HP LaserJet 4200N
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
There are times when you will not see any jobs in the print queue yet when you power the printer on and it comes to ready the data light will blink and a 49 error appears. Be assured there is some kind of data being sent to the printer. In this case, you can try initializing the print spooler.
It is most likely caused by a print job, so the first thing you need to do is to delete any jobs in your print queue. One way to determine if its a job is to power off the printer disconnect whatever cable you have it connected to the outside world by and then power it back on and see if you still get the message.
HP`s printer service manual says the 49 error can be caused by a bad command, corrupt data, invalid operations, firmware, formatter, or possibly by accessories like an EIO card or memory. Some reports even say extra trays, duplexers, envelope feeders, etc., under certain circumstances, can cause this error.
A 49 error typically occurs when the printer attempts to perform an action that the firmware is not capable of performing or might not be designed to handle, for example: Printing files that include unsupported printer commands. Interfacing with a third-party solution that was not designed to work with the printer.
This error might happen at any time for multiple reasons. The most common causes are due to the printer being asked to perform an action that the firmware is not capable of, and might not have been designed to perform, such as: Printing files with unsupported programming commands.
What causes HP error 49.4 c02? According to user reports, the error often occurs when printing certain PDF files or some special fonts. The HP printer error 49.4 c02 can be caused by outdated firmware and improper drivers.
This error might happen at any time for multiple reasons. The most common causes are due to the printer being asked to perform an action that the firmware is not capable of, and might not have been designed to perform, such as: Printing files with unsupported programming commands.
Resolution: The F49 is a DC over voltage, this will occur if the battery exceeds(35 VDC) for a 24 Volts and (70 VDC) for a 48 volt system.
Service Error means any failure of Software Solutions to be available or otherwise perform in accordance with the Documentation, or any other error, flaw, failure or fault in the Online Services that causes it to produce an incorrect result, or to behave in unintended ways.
A 49.38. 0C indicates an internal firmware error has occurred. The root cause of this can vary depending on the version of firmware running on the device. Knowing what version your HP LaserJet CP5525 is running would help us in diagnosing the issue.
This error can be caused by having insufficient memory on the device. e.g. multiple apps are installed on the MFP at the same time. Note đź’ˇ It is recommended for the PaperCut partner to do the steps below, as opposed to the end customer, as the MFP will need to be reconfigured with PaperCut Hive and PaperCut MF.
A “49. DE. 05 Webkit encountered a fatal error, unable to recover`” error message displays on the control panel of an HP LaserJet Enterprise or an HP PageWide Enterprise printer with an installed software solution, causing the printer to automatically restart or prompts for a restart.
d9 apparently is “Error loading Boot Option (LoadImage returned error)” which is maybe caused by multiple drives being installed in the system and boot order being not set up properly. 1. Do you have multiple drives?
An Er/02 error message indicates the top cover is not closed completely.
This is a firmware error. Usually, the culprit is a print job that is “confusing” your printer. First, try disconnecting the printer from the computer (or from the network.) Then, turn the printer on and see if it comes to ready.
If it does it means there is a print job trying to print to that printer causing the error. You will need to remove the printjob, reconnect the printer, turn it on and first thing update the firmware to the latest version.
Some random crash 49.38. 13 may happen when the BarDIMM Pro is installed in the printer equipped with that firmware and other solutions. The defect is fixed in HP Futuresmart 5.2 firmware. If your HP printer does not have Futuresmart 5.2 available, we recommend you downgrade to Futuresmart 4.11.
Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.
This error might happen at any time for multiple reasons. The most common causes are due to the printer being asked to perform an action that the firmware is not capable of, and might not have been designed to perform, such as: Printing files with unsupported programming commands.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
HP LaserJet 49 Error Troubleshooting
ANSWER : One must give a chance to 25dollarsupport its a Fix $ price Computer Tech support company, which is the best option in present crowded market. Quite dependable and cost effective..
Read Full Q/A … :
HP LaserJet 4200N
HP Laserjet P3005 Hangs (with error 49.4C02)
ANSWER : Just change the data cable of printer. It will be solved.
Read Full Q/A … :
HP LaserJet 4200N
HP Laserjet M3035xs error 13.17.00
ANSWER : If the misstep thinks of no interface join connected with the unit, pay for my research paper then most times the issue is the hard circle and it ought to be supplanted.
Read Full Q/A … :
HP LaserJet 4200N
HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr
Read Full Q/A … :
HP LaserJet 4200N
HP Laserjet 4250 – RFU LOAD ERROR
ANSWER : Italiano:
Read Full Q/A … :
HP LaserJet 4200N
HP Laserjet 4100 Error (13.1)
ANSWER : I am pretty late to the party for this discussion but I am incredibly thankful to the person that posted this “fix” that I can barely imagine it. My 4100 had developed the dreaded paper jam described above and I had no idea what was causing it. I replaced a number of rollers only to have the same problem re-occur with no solution in sight.
Read Full Q/A … :
HP LaserJet 4200N
HP Laserjet 4200 50.2 Fuser error
ANSWER : if you are using a good fuser the next part to try would be low voltage power supply
Read Full Q/A … :
HP LaserJet 4200N
hp laserjet 4250n service error 49.4c02
ANSWER : The response by DMZCompute worked perfectly. Thank You!
Read Full Q/A … :
HP LaserJet 4200N