HP LaserJet 2

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

just GOTO settings > printer properties of your printer > preferences>paper quality >change the paper to A4 size . and restart the printer.
Tray 2 lift error can be caused by a damaged, dislodged cartridge contact in the body of the printer, which would explain why multiple cartridges do not solve the problem. Open the cartridge door, remove the cartridge and inspect the contacts on the left side, they should look the same as the picture below.
On the Windows taskbar, click the Windows icon ( ), and then click Devices and Printers. Right-click your product, and then select Printing Preferences. From the Printing Preferences menu, select Paper/Quality. From the Paper Source drop-down menu, select Tray 2.
Sometimes paper can get stuck behind the tray and get stuck in the sensors and arms that detect paper size and detection. You can remove the tray completely from the machine and look at the feed unit and rollers and make sure there is no obstruction or paper stuck.
If roll paper does not feed, cut the end straight across and uncurl it by rolling it backward, if necessary. Then reload the paper. If thick media does not feed, make sure you are loading it straight into the product, not at an angle. If paper jams when you print on both sides of the paper, try loading fewer sheets.
Select > Paper Setting > paper source > Print Adjustments > Paper Feed Adjust.
The flag located right of the pick-up roller has a fixed position. If the flag becomes stuck or broken, it will produce a 60.02 tray lift error or a “LOAD PAPER” message.
Bend your hips and knees to squat down to your load, keep it close to your body, and straighten your legs to lift. Never lift a heavy object above shoulder level. Avoid turning or twisting your body while lifting or holding a heavy object.
This issue is caused when the pickup roller is dislodged or not installed correctly. The error message occurs due to the interference between the pickup roller and the lift plate in the paper input unit.
Select Start > Settings . Go to Devices > Printers & scanners > select a printer > Manage. Then select Set as default. If you don`t see the Set as default option, the Let Windows manage my default printer option may be selected.
The paper trays are overloaded. The paper is curled. The print side, or shiny side, of the paper is not loaded in the tray face down. The paper guides are too tight against the paper stack.
The message “[TRAY] Empty” appears when there is no paper in the indicated paper tray and thus the device cannot start printing.
This issue is caused when the pickup roller is dislodged or not installed correctly. The error message occurs due to the interference between the pickup roller and the lift plate in the paper input unit.
An E2 error occurs when the printer attempts to print a single-page or multi-page print job, and the paper length selected in the print settings does not match the length of the loaded paper.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Tray 1 (upper tray) paper feed problem
ANSWER : There is no way of adjusting the distance of lift. Could be that the pickup roller is worn enough that it will pick up a sheet that is higher, but not one that is lower down. You can look at the end of the roller that first makes contact and see if it is worn smooth.

Read Full Q/A … :

HP LaserJet 2

HP 1220C Photo Paper Feed Problems
ANSWER : This problem isn’t about the paper picker. Here is the real issue and fix:

Read Full Q/A … :

HP LaserJet 2

HP DeskJet 722C Paper Feed Problem
ANSWER : Detach the force string from the holding nothing back one and expel all paper from it.

Read Full Q/A … :

HP LaserJet 2

HP LJ 4350 – Tray 2 not lifting, no motors turn.
ANSWER : I can’t believe, pieces of paper was under the registration flap, now my 4250N is working.

Read Full Q/A … :

HP LaserJet 2

Optional 250 Sheet Feeder Tray (Q5931A – Tray 3) Constantly "Jams"
ANSWER : You don’t say if the paper moves at all. That’s key in determining the cause. If it’s not moving, then try swapping the rollers with tray 2. If it is moving out of the tray, then that would indicate there is some obstruction it is hitting on its way out of the tray. Hard to troubleshoot remotely when one doesn’t have specific details since we can’t see what is occurring.

Read Full Q/A … :

HP LaserJet 2

HP Laserjet 2200, Tray 2 Pickup Problem, Gears Clicking
ANSWER : Definitely not a solenoid problem. I’ve worked on tens of thousands of printers and never replaced a single solenoid. You probably knocked something loose when you installed the pickup roller. Maybe something to do with the gear on the end of the pickup roller shaft. You’ll need to take the gear assembly off to be able to see it.

Read Full Q/A … :

HP LaserJet 2

Paper Feed Problem on HP R80
ANSWER : In the last examination it is our origination of death which chooses our responses to all the inquiries life puts to us. The most pleasant spot to be is in somebody’s idea; the most secure spot to be is in somebody’s petitions.

Read Full Q/A … :

HP LaserJet 2

HP 2200 – blinking attention light and tray 2
ANSWER : Nice day. (QUALITY IS OUR CULTURE)

Read Full Q/A … :

HP LaserJet 2