HP LaserJet 1300 makes a clicking noise.

HP LaserJet 1300

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

NOTE: If the paper guide is too tight against the rear edge of the paper stack, the machine may make a loud clicking noise since the gears that drive the tray up may be binding. Be sure to leave a very small gap at the rear edge of the paper stack before locking the tab. 3.

A clicking sound may occur if the stirring spring assembly inside the Toner Cartridge catches on a rib within the cartridge, preventing the stirring spring and its gear from turning. The resulting click is caused by the drum`s toner drive gear slipping against the stirring spring gear on the Toner Cartridge.

Possible causes

A piece of paper, or other obstruction, is stuck somewhere inside the printer. One of the toner cartridges or photo developer units may be installed incorrectly or may be damaged. A door or cover may not be closed completely. A roller or gear on a paper feed option may need repair.

If your inkjet printer is randomly making noise when not in use, it is cleaning the printhead. Those noises are your printer performing some self-maintenance.

A click is a unit of measurement the imaging industry uses to count an image produced by an MFP or other printing device.

Laser printers are not very noisy in operation. Compared to the thump-thump of an inkjet and the shriek of dot-matrix machines they are generally quiet. Larger printers do tend to have a couple of cooling fans and there will be the usual noises of pickup rollers, paper moving, cogs churning and clutches operating.

Impact printers function by creating a direct contact between the ink-ribbon and the paper. These printers are noisy, yet popular. Impact printers have mechanical moving parts to conduct printing.

The printer makes a variety of noises during its power up procedure. These noises consist of different clicking, beeping, and whirring noises. These should be considered normal operation if they happen only during power up and not during printing.

The clicking sound means that the stepper motor is having to suddenly exert more force than a specific preset threshold and it`s jumping back by one or more steps (skipping) to relieve the pressure. It can be a mechanical issue, electrical issue, software issue, jammed/clogged hotend, or a combination of this.

One of the most common causes of extruder clicking is related to temperature settings. If the print temperature is too low, unmelted filament will start to clog the nozzle and prevent consistent filament feeding. Increase the print temperature gradually to see if it helps.

Some of the most common printer problems that most of us have experienced include paper jamming, slow printing, uneven printing, and wrong colour output. If you use your printer frequently, we know how annoying it can be to have persisting problems with the printer.

A click can be defined as a rotation of the printing cylinder. If we printed 50 copies on one side, the printer would pay a set maintenance/consumable fee based on 50 impressions or “clicks.” If these 50 copies were printed two sides as a “duplex” job, he would be charged for 100 copies.

Right click on the sound icon in the taskbar and go to sounds . Or you can directly search Sounds in the control panel . Once opened in the Sounds Tab , scroll down to “Select ” and then do the sound to None .

One of the most common causes of extruder clicking is related to temperature settings. If the print temperature is too low, unmelted filament will start to clog the nozzle and prevent consistent filament feeding. Increase the print temperature gradually to see if it helps.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP PSC 2410 clicking noise problem

ANSWER : I have the same issue… I’ve tried everything above… I don’t believe it’s dust as this happens on and off occasionally… I think I may need to make a youtube video of me “fixing” this printer! I’m really frustrated with this thing!! If it doesn’t work soon, I’m gonna by the solution in the form of a hammer!

Read Full Q/A … :

HP LaserJet 1300

HP Laserjet 2200, Tray 2 Pickup Problem, Gears Clicking

ANSWER : Definitely not a solenoid problem. I’ve worked on tens of thousands of printers and never replaced a single solenoid. You probably knocked something loose when you installed the pickup roller. Maybe something to do with the gear on the end of the pickup roller shaft. You’ll need to take the gear assembly off to be able to see it.

Read Full Q/A … :

HP LaserJet 1300

M425 printer makes noise

ANSWER : Try starting you printer ON without the cartridges. If it still makes the same noise, then it is most probably you fusing unit gears are broken. Check also for objects that might been stucked to the gears inside.

Read Full Q/A … :

HP LaserJet 1300

HP Laserjet M3035xs RFU Upgrade

ANSWER : There’s no way.

Read Full Q/A … :

HP LaserJet 1300

HP Laserjet 4200 50.2 Fuser error

ANSWER : if you are using a good fuser the next part to try would be low voltage power supply

Read Full Q/A … :

HP LaserJet 1300

evenly spaced horizontal lines on hp laserjet III printout

ANSWER : The lines would be a toner cartridge problem. Which paper tray? The MF tray or the optional paper cassette?