HP LaserJet P4015N

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Restart the printer and the computer or mobile device to clear possible error conditions. Restore Wi-Fi setup mode. Most printers with a touchscreen display or menu: Open the Wireless or Setup menu, select Network setup or Settings, and then select Restore Network Settings.
This is a rotational error on a fan. This fan is the located on the left hand side (when you are facing the front) and is the one located closer to the back.
From the Home screen on the product control panel, touch the Setup button. Scroll to and touch the Network Setup menu. Touch the TCP/IP Config menu, and then touch the Manual button. Use the numeric keypad to enter the IP address, and touch the OK button.
Check the USB cable for damage and recommended length, and then restart your printer and computer. Turn off the printer and the computer. Disconnect the USB cable from the computer and printer, and then inspect the cable. If the cable is damaged or longer than 3 m (9 ft 10 in), replace it.
The printer must be plugged in, powered on, and within range of the wireless network. Moving the printer or router even a few feet can disrupt the Wi-Fi connection between the two, especially if there are walls, supports, or metal filing cabinets in the vicinity.
Place the printer near the Wi-Fi router. Open the Setup, Network, or Wireless settings menu, and then select Wireless Setup Wizard. Select the name of your network, and then enter the password to complete the connection.
The fan on the left side of the printer is not working right. Remove the top cover and the left side cover and see if the fan is turning and if not if just gummed up over the years remove the fan and clean it up to get it spinning again. If that does not work, then the fan will need to be replaced.
Simply plug the USB cable from your printer into an available USB port on your PC, and turn the printer on. On the taskbar, select the Search icon, type Printers in the search bar, and then select Printers & scanners from the search results to open the Printers & scanners system setting.
Make sure that both ends of the USB cable are correctly inserted into the computer and the printer. Try disconnecting and reconnecting the USB cable at both ends. Disconnect the printer and the computer and reconnect them. Try another USB port if available.
Select the Start button, then select Settings > Network & Internet > Wi-Fi. Under Related settings, select Change advanced sharing options. In the Advanced sharing settings dialog box, expand the Private section. Next, under Network discovery, select Turn on network discovery.
41.3 Paper Size Error. HP`s User Guide for the P4014, P4015 and P4515 printer series says: This is typically caused if two or more sheets stick together in the product or if the tray is not properly adjusted . Reload the tray with the correct paper size.
HP LaserJet P4014 & P4015 series

Press and hold the down arrow until all three lights on the control panel are lit. Press the up arrow, press Menu the message SKIP DISK LOAD displays on the control panel. Press the up arrow until NVRAM INIT is highlighted, and then press OK.

The 51.01 and 51.1 errors are fairly common error codes on the HP LaserJet 4100, 4100N, 4100TN, and 4100DTN series printers. This error indicates a failure with the laser scanner assembly, which is a high-failure part on these models.
In the Devices and Printers window click on Add a printer. Choose “Add a local printer or network printer with manual settings”, then click Next. Select Create a new port and choose Standard TCP/IP Port, then click Next. Under Hostname or IP address: Type in the IP address of the printer you intend to connect to.
On the printer control panel, press the OK button to display the Home screen. Use the arrow buttons to navigate to and open the following menus: Setup → Network Setup → General Settings. On the General Settings menu, select Show the IP Address, and then select Yes to display the printer`s IP address or host name.
On the printer control panel, press and hold the Wireless button for at least 3 seconds or until the wireless light starts to flash. On the router, press and hold the WPS button for 3 to 5 seconds or until it shows that the WPS connection process has started.
By connecting a printer via wired LAN, you can share the printer over a faster and more stable connection than Wi-Fi. You will also have less chance of having problems such as being disconnected from the network while printing.
Yes, you can connect the printer to a computer with a USB cable and a wireless network.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP LJ 4350 – Tray 2 not lifting, no motors turn.
ANSWER : I can’t believe, pieces of paper was under the registration flap, now my 4250N is working.

Read Full Q/A … :

HP LaserJet P4015N

HP LJ 1150 Printing multiple pages on one sheet?
ANSWER : Hey friends.

Read Full Q/A … :

HP LaserJet P4015N

How to copy a card slot in HP laserjet 4250N
ANSWER : None that I know of, using a computer is likely your best option but I never attempted it.

Read Full Q/A … :

HP LaserJet P4015N

HP PSC 2510 all-in-one network setup problems
ANSWER : Assemble the accompanying things:

Read Full Q/A … :

HP LaserJet P4015N

Good toner cartridges still available for HP LJ 4V?
ANSWER : Try directpreciseimaging.Com in Calif. Don’t worry about resistance unless there is none.

Read Full Q/A … :

HP LaserJet P4015N

HP LJ P3015
ANSWER : well ^%$#(&^%[[[[

Read Full Q/A … :

HP LaserJet P4015N

HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr

Read Full Q/A … :

HP LaserJet P4015N

add memory to HP LJ 5p?
ANSWER : Adding memory to your phone can allow you to get free pokecoins hack online at this website for free.

Read Full Q/A … :

HP LaserJet P4015N