HP Color LaserJet 2500N
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
When 51.00. xx Error To continue turn off then on is displayed on the control panel, it indicates that there is a laser/scanner assembly issue. The XX is a two digit code that provides information on the specific issue causing the error. Turn the printer off, and then back on to clear the error.
Any of these error codes (51.10 51.11 51.12 51.13, 51.20, 51.21, 51.22, 51.23) points to a failure with one of the laser scanner assemblies on the HP Color LaserJet 5500 and 5550 series. To solve these error codes, replace the corresponding laser scanner.
This 51.10 error code points to a failure with the laser scanner assembly, and to fix this error usually you end up replacing the laser scanner assembly. You can try turning the printer off and back on, which may temporarily reset the error and let you print a few more pages.
The 51.01 and 51.1 errors are fairly common error codes on the HP LaserJet 4100, 4100N, 4100TN, and 4100DTN series printers. This error indicates a failure with the laser scanner assembly, which is a high-failure part on these models.
Valorant Error Code 51: Disable Your Antivirus
If you are running an anti-virus program, temporarily disable it before launching Valorant and you should be able to login into the game without getting the error.
That error code indicates a failure of the yellow laser scanner. Unplug and leave for a few minutes, also make sure you are plugged directly into the wall and not into a surge protector.
Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.
The error code 0x00000505 in Printer Properties usually occurs because of a corrupt printer driver. As a result of the error, the user cannot change some of the printer properties or cannot open the printer properties at all.
a misprint or misspelling in a text.
(Note: Sam`s laser diode notes — Diode Laser chapter of Sam`s Laser FAQ.) (From: Tom Dunn ([email protected]).) Error code 51 indicates loss of laser beam for over 2 seconds. Check -5 V, also make sure there is no interlock mechanism damage, and +5 V at J451-1 on Laser Drive PCA.
21-51 errors can occur for a number of reasons, but it`s normally after making a programming change or attempting to record a show. We want to get you back to watching as quickly as possible, so try the steps listed below to resolve this error. Update the Sling TV app on your device.
You should be able to just go through your anti-virus settings and whitelist both “recroom.exe” and “recroom_release.exe”. You can find these in the Rec Room installation folder. This way it won`t interfere with Rec Room and still be active in the background.
In computing, an error code (or a return code) is a numeric or alphanumeric code that indicates the nature of an error and, when possible, why it occurred.
The laser/scanner assembly needs to be replaced as one of the motors has gone bad inside the assembly.
Any of these error codes (51.20 51.21 51.22 51.23) points to a failure with one of the laser scanner assemblies on the HP Color LaserJet 4610 an 4650 series. To solve these error codes, replace the corresponding laser scanner.
To fix the error code 0x0000011b related to networked or shared printers, Microsoft says you should disable the print spooler privacy settings on both the Client PC (from which you work) and Print Server (Workstation to which the printer is attached).
Error 0x0000011b usually occurs when trying to print something using a network-shared printer. According to user reports, error 0x0000011b started occurring on Windows 10 after installing security updates KB5005568, KB5005566, and KB5005565, which are aimed at protecting from Windows Print Spooler Spoofing.
The 0x0000011B issue is often resolved by restarting the print spooler service. To do so search for services and open the services in Windows. Now search for the print spooler in the services list. Right click on it click restart.
A new page should print with a claim code. If the page does not print, see the email address on the printer display. The first part of the HP ePrint address preceding “@hpeprint.com” is the claim code. For example, if your HP ePrint email is “abc@hpeprint.com”, then “abc” is your claim code.
1. Paper Jams. Paper jams are a common problem for printers, resulting in time-consuming and frustrating delays. It can occur when loose sheets of paper get stuck in the rollers or feeding mechanism of the printer.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
The Windows error code 0xc0000005 is a particularly debilitating error that can break your workflow unless properly fixed. Although the precise cause of this error can vary wildly, it`s generally caused by a problem in your memory or a general failure to process the app`s settings by your operating system.
This error is due to the scanner driver not being installed properly.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr
Read Full Q/A … :
HP Color LaserJet 2500N
ERROR on HP LJ 4525
ANSWER : Print a Configuration page. That will tell you what size paper Tray 2 thinks it has in it. If it doesn’t have plain letter on the page, then it will ask to print from Tray 1.
Read Full Q/A … :
HP Color LaserJet 2500N
HP 9040 MFP Error code
ANSWER : bonsoir
Read Full Q/A … :
HP Color LaserJet 2500N
HP 4050 Error 13.1 & 13.20
ANSWER : I tried the fix you recommended but it still would not fix.
Read Full Q/A … :
HP Color LaserJet 2500N
Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.
Read Full Q/A … :
HP Color LaserJet 2500N
HP Laserjet 4250 – RFU LOAD ERROR
ANSWER : Italiano:
Read Full Q/A … :
HP Color LaserJet 2500N
HP Laserjet 4200 50.2 Fuser error
ANSWER : if you are using a good fuser the next part to try would be low voltage power supply
Read Full Q/A … :
HP Color LaserJet 2500N
HP Color Laserjet 500 series M551n Error 98.00.0C
ANSWER : I just ran into one of these on a 4 year old m551. Failed to complete startup at the end of disk check. Followed the above link for troubleshooting.
Read Full Q/A … :
HP Color LaserJet 2500N