HP Business Inkjet 3000
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Application and print driver have conflicting tray selections. Check the tray selected in the print driver. Access the page setup or printer settings of the application from which you are printing. Set the paper source to match the tray selected in the print driver or set the paper source to Automatically Select.
Right-click your product, and then select Printing Preferences. From the Printing Preferences menu, select Paper/Quality. From the Paper Source drop-down menu, select Tray 2.
From the Home screen on the printer control panel, touch the Setup icon (or ). Open the System Setup menu, and then open the Paper Setup menu. Select the tray that you want to configure. Select Paper Type, and then select the desired paper type for the tray.
Paper Overloading
Because many desktop inkjet printers are top-loading, it can be easy to overload the tray.
The most common cause of this issue is paper misalignment. Make sure you properly insert the papers in the tray and avoid overfilling the tray. If this doesn`t solve the problem, check the troubleshooting section of the printer`s user manual.
To specify a tray within MS Word the user must: Click File and then Print. In the Print Dialogue click Page Setup. In the Page Setup window click on the Paper tab.
Generally when the printer tells you to print to tray 1 it means the job being sent to the printer is asking for a paper size and/or type that the printer does not think it has in any tray. Check you paper size and type settings for trays 2 and 3 and then check what each job is asking.
Open the Printers and Faxes window, right click on the printer, and choose “Properties.” There should be a “Printing Preferences” option there. Anything you set there becomes the default for all future printing.
Open Tray 1. Pull out the tray extension to support the paper. Use the adjustment latch to spread the paper guides outward. Load paper in the tray.
Step one: Configure the tray settings
Click the Copy/Print or Print tab. Open the Manage Trays menu. Modify the tray settings.
Select Start > Settings . Go to Devices > Printers & scanners > select a printer > Manage. Then select Set as default. If you don`t see the Set as default option, the Let Windows manage my default printer option may be selected.
A paper feed issue can occur for several reasons, such as dusty or contaminated paper rollers, the condition of the paper in the tray, or even issues with the software. To resolve the issue, try each solution in this document, and then use the steps in this section to print a self-test report.
Select Start > Settings . Go to Devices > Printers & scanners > select a printer > Manage. Then select Set as default. If you don`t see the Set as default option, the Let Windows manage my default printer option may be selected.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Laserjet 9000 57.5 cycle power
ANSWER : according to the manual, the solution should be replacing part RH7-5296-000CN (or use alternate part RH7-1658) for 9000 / 9040 / 9050….have you tried it? …..if you’ve got any questions, contact me, Audrey, case study writer in tech and stuff
Read Full Q/A … :
HP Business Inkjet 3000
HP LaserJet 2200D won't print configuration page
ANSWER : Find someone with a HP LaserJet 4100 and you can configure the card to the IP you want:
Read Full Q/A … :
HP Business Inkjet 3000
HP Laserjet 1320tn printing grey instead of black
ANSWER : Try this test. Put a page into the manual feeder and do that same test. When the end of the page is just about to enter the printer, open the lid. Take out the toner cartridge and pull back the shutter. Look at the image and see if it is black. The explanation is that there is high voltage going to both the toner cartridge and the charge transfer roller below it. If the image on the drum is black, then the fault is at the transfer roller not getting enough high voltage. The transfer roller pulls the image off of the drum and down onto the paper. It would not be a laser scanner problem as any issue with it would not result in an overall gray image, but combination of gray and black. It will probably turn out to be a bad HV power supply, which will need replacement. I’ve never seen this particular problem on this model.
Read Full Q/A … :
HP Business Inkjet 3000
HP Laserjet 2200, Tray 2 Pickup Problem, Gears Clicking
ANSWER : Definitely not a solenoid problem. I’ve worked on tens of thousands of printers and never replaced a single solenoid. You probably knocked something loose when you installed the pickup roller. Maybe something to do with the gear on the end of the pickup roller shaft. You’ll need to take the gear assembly off to be able to see it.
Read Full Q/A … :
HP Business Inkjet 3000
HP Color Laserjet 3800 problem when printing color
ANSWER : Do a cold reset
Read Full Q/A … :
HP Business Inkjet 3000
HP ScanJet 9000 service manual required
ANSWER : Scanner write some numbers, How i can know that number’s mean?
Read Full Q/A … :
HP Business Inkjet 3000
evenly spaced horizontal lines on hp laserjet III printout
ANSWER : The lines would be a toner cartridge problem. Which paper tray? The MF tray or the optional paper cassette?
Read Full Q/A … :
HP Business Inkjet 3000
How to copy a card slot in HP laserjet 4250N
ANSWER : None that I know of, using a computer is likely your best option but I never attempted it.
Read Full Q/A … :
HP Business Inkjet 3000