HP LaserJet 4345
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
A 49 error typically occurs when the printer attempts to perform an action that the firmware is not capable of performing or might not be designed to handle, for example: Printing files that include unsupported printer commands. Interfacing with a third-party solution that was not designed to work with the printer.
49. FF81 errors is due to Hard Drive. Suggest you to check and verify if Hard rive is Western Digital Drive. If it is Western Digital Drive, suggest you to contact our technical support team at 1800-474-6836 and get the drive replaced.
Turn the printer off, unplug the printer from the network/computer, clear any pending jobs from the print queue (on the computer), then reboot the printer to make the 49 error disappear. Then you can reconnect the network/computer cable and try printing again.
In general, a 49 service error is a situation where the printer cannot process a file that has been sent. In some cases the file is corrupted and in other cases the printer`s firmware simply cannot interpret that file.
The Policy Server reports Error 49 when the user credentials are invalid. With Active Directory as the user store, error 49 may appear for multiple reasons. In the Policy Server log, error 49 is followed by a data code, and this data code gives the exact reason of unsuccessful authentication.
Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.
This error can be caused by having insufficient memory on the device. e.g. multiple apps are installed on the MFP at the same time. Note 💡 It is recommended for the PaperCut partner to do the steps below, as opposed to the end customer, as the MFP will need to be reconfigured with PaperCut Hive and PaperCut MF.
Error code 59.40 for HP Laserjet 4350 means that your printer has a print cartridge motor error. The actions you can do to fix this error are: 1 Turn the printer off and then on. 2 Replace the print cartridge.
The 59.40 is a “fuser rotational error“. Meaning the fuser was unable to rotate causing this error.
Make sure the printer is on and connected to your computer. Go to HP Software and Driver Downloads, and then enter your printer model. Select Firmware from the list of drivers, click Download next to the update, and then follow the instructions.
Most times the 49 error is a firmware error and not a driver error. It is usually casued by a bad print job trying to print and confusing the printer. You need to disconnect the printer from the computer and/or network and turn the power on and see if the printer comes to ready.
U means used. The meter thinks that it`s receiving a used strip. I always think of the words of the song, slow down, you move too fast. It`s very important that when you place the strip in the meter that you wait for it to show CH for checking and that the blood icon flashes like that.
Cause: Button is mechanically blocked or jammed. Moisture on the control unit.
Wipe the sensor window with one of the cotton swabs provided in the Printer Cleaning Kit, slightly dampened (not soaked) with isopropyl alcohol, to remove dried ink. If the sensor window is heavily coated with dry ink, you may need to apply some pressure while wiping, helping the cotton to absorb the ink.
Your printer display or status monitor may read “Fatal Error”. This simply means a problem has occurred requiring action to clear.
A 49.38. 0C indicates an internal firmware error has occurred. The root cause of this can vary depending on the version of firmware running on the device. Knowing what version your HP LaserJet CP5525 is running would help us in diagnosing the issue.
If it does it means there is a print job trying to print to that printer causing the error. You will need to remove the printjob, reconnect the printer, turn it on and first thing update the firmware to the latest version.
Is this a common issue? 41.02 error on this printer is a laser/scanner error. If the message does not clear, then you need to replace the laser/scanner. If you are not getting a 41.02 error, then report back with the correct number.
49 errors are typically associated with a corrupt print job or faulty ethernet port on the formatter board. you could try installing an external jetdirect card, which would take the place of the onboard ethernet port. Ok will give that a shot.
Some random crash 49.38. 13 may happen when the BarDIMM Pro is installed in the printer equipped with that firmware and other solutions. The defect is fixed in HP Futuresmart 5.2 firmware. If your HP printer does not have Futuresmart 5.2 available, we recommend you downgrade to Futuresmart 4.11.
Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.
This error can be caused by having insufficient memory on the device. e.g. multiple apps are installed on the MFP at the same time. Note 💡 It is recommended for the PaperCut partner to do the steps below, as opposed to the end customer, as the MFP will need to be reconfigured with PaperCut Hive and PaperCut MF.
This error might happen at any time for multiple reasons. The most common causes are due to the printer being asked to perform an action that the firmware is not capable of, and might not have been designed to perform, such as: Printing files with unsupported programming commands.
This error might happen at any time for multiple reasons. The most common causes are due to the printer being asked to perform an action that the firmware is not capable of, and might not have been designed to perform, such as: Printing files with unsupported programming commands.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr
Read Full Q/A … :
HP LaserJet 4345
ERROR on HP LJ 4525
ANSWER : Print a Configuration page. That will tell you what size paper Tray 2 thinks it has in it. If it doesn’t have plain letter on the page, then it will ask to print from Tray 1.
Read Full Q/A … :
HP LaserJet 4345
HP 9040 MFP Error code
ANSWER : bonsoir
Read Full Q/A … :
HP LaserJet 4345
HP 4050 Error 13.1 & 13.20
ANSWER : I tried the fix you recommended but it still would not fix.
Read Full Q/A … :
HP LaserJet 4345
Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.
Read Full Q/A … :
HP LaserJet 4345
HP Laserjet 4250 – RFU LOAD ERROR
ANSWER : Italiano:
Read Full Q/A … :
HP LaserJet 4345
HP Laserjet 4200 50.2 Fuser error
ANSWER : if you are using a good fuser the next part to try would be low voltage power supply
Read Full Q/A … :
HP LaserJet 4345
HP Color Laserjet 500 series M551n Error 98.00.0C
ANSWER : I just ran into one of these on a 4 year old m551. Failed to complete startup at the end of disk check. Followed the above link for troubleshooting.
Read Full Q/A … :
HP LaserJet 4345