HP Color LaserJet 2500
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
C0 error indicates Developer motor rotation error. This is a hardware failure.
59. C0 = Developer motor rotation error. With this printer it usually means the product needs to be replaced. What you can try is to remove all toners and then start up the printer and see if the error appears.
F0 Error and is unable to print. This error is primarily caused by one of the following conditions: A transfer alienation failure in which the ITB is stuck and unable to properly engage the internal transfer rollers. The SR9 sensor (the primary transfer roller disengagement sensor) has gone bad.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
59.70 is a black developer motor failure. If unit is still under warranty contact tech support and get it repaired. If unit is out of warranty you will need a developer motor RM2–7344–000CN.
The 55.1 error relates to a memory error on the dc controller. Make sure the printer is plugged directly into the wall socket and not a surge protector. If the error is still there, then you need to contact hp customer care in your location to get warranty service since it would appear parts will need to be replaced.
A 59.00. B0 Cleaning motor error is displayed on the control panel when there is a problem with the cleaning motor. The motor might be stalled due to the toner collection unit (TCU) being full, the waste toner chute is clogged, or the cleaning motor is stalled.
Val 59 error occurs due to an issue with the Riot Client. The game`s developers introduce a new patch once every two weeks, along with additional updates and bug fixes whenever required. These changes enter the game with the help of the Riot Client. `There was an error connecting to the platform.
The message `Fuser Error` or `Self-Diagnostic` means either the fuser has reached the maximum temperature allowed or there has been an error in detection of the correct temperature during specific times of the printing process.
To fix the error code 0x0000011b related to networked or shared printers, Microsoft says you should disable the print spooler privacy settings on both the Client PC (from which you work) and Print Server (Workstation to which the printer is attached).
The 0x0000011B issue is often resolved by restarting the print spooler service. To do so search for services and open the services in Windows. Now search for the print spooler in the services list. Right click on it click restart.
Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.
There is a communication failure with the imaging drum. Turn the printer off and then on. If the error persists, replace the imaging drum. If the error still persists, contact HP. 10.000X Supply memory error or 10.100X Supply memory error.
Possible causes for this error include: Swing arms are not engaged. Lift motor or clutch failure. Dirty or defective encoder disk/sensor.
63.00. 41 There is an error in the toner supplied to the black developer. HP LaserJet Black Developer Unit: 8JM70-67001 (E783xx series) or JC96-11666A (E778xx series}. If the firmware bundle installed on the printer is lower than 4.6.
Possible causes for this error include: Swing arms are not engaged. Lift motor or clutch failure. Dirty or defective encoder disk/sensor.
For anyone else who finds this page when tracking down this error, Error 79.8109 is simply the result of using the wrong printer driver (i.e. the HP Universal PCL6 driver, as provided under Windows 8 and 10). This driver does not work correctly with this printer. In general this error isn`t a formatter problem.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr
Read Full Q/A … :
HP Color LaserJet 2500
HP Laserjet 4250 – RFU LOAD ERROR
ANSWER : Italiano:
Read Full Q/A … :
HP Color LaserJet 2500
HP 9040 MFP Error code
ANSWER : bonsoir
Read Full Q/A … :
HP Color LaserJet 2500
HP Laserjet 4200 50.2 Fuser error
ANSWER : if you are using a good fuser the next part to try would be low voltage power supply
Read Full Q/A … :
HP Color LaserJet 2500
HP 4050 Error 13.1 & 13.20
ANSWER : I tried the fix you recommended but it still would not fix.
Read Full Q/A … :
HP Color LaserJet 2500
Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.
Read Full Q/A … :
HP Color LaserJet 2500
HP 4550N formatter board
ANSWER : You can replace it by finding the slot of DIMM, where the existing HP4550N formatter board is installed. More info is available here
Read Full Q/A … :
HP Color LaserJet 2500
ERROR on HP LJ 4525
ANSWER : Print a Configuration page. That will tell you what size paper Tray 2 thinks it has in it. If it doesn’t have plain letter on the page, then it will ask to print from Tray 1.
Read Full Q/A … :
HP Color LaserJet 2500