HP LaserJet 5000N

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

For most black and white printers 32MB and 64MB of RAM is recommended. For most color laser printers, 128 MB of RAM is recommended.
A supply memory error happens when the metal contacts / chip on an HP toner cartridge doesn`t correctly connect with the corresponding contacts inside the printer. The printer cannot detect the toner cartridge and displays the `Supply Memory Error` message on the printer display panel.
The amount of memory that a printer has is typically sufficient for standard operations, like producing normal documents and photos. Printer memory can range from 4MB up to 128MB, which allows for more complicated tasks that require additional data processing.
Turn off print spooling. This is the most common cause of the printer running out of memory. Change the print mode to “raster” or “bitmap” to reduce the printer memory requirements. Change the printer driver to use the computer`s memory instead of the printer`s memory.
If you have noticed that your printer struggles to process large documents or multiple documents at once, then you can certainly benefit from a memory upgrade.
To stop high RAM usage, start small by quitting programs you aren`t using, restarting your computer, uninstalling unneeded programs, and scanning for any malware that may be on your device. If this doesn`t work, consider downloading a RAM cleaning software or even installing more RAM.
To improve system performance, you can upgrade the random-access memory (RAM) in your computer. Before you purchase additional memory, make sure that you know the type of memory used by your computer, the maximum amount of memory for your computer, and the memory slot configuration.
Allow the computer to remain unplugged for a minimum of five minutes, ensuring that the device has sufficient time to power down completely. Allowing the device to discharge its power will also clear its memory.
Causes of RAM failure are various such as soft errors (heat, magnetic interference, electrostatic discharge, power surges, etc.), hard errors, flawed RAM modules, etc. And RAM issues sometimes happen unexpectedly.
Allow the computer to remain unplugged for a minimum of five minutes, ensuring that the device has sufficient time to power down completely. Allowing the device to discharge its power will also clear its memory.
Just take out your toner cartridge. If you find an orange color notch on the left side, just remove it. Re-insert the cartridge and restart the printer. This should resolve your issue.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP Laserjet 2200, Tray 2 Pickup Problem, Gears Clicking
ANSWER : Definitely not a solenoid problem. I’ve worked on tens of thousands of printers and never replaced a single solenoid. You probably knocked something loose when you installed the pickup roller. Maybe something to do with the gear on the end of the pickup roller shaft. You’ll need to take the gear assembly off to be able to see it.

Read Full Q/A … :

HP LaserJet 5000N

HP Color Laserjet 3800 problem when printing color
ANSWER : Do a cold reset

Read Full Q/A … :

HP LaserJet 5000N

evenly spaced horizontal lines on hp laserjet III printout
ANSWER : The lines would be a toner cartridge problem. Which paper tray? The MF tray or the optional paper cassette?

Read Full Q/A … :

HP LaserJet 5000N

HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr

Read Full Q/A … :

HP LaserJet 5000N

HP Laserjet M3035xs RFU Upgrade
ANSWER : There’s no way.

Read Full Q/A … :

HP LaserJet 5000N

How to copy a card slot in HP laserjet 4250N
ANSWER : None that I know of, using a computer is likely your best option but I never attempted it.

Read Full Q/A … :

HP LaserJet 5000N

HP Laserjet 4200 50.2 Fuser error
ANSWER : if you are using a good fuser the next part to try would be low voltage power supply

Read Full Q/A … :

HP LaserJet 5000N

HP LaserJet 1160 pick-up problem
ANSWER : Take the black rubber roller out. Clean it and turn it 90-180 degrees so there is fresh rubber in the “corner”.

Read Full Q/A … :

HP LaserJet 5000N