HP LaserJet 4250

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

50.2 error indicates that the printer is not heating up fast enough. This can be caused by a bad heating element in the fuser but can also be caused when the printer does not have adequate power due to overloaded circuits or being plugged into a power strip or surge bar that limits current flow.
The fuser unit or fuser is a critical part of any laser printer. Using pressure and heat, it fuses the toner powder onto the page to create a print, and without it, the printer cannot operate. Fuser units eventually need to be replaced after frequent use.
In this case, it is recommended that you replace the fuser unit with a new one. The life of the fuser unit when printing A4 size paper is approximately 50,000 pages.
Printing made easy with an HP Fuser Kit

It lets you print up to 150,000 pages of dynamic quality before you need to replace it.

If you see this error code 50.5 on an HP LaserJet 4200, 4240, 4250, 4300, or 4350 series printer, the fuser installed in the printer is registering as an incorrect fuser for that model printer.
If you are experiencing an “50.2F. 00 Fuser error”, first turn the printer off and back on. Sometimes the error will temporarily go away with a reboot so you can print a few more pages, but usually the error reappears.
A good rule of thumb: if your printer is more than seven years old, you may want to start pricing new units. In this case, even a relatively inexpensive component is not worth the investment.
Save time, money, and paper when you use HP`s two-sided printing accessory. The accessory prints both sides of the page automatically, so you can concentrate on more important work. You`ll see budget savings because paper consumption is cut in half.
What`s the average lifespan of a printer? The average lifespan of a printer is around 3-5 years. With proper upkeep and maintenance, some printers can last longer, but eventually your machine will need an upgrade.
Streaking, smudging, black lines, and double images are all symptoms of a bad fuser. When you notice these printing defects and experience problems, such as paper jams or wrinkles, this is a good sign to replace the fuser kit.
The message “Fuser Kit Low” or “Fuser Kit Very Low” on your HP Color LaserJet M553 series printer is a warning that you have reached the recommended number of prints for your fuser assembly. (The fuser assembly is the consumable part in your printer which heats up and bonds toner to the paper.
Push up on the release buttons on both sides of the fuser to release the springs, and then pull the fuser out of the printer. Place the old fuser aside for recycling. Remove the new fuser from its box. Remove the protective packaging.
The message “Fuser Kit Low” or “Fuser Kit Very Low” on your HP Color LaserJet M553 series printer is a warning that you have reached the recommended number of prints for your fuser assembly. (The fuser assembly is the consumable part in your printer which heats up and bonds toner to the paper.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP 4250 13.06.00 Fuser output paper stop !
ANSWER : pick up solenoid

Read Full Q/A … :

HP LaserJet 4250

HP Laserjet 4250 – RFU LOAD ERROR
ANSWER : Italiano:

Read Full Q/A … :

HP LaserJet 4250

Service manual for an HP Laserjet 4250 (or 4250n)
ANSWER : Hello all,Can someone please tell me where to find service manual for a 4250 or 4250n printer?I used Google, Fileshare.eshop.bg, peer-to-peer, but with no avail …Thanks alot for your answers!

Read Full Q/A … :

HP LaserJet 4250

HP Laserjet 2200, Tray 2 Pickup Problem, Gears Clicking
ANSWER : Definitely not a solenoid problem. I’ve worked on tens of thousands of printers and never replaced a single solenoid. You probably knocked something loose when you installed the pickup roller. Maybe something to do with the gear on the end of the pickup roller shaft. You’ll need to take the gear assembly off to be able to see it.

Read Full Q/A … :

HP LaserJet 4250

HP LaserJet 49 Error Troubleshooting
ANSWER : One must give a chance to 25dollarsupport its a Fix $ price Computer Tech support company, which is the best option in present crowded market. Quite dependable and cost effective..

Read Full Q/A … :

HP LaserJet 4250

HP Laserjet 4200 50.2 Fuser error
ANSWER : if you are using a good fuser the next part to try would be low voltage power supply

Read Full Q/A … :

HP LaserJet 4250

HP 4250, error 54.1 Remove sealing tape from toner
ANSWER : I am having the same problem as everyone else can someone send me a new link or the pdf

Read Full Q/A … :

HP LaserJet 4250

Laserjet 4250 print quality issue (see image)
ANSWER : It looks like a fuser problem. One way to prove it is with the half-stop test. Put a sheet in the drop down manual feed tray. Send a print job and watch the paper. When the end of it is about to enter the printer, open the lid and take out the toner cartridge. Look at the printed image. If it looks OK, then it is a fuser problem. If not, then it is a toner cartridge issue since it hasn’t gone through the fuser.

Read Full Q/A … :

HP LaserJet 4250