HP LaserJet IIIP+

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If the paper guides are too tight, the paper might be held in the tray and not allowed to feed into the product. Try the print job again.
The output bin is a bin on the printer where printed jobs are delivered. Users can use the input-tray and output-bin job attributes to specify a tray name, such as 3-hole and a bin name, such as staple .
Solution. Open the tray for more than one second, verify that paper is loaded, and then close the tray. This should eliminate the “Tray Empty” message so the printer can resume printing.
The common reasons for this issue are various, for instance, the paper input tray is overloaded, dust or moisture can affect the paper feed or paper pick rollers, the printer driver is old, etc. Thus, the printer cannot detect the paper that has been inserted into the tray.
Pick up the front of the tray, pull it out slightly, and lower the tray back down so it is level. Pull the right side of paper tray out. Move the paper tray to the right and take the tray out of the machine.
A paper tray is part of a printer and is used to store and feed paper to the printer. Generally printers will have multiple paper trays. Tray 1 or the bypass tray. The bypass tray on a printer is generally a fold down compartment that allows you to easily use different styles or sizes of paper.
Tray 2 holds up to 250 sheets of 75 g/m2 paper.
Open Tray 1. Pull out the tray extension to support the paper. Use the adjustment latch to spread the paper guides outward. Load paper in the tray.
Open the Printers and Faxes window, right click on the printer, and choose “Properties.” There should be a “Printing Preferences” option there. Anything you set there becomes the default for all future printing.
Check the paper rollers and clean any particles of dust or dirt if you continue getting error messages indicating there is no paper in the printer. Make sure the stack of papers isn`t crumpled or bowed. Remove the stack of papers and replace the tray. Replace the paper and take it out again.
The paper tray is empty or overloaded. The paper is curled. The print side, or shiny side, of the paper is not loaded in the paper tray face up. For photo paper, always load the rougher side of the paper facing down.
The printer uses a separator pad in the media tray to help separate sheets of media being drawn from the tray.
The tray settings determine how the printer manages the paper trays. Tray Mode: This option determines if users are prompted to confirm or modify paper settings when they insert a paper tray into the printer. There are three modes: Fully Adjustable, Dedicated, and Bypass.
The system tray (or “systray”) is a section of the taskbars in the Microsoft Windows operating system (OS) user interface that provides easy access icons to the user`s most commonly used apps and displays the clock. A system tray is also available in other OSes such as Linux, Mac OS, Android and iOS.
noun. a flat, shallow container or receptacle made of wood, metal, etc., usually with slightly raised edges, used for carrying, holding, or displaying articles of food, glass, china, etc. a removable receptacle of this shape in a cabinet, box, trunk, or the like, sometimes forming a drawer.
Improve printer performance by selecting the optimum paper type for the tray. You can select from the following paper types: Tray 1. [Thin Paper], [Thick Paper 1], [Thick Paper 2], [Plain Paper], [Recycled Paper], [Color Paper], [Preprinted], [Prepunched], [Letterhead], [Bond Paper], [Cardstock], [Label Paper]
Tray protection

This will be used to prevent like paper from being fed if Auto Switching is ON. Press Printer Setup > Tray Settings > Settings > Tray Protection.

Tray 1 is the small slot in the front for manually feeding paper. The paper cassette which holds the paper and slides out is called tray 2.
Press the “Menu” key, then use the arrows to select “Paper Handling” then “Tray 2 Size”. Since you have A4 loaded, it should show “A4”. If it shows anything other than “A4”, open the tray and adjust the Length and Width guides so that they are set to “A4”, close the tray and check the menu again.
Paper Trays 1 – 4

Letter (216 x 279 mm / 8.5 x 11 in.) Folio (216 x 330 mm / 8.5 x 13 in.) Legal (216 x 356 mm / 8.5 x 14 in.) Tabloid/Ledger (279 x 432 mm / 11 x 17 in.)

Manage Default Printers in Windows 10. Launch Settings from the Start menu or press Windows key + I then click Devices. Select the Printers & Scanners tab, then scroll down. Toggle off the setting When turned on, the default printer is the last printer used.
Press [Machine Features Settings] on the Settings screen. Press [Fax Settings] [Reception Settings] tab [Specify Tray for Lines]. Press [On], and press the line to specify. Select the tray to deliver the output paper, and then press [OK].
Clean the print head, if necessary. Make sure the paper size, orientation, and layout settings in your printer software are correct. Make sure your document does not contain blank pages. If your printer software has a Preview option, you can check for blank pages before you print and remove them, if necessary.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

hp 8600 pro when power on, paper jam message appear but there is no paper jam in the tray
ANSWER : Hp 8180 Photosmart All In One code keeps says paper jam and carriage jam when neither are jammed. I followed all the recommended things to do. I live in Raleigh NC any place to take this or any suggestion.

Read Full Q/A … :

HP LaserJet IIIP+

Paper jam in tray 2 (but no paper pulled from tray) also M476DN models
ANSWER : Isopropyl alcohol is not recommended for rubber rollers. It dries out the rubber and hasten it’s cracking and breaking. It will do nothing to restore the grip. Those rollers are really hard to replace. It would be easy if that dumbass secondary menu really worked. None of the techs I’ve spoke to ever got into it. Everyone I know sends a print job and listens for the roller to rotate into position where you can pull it off.

Read Full Q/A … :

HP LaserJet IIIP+

My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.

Read Full Q/A … :

HP LaserJet IIIP+

Tray 1 (upper tray) paper feed problem
ANSWER : There is no way of adjusting the distance of lift. Could be that the pickup roller is worn enough that it will pick up a sheet that is higher, but not one that is lower down. You can look at the end of the roller that first makes contact and see if it is worn smooth.

Read Full Q/A … :

HP LaserJet IIIP+

What repair needs to be done for a "50 needs repair" message on an HP Laserjet IIIP?
ANSWER : I don’t know what you mean by good toner cartridges. They haven’t been built in about 10 years, so if they are new OEMs in the box, they are guaranteed to fail. The 50 error on that printer is mostly a burned out fuser lamp. This site was sold, so as you can see, there are no more kits available.

Read Full Q/A … :

HP LaserJet IIIP+

HP LJ 4350 – Tray 2 not lifting, no motors turn.
ANSWER : I can’t believe, pieces of paper was under the registration flap, now my 4250N is working.

Read Full Q/A … :

HP LaserJet IIIP+

Printer stops pulling paper from tray 2 after a few sheets
ANSWER : Sticking pickup roller solenoid. Pretty easy fix. You need to remove the right side covers. The back one just slides off, but the top holds the front one. I usually just take the 2 right side screws off and gently lift the top enough to pop off the side panel. Open the metal door on the formatter assy. Then release the tab in the middle. There’s also a tab at the front of the panel. When putting it back on, make sure you engage the rocker switch and the metal rod before pushing it into place. When you get it open, you’ll see the solenoid at the bottom front. There’s 1 screw holding it in place. Remove it and take the top plate and spring off. Be careful not to lose the spring. Then scrape off the gooey crap on top and clean off the plate as well. I put a piece of thin sticky backed felt in place of the remnants of the disintegrating sponge that HP uses. You can find it at the hardware store used for the bottom of chair legs.

Read Full Q/A … :

HP LaserJet IIIP+

HP 4250n 41.3 unexpected paper size
ANSWER : BULLSHIT

Read Full Q/A … :

HP LaserJet IIIP+