HP DeskJet 500

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If you are seeing the 41.3 error on a LaserJet 4, 4Plus, or 5 series printer, and you find a blank sheet of paper in the path, your printer is probably having a failure with the solenoid on the paper feed assembly. This is becoming a common issue as these printers get older.
This is tipically caused if two or more sheets stick together in the product or if the tray is not properly adjusted“.
just GOTO settings > printer properties of your printer > preferences>paper quality >change the paper to A4 size . and restart the printer.
This error has nothing to do with the laser/scanner—it means “unexpected paper size.” The printer measures paper size two ways: The paper cassette has a set of ridges and/or levers usually found on the right side.
The reasons as to why “Printer not activated, error code 41” comes up on the system, includes problem with the printer software or printer drivers, incorrect configuration of printer settings, errors within the operating system installed on the system connected to the printer and more.
In some cases the reason for error code 41.7 is that the rollers grabbing fresh paper are not sticky enough any more. In this case I used spray for climbing skins (e.g. colltex) to make them stickier again, and the problem was resolved.
The 41.2 error in the LaserJet 5Si, 8000, 8100 and 8150 is typically caused by high voltage arcing that disrupts the beam detect circuit. The most common cause of arcing is a bad connection to the transfer roller.
The extra time needed to pick the sheet of paper incorrectly leads the product to `believe` that the piece of paper pulled from Tray 2 is actually longer than it is. Depending on how much extra time was needed to feed the sheet, the product may jam and/or display the Unexpected Size error.
Click Start, point to Settings, and the click Printers. Right-click the appropriate printer, and then click Properties. Click the Paper tab, and then click the paper size you want to use in the Paper Size box. Click OK, and then close the Printers folder.
This event indicates that some unexpected activity prevented Windows from shutting down correctly. Such a shutdown might be caused by an interruption in the power supply or by a Stop error. If feasible, Windows records any error codes as it shuts down.
Error code 41 is one of several Device Manager error codes. It`s caused either by a hardware device that`s been removed after the driver was loaded or by an issue with the device driver itself.
Here`s a bit more detail for anyone who sees an Error 41 message from the Form 2: Error 41 indicates an error reading the galvanometers, based on the printer`s hardware and firmware version. To resolve an Error Code 41 message, update the Form 2`s firmware. Install the lastest version of PreForm.
The BIOS Recovery (500) message displays for 15 seconds before the computer automatically reboots. You have the option of pressing enter to proceed without waiting 15 seconds. To resolve the BIOS Recovery Error (500), update the computer BIOS to the latest version.
63.00. 41 There is an error in the toner supplied to the black developer. HP LaserJet Black Developer Unit: 8JM70-67001 (E783xx series) or JC96-11666A (E778xx series}. If the firmware bundle installed on the printer is lower than 4.6.
On the control panel, open the Setup, Service, or Settings menu. Select Preferences, Printer Maintenance, or Tools. Select Web Services, Printer Update, or LaserJet Update. If prompted, follow the instructions to turn on Web Services.
Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.
The laser/scanner assembly needs to be replaced as one of the motors has gone bad inside the assembly.
There is a generic 41.02 code listed in the service manual that refers to the laser write assembly. A beam detected misprint error. Turn the product off, and then on. If the error persists, replace the laser/scanner assembly.
a misprint or misspelling in a text.
In the Print window, click Preferences, Properties, or Printer Properties. Click the Paper/Quality tab, and then click Custom. Click New, type a name for the custom paper size, select the width and height, and then click OK to save the paper.
1. Paper Jams. Paper jams are a common problem for printers, resulting in time-consuming and frustrating delays. It can occur when loose sheets of paper get stuck in the rollers or feeding mechanism of the printer.
If you get this error on the printer display, it means you are trying to print something that is formatted to a size other than standard letter paper (8 ½ x 11”).
The most popular formats of the traditional sizes are the Letter (8.5 × 11 inches), Legal (8.5 × 14 inches) and Tabloid (11 × 17 inches) formats.
✔️On the Windows taskbar, click the Windows icon (), and then click Devices and Printers. ✔️Right-click your product, and then select Printing Preferences. ✔️From the Printing Preferences menu, select Paper/Quality. ✔️From the Paper Source drop-down menu, select Tray 2.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP Laserjet M3035xs error 13.17.00
ANSWER : If the misstep thinks of no interface join connected with the unit, pay for my research paper then most times the issue is the hard circle and it ought to be supplanted.

Read Full Q/A … :

HP DeskJet 500

HP Laserjet P3005 Hangs (with error 49.4C02)
ANSWER : Just change the data cable of printer. It will be solved.

Read Full Q/A … :

HP DeskJet 500

HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr

Read Full Q/A … :

HP DeskJet 500

HP Laserjet 4250 – RFU LOAD ERROR
ANSWER : Italiano:

Read Full Q/A … :

HP DeskJet 500

HP LaserJet 49 Error Troubleshooting
ANSWER : One must give a chance to 25dollarsupport its a Fix $ price Computer Tech support company, which is the best option in present crowded market. Quite dependable and cost effective..

Read Full Q/A … :

HP DeskJet 500

HP Laserjet 4100 Error (13.1)
ANSWER : I am pretty late to the party for this discussion but I am incredibly thankful to the person that posted this “fix” that I can barely imagine it. My 4100 had developed the dreaded paper jam described above and I had no idea what was causing it. I replaced a number of rollers only to have the same problem re-occur with no solution in sight.

Read Full Q/A … :

HP DeskJet 500

HP Laserjet 4200 50.2 Fuser error
ANSWER : if you are using a good fuser the next part to try would be low voltage power supply

Read Full Q/A … :

HP DeskJet 500

hp laserjet 4250n service error 49.4c02
ANSWER : The response by DMZCompute worked perfectly. Thank You!

Read Full Q/A … :

HP DeskJet 500