HP LaserJet 1160 pick-up problem

HP DesignJet 30

Experienced technical support provide their insights in answering this question :

Take the black rubber roller out. Clean it and turn it 90-180 degrees so there is fresh rubber in the “corner”.

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Dust, paper fiber, and other debris might accumulate on the pick rollers and cause paper feed issues. To help prevent paper feed issues, clean the rollers inside the printer and in the duplexer (if equipped).

Remove the stack of paper from the tray. Check for obstructions inside the tray. Use a flashlight to view the mechanism inside the tray to make sure that nothing blocks the paper from engaging with the rollers. Even small pieces of paper can cause paper feed issues.

The scanner motor is unable to find the home position. This error typically occurs during the startup sequence. Turn the printer off, and on again, and then try the job again. The scanner motor is unable to find the home position.

With dot matrix printers, paper is often feed through pins on a wheel that grab and slowly move paper through the printer. With inkjet and other page printers, paper is fed through the printer with rollers that grab and move the paper through the printer.

The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles. Driver and software issues can sometimes cause this problem as well.

A piece of paper stuck in the paper tray or inside the printer can create a paper jam. Paper jams can occur for a variety of reasons, such as overloading the paper tray, loading different thicknesses of paper in the tray, or using paper that isn`t appropriate for your particular printer.

If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.

DECLINED 30

SYSTEM ERROR. The Card Verification Code is incorrect. Confirm the number with the cardholder and retry the transaction. If the error occurs again, refer cardholder to their bank.

When a 30.03. 30 error appears on the control panel, it indicates that there is an issue with the scanner. Turn off the printer. Turn the printer back on, and verify that the scanner moves.

A printer is a device that outputs data to be put on a physical item, usually a piece of paper. Printers operate by transferring ink onto this medium in the form of the image received from the host.

Pick up rollers are the rollers that pick up the paper from the tray and feed it to the printer. These parts have also been known to cause a jams after repeated use and eventually may need to be replaced.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP Laserjet 2200, Tray 2 Pickup Problem, Gears Clicking

ANSWER : Definitely not a solenoid problem. I’ve worked on tens of thousands of printers and never replaced a single solenoid. You probably knocked something loose when you installed the pickup roller. Maybe something to do with the gear on the end of the pickup roller shaft. You’ll need to take the gear assembly off to be able to see it.

Read Full Q/A … :

HP DesignJet 30

HP Color Laserjet 3800 problem when printing color

ANSWER : Do a cold reset

Read Full Q/A … :

HP DesignJet 30

HP LaserJet 1160 pick-up problem

ANSWER : Take the black rubber roller out. Clean it and turn it 90-180 degrees so there is fresh rubber in the “corner”.

Read Full Q/A … :

HP DesignJet 30

evenly spaced horizontal lines on hp laserjet III printout

ANSWER : The lines would be a toner cartridge problem. Which paper tray? The MF tray or the optional paper cassette?