … :

HP OfficeJet 9110

paper feed issue
ANSWER : Stuck paper pickup solenoid. It is mounted on the side of the printer and is supposed to engage and allow the roller to turn one revolution. You need to take the cover off, remove the solenoid. Take the spring loaded plate off and scrape off all the goo that it is stuck too. Then you should replace it with some thin sticky backed felt available at the local hardware store.

Read Full Q/A … :

HP OfficeJet 9110