HP CopyJet M

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Reset the printer
  1. If your printer has a rechargeable battery, remove it.
  2. With the printer turned on, disconnect the power cord from the printer.
  3. Unplug the power cord from the power source.
  4. Wait 60 seconds.
  5. Reconnect the power cord to a wall outlet and to the printer. Note: …
  6. Turn on the printer to complete the reset.
Open the printer`s web page and Sign in as Administrator. On the General tab select Reset Factory Settings in the menu.
A new page should print with a claim code. If the page does not print, see the email address on the printer display. The first part of the HP ePrint address preceding “@hpeprint.com” is the claim code. For example, if your HP ePrint email is “[email protected]”, then “abc” is your claim code.
The easiest way to find your printer model is by looking at the front of your printer. Depending on what printer you own, the model name could be on the corners or the center of the front-facing cover. If it is on the front of the machine, it is usually close to the control panel.
The most common location to find your product information is on its label. For most HP products the product label is on its bottom, its side, its top, or its back. On some products, it might be inside a battery compartment or behind an access panel.
E0 error. An E0 error indicates an unusable cartridge. This occurs when one or both ink cartridges need attention. Reseat both cartridges, clean the ink cartridge contacts, restart the printer, and replace one or both ink cartridges if necessary.
E0 can be caused by an incoming power issues, such as a low voltage condition or excessive power consumption. On occasion this can be resolved by unplugging the unit for 10 minutes.
This error code can appear for a few reason such as cable issues, firmware errors or hardware faults. You can try the reset processes as stated at the top of the page, then if the error code still displays update the firmware, also try using different printer cables.
1. Paper Jams. Paper jams are a common problem for printers, resulting in time-consuming and frustrating delays. It can occur when loose sheets of paper get stuck in the rollers or feeding mechanism of the printer.
a misprint or misspelling in a text.
If your printer is turned on, disconnect the power cord from the printer. Keep the power plug unplugged for 60 seconds, reconnect the power cord to the wall, and turn on the printer. If the error persists, remove the cartridge from the printer, clean the cartridge contacts with a cloth, and reinstall the cartridges.
The OpenGL error code 3 message suggests an issue with your PC`s graphics (GPU) driver. Reinstalling the NVIDIA display driver could fix such an issue. We recommend that you cleanly reinstall your graphics card`s driver as covered in our guide to cleanly reinstalling GPU drivers on Windows.
Error Code 3 is a Windows error code that appears when the computer cannot find the specified path.
C# enum PrinterStatus { Other = 1, Unknown, Idle, Printing, Warmup, Stopped Printing, Offline } So the result that you are getting (3) means it is Idling.
An Er/03 error message indicates the printer failed to pick a sheet of paper to print. Remove the stack of paper from the tray and check the condition of the paper. Reload the paper, and then try to print, copy or scan. For detailed troubleshooting, go to Printer Does Not Pick Paper.
C# enum PrinterStatus { Other = 1, Unknown, Idle, Printing, Warmup, Stopped Printing, Offline } So the result that you are getting (3) means it is Idling.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

evenly spaced horizontal lines on hp laserjet III printout
ANSWER : The lines would be a toner cartridge problem. Which paper tray? The MF tray or the optional paper cassette?

Read Full Q/A … :

HP CopyJet M

HP LaserJet 2200D won't print configuration page
ANSWER : Find someone with a HP LaserJet 4100 and you can configure the card to the IP you want:

Read Full Q/A … :

HP CopyJet M

HP Laserjet 4250 – RFU LOAD ERROR
ANSWER : Italiano:

Read Full Q/A … :

HP CopyJet M

HP Laserjet M3035xs RFU Upgrade
ANSWER : There’s no way.

Read Full Q/A … :

HP CopyJet M

HP Laserjet 4200 50.2 Fuser error
ANSWER : if you are using a good fuser the next part to try would be low voltage power supply

Read Full Q/A … :

HP CopyJet M

How to copy a card slot in HP laserjet 4250N
ANSWER : None that I know of, using a computer is likely your best option but I never attempted it.

Read Full Q/A … :

HP CopyJet M

HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr

Read Full Q/A … :

HP CopyJet M

HP Colour laserjet 2550n printer Tray2 issues
ANSWER : Ensure that the printer is turned on and in the Ready state.

Read Full Q/A … :

HP CopyJet M