HP LaserJet 4L

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

In the Job Settings tree, select Advanced settings, Paper, Layout/Margins. Then use the Select margins drop-down menu to set the margins. Select from: Default, Small, Normal and Extended.
Your copies may be cut off if the paper is loaded incorrectly in the Automatic Document Feeder (ADF) or paper tray, or if the paper size setting is not programmed correctly.
This looks like the paper is not aligned in the tray. Try to move the paper to the side it`s not printing and try again. Hope this will help.
Normally the top margin is “1/8” inch. LaserJet products do not have different margins during duplex printing.
Partial prints are a common issue with printers and there are several main reasons it can occur: Problem with the print spooler (on Windows PCs) Overload of the GPU on later model Macs. Dodgy USB cord.
A printer printing lines on the page are normally caused by a blocked, dirty, or damaged print head. Blocked ink cartridge nozzles, or not removing protective seals correctly when you installed a new ink cartridge can also cause missing lines of print.
Your printer can become misaligned if there is any paper stuck in the machine, print cartridges are clogged or dirty, improper installation of cartridges and using low quality cartridges. Additionally, a printer can become misaligned after the machine completes a large print job.
The streaks or lines might be caused due to low ink levels in one or both ink cartridges. Check the ink levels using the HP Toolbox to determine if the ink cartridges are low on ink and need to be replaced. note: Ink level warnings and indicators provide estimates for planning purposes only.
To check what your printer margins should be for the printer you are assigned go to printer setup, click test print and a margin ruler will print out. The test print page will show you a ruler guide. On each side follow the diagonal line, where the line runs off the page is what the margin is for that side.
A Margin is a white or blank space between the main content and the top, bottom, and edges of the page. During the printing process adding a margin keeps important elements from being cutoff during bulk trimming or looking uneven. In terms of design, margins help create focus and give the eye a break.
On the worksheet, select the cells that you want to define as the print area. Tip: To set multiple print areas, hold down the Ctrl key and click the areas you want to print. Each print area prints on its own page. On the Page Layout tab, in the Page Setup group, click Print Area, and then click Set Print Area.
A page margin is defined as the area between the main content and the edges of the page. It is used for defining the beginning and ending of the text lines.
Start by choosing “File” and then “Print,” and clicking the “Position and Size” settings. Usually, the default option is “Scale to Fit Media,” which prints to the page margins. Deselect it, then manually enter scale, height and width values that equal the full size of your paper. Click “Print” to print your image.
Print a sheet to fit the page width

On the Page Layout tab, select Page Setup. On the Page tab, select the Fit To check box. In the Page wide by box, enter 1 (for one-page wide).

When your printer leaves black lines, the lines indicate that there are excess toner powders on the rollers or transfer belt within the printer. As the paper is moved along by the rollers and transfer belt, any excess powder left on them can result in lines being left on the paper.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
1. From your document, choose print. When the print dialog box pops up, click “properties.” 2. Under “2 Sided Printing,” change it to “1 Sided Print.”
A printer`s heads, nozzles, and other components can become dirty or clogged, which could show up as white lines running across your page. Your printer may have a head-cleaning feature available through your device software located on your computer or from the control panel on the printer itself.
Every printer is different, but general safe margins for each size are: 8.5 x 11: 0.25in on the top, left, and right, and possibly more on the bottom, like 0.5in. A4: 5mm on all sides, or 10mm to be extra safe. The bottom margin may also be bigger on this size.
Safety margins are 1/8″ margins inside the cut line of a design. The safety margin area is between the orange and red dotted lines. The safety margin area is the space in the main print area that runs the risk of being cut due to the error tolerance of the print shift.
Even after reducing the print margin to zero in the printer settings, most printers cannot print completely borderless. There are only few printer models that can actually implement this function. Most of these models are inkjet and multifunction devices.
When the aspect ratio of the image does not match the paper size and [Borderless] is selected, part of the image will be cut off when printed. Confirm that the paper size matches the image aspect ratio before printing.
1) Enhances Aesthetics – margins help center the content on the page and make it more visually appealing. They also help separate and balance the content of facing pages. 2) Improves Readability – the blank margins provide contrast to the printed words and images on the page.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP Color Laserjet 3800 problem when printing color
ANSWER : Do a cold reset

Read Full Q/A … :

HP LaserJet 4L

HP LaserJet 2200D won't print configuration page
ANSWER : Find someone with a HP LaserJet 4100 and you can configure the card to the IP you want:

Read Full Q/A … :

HP LaserJet 4L

HP Laserjet 1320tn printing grey instead of black
ANSWER : Try this test. Put a page into the manual feeder and do that same test. When the end of the page is just about to enter the printer, open the lid. Take out the toner cartridge and pull back the shutter. Look at the image and see if it is black. The explanation is that there is high voltage going to both the toner cartridge and the charge transfer roller below it. If the image on the drum is black, then the fault is at the transfer roller not getting enough high voltage. The transfer roller pulls the image off of the drum and down onto the paper. It would not be a laser scanner problem as any issue with it would not result in an overall gray image, but combination of gray and black. It will probably turn out to be a bad HV power supply, which will need replacement. I’ve never seen this particular problem on this model.

Read Full Q/A … :

HP LaserJet 4L

Dead HP 4L
ANSWER : My old HP 4L didn’t power up after I had to shut it down for a couple of weeks. Not lights, no fan … my nice old clunky Laserjet dead?

Read Full Q/A … :

HP LaserJet 4L

HP 4L Printer Paper Jam
ANSWER : The paper jam pointer flashes after the printer sustained the second sheet of paper a couple of centimeters into the machine. The main page in the wake of driving on the printer after some time dependably gets printed, yet it gets stuck at all after pages.

Read Full Q/A … :

HP LaserJet 4L

What repair needs to be done for a "50 needs repair" message on an HP Laserjet IIIP?
ANSWER : I don’t know what you mean by good toner cartridges. They haven’t been built in about 10 years, so if they are new OEMs in the box, they are guaranteed to fail. The 50 error on that printer is mostly a burned out fuser lamp. This site was sold, so as you can see, there are no more kits available.

Read Full Q/A … :

HP LaserJet 4L

How to copy a card slot in HP laserjet 4250N
ANSWER : None that I know of, using a computer is likely your best option but I never attempted it.

Read Full Q/A … :

HP LaserJet 4L

evenly spaced horizontal lines on hp laserjet III printout
ANSWER : The lines would be a toner cartridge problem. Which paper tray? The MF tray or the optional paper cassette?

Read Full Q/A … :

HP LaserJet 4L