HP LaserJet 4350
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
1: Check Printer Power, Cables, and Paper
Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.
There are a couple of reasons the printer could be doing this. 1) There is a connection issue, between the printer and the computer, or 2) There is an issue with the print spooler on the computer`s Operating System. How is the printer connected, Wireless, or USB?
If the cartridge door is not completely closed, the error message displays. Open, and then close the cartridge door of the product. Make sure that the door rests securely against the body of the product.
Check Ink or Toner Cartridges & Paper Tray
Issues in your printer`s ink or toner cartridges as well as an empty paper tray can cause your printer to delay your prints. Make sure that your cartridges are not running out of ink and the paper tray is not empty.
If your printer is positioned far away from the network device, it may print more slowly. Especially wireless printing or if connected to an old fashioned `hub`. Speed things up by moving your printer closer to the router/switch/etc., or plug it directly into your primary switching.
Printers usually print the first page first, and the last page last, so the pages end up in reverse order when you pick them up. To reverse the order: Press the menu button in the top-right corner of the window and press the Print button. In the General tab of the Print window under Copies, check Reverse.
Reasons why your HP printer has ink but won`t print
This may seem obvious, but it sometimes happens: first make sure your paper tray has paper in it. Misalignment, clogged printheads, faulty data communication or insufficient ink levels can also be sources of the problem.
Select Start > Settings . Go to Devices > Printers & scanners > select a printer > Manage. Then select Set as default. If you don`t see the Set as default option, the Let Windows manage my default printer option may be selected.
Risks of printing too slow
In general, a slower 3D printer print speed results in higher quality. Nonetheless, printing too slowly can cause issues of its own. These issues generally relate to overheating: if the filament stays in the nozzle chamber too long, it can get too hot and cause deformations on the part.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
HP LJ 4350 – Tray 2 not lifting, no motors turn.
I can’t believe, pieces of paper was under the registration flap, now my 4250N is working.
13.20 Paper Jam "Open input trays, then open and close top cover"
Usually, it’s a scrap of paper stuck where the paper comes up out of the tray and takes the bend up into the printer. With the trays out, tilt the printer backwards and look up into the slot. You can usually see the paper stuck in the slot. If not, then take the cartridge out and lift up the flap at the front and look down there.
HP LJ 1150 Printing multiple pages on one sheet?
Hp printer not printing
Check estimated ink levelsFollow these steps to check the estimated ink levels.
HP DeskJet 1220C Prints only Pink & Black
hi everyone. i have an hp ink advantage 5525 all-in-one. changed all cartridges as they were empty and when i tried to print i got blank pages. i gave a print order a couple times to find out what was going on and found out that yellow and magenta inks worked but not cyan and black. removed cartridges, clean and all many times and nothing happened. then i tried this youtu.be/f57jOGj-G5s and the print quality of magenta and yellow improved significantly but still no black or cyan at all. i can’t do the running water thing because the print head is not detachable. any suggestions?
hp deskjet 960c printing problem
RE: HP 960c printer. I have new cartridges and the test page prints out full color. When printing a color document the page prints in black & white. Why not color? The print page is on color not black & white.
I just bought an officejet 3830 2 weeks ago. Now it won't print at all! Says inkjet jam. It's not! I've done all the fixes as per hp's website now what?
Take it back and exchange it under warranty.
HP Deskjet 640c wont print??