HP LaserJet 2

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The printer is either low in toner, the density is set too low, or the Economode may be turned on. Remove the toner cartridge and shake it. This will redistribute the toner and often will temporarily solve the problem. However, this usually indicates it is time to install a new cartridge.
An Er/02 error message indicates that the toner cartridge door is open or not closed completely. To resolve the error, open the toner cartridge door, and then close it completely.
Open the document, and then click File > Print. Select your printer, and then click Printer Properties, Preferences, or Printer Setup. From the print settings, select the option for a two-sided print job.
Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.
Quick fix. Error code e02 occurs due to overheating of the printhead or when the paper is not correctly placed into the input tray and therefore the paper feed rollers are unable to pick up the paper from the paper tray.
The “Error Code 02” or “01” means that there is a problem with the software on the unit.
These duplex printing is not working problems can be fixed by reinstalling applications, resetting settings and preferences. Sometimes some OS files, as well as drivers, can get out of date and trigger issues with performance or program procedures.
Go to the Printers tab and select your printer from the list. In the Administrators drop-down list, choose Set Default Options. To enable double-sided printing, select Long-edge Binding or Short-Edge Binding for the Two-Sided option. To disable double-sided printing, choose Off.
Your printer can become misaligned if there is any paper stuck in the machine, print cartridges are clogged or dirty, improper installation of cartridges and using low quality cartridges. Additionally, a printer can become misaligned after the machine completes a large print job.
If your printer is running low on ink, it may start printing blank pages. To check your ink levels, go to your printer`s control panel and select the Ink Levels option. Whenever the ink levels are low, replace the cartridges with new ones. You can also try shaking the cartridge gently to redistribute the ink.
Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.
The Print Spooler is software built into the Windows operating system that temporarily stores print jobs in the computer`s memory until the printer is ready to print them. In some circumstances you may need to stop and/or restart the service.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
There are numerous possible causes for a printer that`s randomly producing blanks. The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles. Driver and software issues can sometimes cause this problem as well.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP Laserjet 2200, Tray 2 Pickup Problem, Gears Clicking
ANSWER : Definitely not a solenoid problem. I’ve worked on tens of thousands of printers and never replaced a single solenoid. You probably knocked something loose when you installed the pickup roller. Maybe something to do with the gear on the end of the pickup roller shaft. You’ll need to take the gear assembly off to be able to see it.

Read Full Q/A … :

HP LaserJet 2

HP Color Laserjet 3800 problem when printing color
ANSWER : Do a cold reset

Read Full Q/A … :

HP LaserJet 2

HP LaserJet 2200D won't print configuration page
ANSWER : Find someone with a HP LaserJet 4100 and you can configure the card to the IP you want:

Read Full Q/A … :

HP LaserJet 2

HP Laserjet 1320tn printing grey instead of black
ANSWER : Try this test. Put a page into the manual feeder and do that same test. When the end of the page is just about to enter the printer, open the lid. Take out the toner cartridge and pull back the shutter. Look at the image and see if it is black. The explanation is that there is high voltage going to both the toner cartridge and the charge transfer roller below it. If the image on the drum is black, then the fault is at the transfer roller not getting enough high voltage. The transfer roller pulls the image off of the drum and down onto the paper. It would not be a laser scanner problem as any issue with it would not result in an overall gray image, but combination of gray and black. It will probably turn out to be a bad HV power supply, which will need replacement. I’ve never seen this particular problem on this model.

Read Full Q/A … :

HP LaserJet 2

HP Laserjet 4250 – RFU LOAD ERROR
ANSWER : Italiano:

Read Full Q/A … :

HP LaserJet 2

HP Laserjet M3035xs RFU Upgrade
ANSWER : There’s no way.

Read Full Q/A … :

HP LaserJet 2

How to copy a card slot in HP laserjet 4250N
ANSWER : None that I know of, using a computer is likely your best option but I never attempted it.

Read Full Q/A … :

HP LaserJet 2

HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr

Read Full Q/A … :

HP LaserJet 2