HP LaserJet 4100
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
HP LaserJet 4100 Fuser RG5-5063.
Printing made easy with an HP Fuser Kit
The HP LaserJet Fuser helps make sure your HP toner is applied to your paper evenly and with vivid color and detail on every page without putting a major dent in your budget. It lets you print up to 150,000 pages of dynamic quality before you need to replace it.
Depending on your printer model, the fuser unit may be sold separately or it may be included in the printer`s maintenance kit. The fuser melts the toner particles, binding them to the page. The speed at which the paper passes through the fuser is what keeps the paper itself from burning.
The fuser assembly has two blue handles (red arrows in picture below); hold those two handles as you pull the fuser straight out and remove it from the printer. Install the new fuser in the same manner; make sure it is seated well, and then close the door. That`s it for the fuser!
The most common location to find your product information is on its label. For most HP products the product label is on its bottom, its side, its top, or its back. On some products, it might be inside a battery compartment or behind an access panel.
The fuser unit or fuser is a critical part of any laser printer. Using pressure and heat, it fuses the toner powder onto the page to create a print, and without it, the printer cannot operate.
Streaking, smudging, black lines, and double images are all symptoms of a bad fuser. When you notice these printing defects and experience problems, such as paper jams or wrinkles, this is a good sign to replace the fuser kit.
A component found in electrostatic printers, laser printers, and xerographic printers and photocopiers. The fuser unit is used to permanently bond toner to a substrate by applying heat and pressure. A fuser unit is made up of two rollers; one to apply heat and one to apply pressure.
The fuser unit or fuser assembly, is a critical component of your laser printer. Using pressure and heat, it fuses the toner powder onto the page to create a print, and without out it, your printer cannot operate.
The fuser unit must be replaced every 100,000 pages, usually along with the transfer belt and feed rollers as part of a maintenance kit. The error code 010-351 indicates that the fuser has reached 75,000 pages and as a result has 25% life or less remaining.
Look inside the fuser opening to make sure there is no debris or jammed paper. Remove any debris or jammed paper, if found. Hold the handles on each side of the fuser and reinstall it in the printer.
The serial number is located on the UPC sticker inside the ink cartridge door. To view the UPC sticker, open the ink cartridge door on the front of the printer.
New RM1-8808-000CN Fuser Assembly for HP Pro400 M401 M425 M401DN M401D M425N 400 401 425 401D 425N Fuser Unit.
HP – 61XL High-Yield Ink Cartridge – Black.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
HP Laserjet 4100 Error (13.1)
ANSWER : I am pretty late to the party for this discussion but I am incredibly thankful to the person that posted this “fix” that I can barely imagine it. My 4100 had developed the dreaded paper jam described above and I had no idea what was causing it. I replaced a number of rollers only to have the same problem re-occur with no solution in sight.
Read Full Q/A … :
HP LaserJet 4100
Good toner cartridges still available for HP LJ 4V?
ANSWER : Try directpreciseimaging.Com in Calif. Don’t worry about resistance unless there is none.
Read Full Q/A … :
HP LaserJet 4100
HP Laserjet 4200 50.2 Fuser error
ANSWER : if you are using a good fuser the next part to try would be low voltage power supply
Read Full Q/A … :
HP LaserJet 4100
HP LJ 4350 – Tray 2 not lifting, no motors turn.
ANSWER : I can’t believe, pieces of paper was under the registration flap, now my 4250N is working.
Read Full Q/A … :
HP LaserJet 4100
HP 4250 13.06.00 Fuser output paper stop !
ANSWER : pick up solenoid
Read Full Q/A … :
HP LaserJet 4100
Formatter board repair (HP 2200, 4100, 4600 etc.)
ANSWER : Yes i have two printers one is hp laser jet p2055dn when i print test page,it print blank page and create jam inn cartridge area and another one is hp laserjet enterperise M606,When i try to print tests page,it does not print but give me error code 50:00:00 on the contral panel,who can help me with these printers problem Thanks
Read Full Q/A … :
HP LaserJet 4100
HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr
Read Full Q/A … :
HP LaserJet 4100
HP LJ P3015
ANSWER : well ^%$#(&^%[[[[
Read Full Q/A … :
HP LaserJet 4100