HP LaserJet 2200dn picking up two sheets at a time

1. Causes of Multiple Sheet Feed. Multiple pages being fed through the printer overlapping or in a stack occurs when the media fails to separate correctly in the tray. Common causes are issues with the print media, incorrectly adjusted paper trays and worn or contaminated feed or separator rollers.

The paper trays are overloaded. The paper is curled. The print side, or shiny side, of the paper is not loaded in the tray face down. The paper guides are too tight against the paper stack.

Canon MF3010 Digital Multifunction Laser Printer

This printer has a printing speed of up to 18 A4 pages per minute. So, it is quick and efficient for almost all your tasks.

Click File > Print. Under Settings, click One page per sheet, and then choose Multiple pages per sheet in the list. Click Print.

Doubling is a register problem that mainly occurs between plate and blanket within the unit. Too much blanket to paper pressure. Reduce printing pressure to a minimum. Too much plate to blanket pressure.

Laser printer is to print the entire page at one time.

The correct answer is option 2, i.e. Page. It processes and prints a whole page at a time. Laser printers and LED printers are its types.

The monthly duty cycle limit is 30,000 pages, with a recommended monthly duty cycle of 500 to 3500 pages. The sort of print job you`re running can be very stressful on the printer; I`d suggest that you allow the printer to cool down for 10-15 minutes every 500 or so pages.

When a new cartridge is installed it prints the calibration test page to check that it is aligned properly. With many HP printers you need to then scan the test page, so the printer can set itself up correctly.

If your printer is continuously feeding blank sheets of paper (meaning that it will just keep spitting out blank sheets without stopping, even when you power it off and back on) you probably have a sticking pickup solenoid.

Misfeeds occur frequently. The number of sheets loaded exceeds the capacity of the printer. Load paper only as high as the upper limit markings on the side fences of the paper tray, or the markings on the paper guides of the bypass tray.

Misfeeds occur frequently. The number of sheets loaded exceeds the capacity of the printer. Load paper only as high as the upper limit markings on the side fences of the paper tray, or the markings on the paper guides of the bypass tray.