HP LaserJet 1022
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
This looks like the paper is not aligned in the tray. Try to move the paper to the side it`s not printing and try again. Hope this will help.
Your copies may be cut off if the paper is loaded incorrectly in the Automatic Document Feeder (ADF) or paper tray, or if the paper size setting is not programmed correctly.
Check the Margin settings under File>Page Setup to make sure that the right margin is OK. Also check the paragraph format to make sure that you do not have a negative right indent which could be causing the text to extend into an area that is unprintable by your printer.
Make sure the correct print driver is being used. Make sure that the paper is properly loaded in the tray and manual feeder. Ensure the tray is correctly installed. From the control panel, navigate to: Settings > Paper > Tray Configuration > Paper Size/Type and ensure the setting matches the paper loaded.
When your printer leaves black lines, the lines indicate that there are excess toner powders on the rollers or transfer belt within the printer. As the paper is moved along by the rollers and transfer belt, any excess powder left on them can result in lines being left on the paper.
This issue may occur if the paper is loaded incorrectly in the paper tray or the paper size and tray settings are not programmed as needed.
The printer`s default print margins are 3.0 mm (0.118 inch) for the top, right, and left margins, and 12.7 mm (0.50 inch) for the bottom.
Margin information can usually be found in the documentation that came with the printer. Look in the technical specifications section for information on the top/bottom and left/right margins. Another easy way to find the margins is to use Microsoft Word.
• Flip on long edge will print the pages so that you flip them side-to-side like you would. for an up-right book or binder (ie. – along the long edge black arrow). • Flip on short edge will print the pages so that you flip them over the top as you would. for a calendar (ie./ – along the short edge red arrow).
If you find that your paper jams happen on only one side of the printer, there could be an issue with the paper feed. Often, something is blocking the path of the paper as it is fed through the rollers, such as a torn piece of paper.
In Word, borderless printing can be achieved by setting the page margins to 0 under “file” and “page setup”. To print borderless with Adobe Reader, you have click the “file” tab and select “print”. Select your printer from the drop-down menu. Now click on “properties” and select “borderless printing”.
To print doucment to pdf format without page cut off, you need setup the right print options, such as: scale to fit or fill page, select right print area, select the right paper size to print, etc.
In Word, borderless printing can be achieved by setting the page margins to 0 under “file” and “page setup”. To print borderless with Adobe Reader, you have click the “file” tab and select “print”. Select your printer from the drop-down menu. Now click on “properties” and select “borderless printing”.
To print doucment to pdf format without page cut off, you need setup the right print options, such as: scale to fit or fill page, select right print area, select the right paper size to print, etc.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
How to copy a card slot in HP laserjet 4250N
ANSWER : None that I know of, using a computer is likely your best option but I never attempted it.
Read Full Q/A … :
HP LaserJet 1022
Hp laserjet 2420dn
ANSWER : I would suspect the fixing film has wear. You can prove the theory by doing a half-stop test. This stops the print before it enters the fixing film assembly. Load paper in the drop down MF tray in the front. Send a print job and when the tail end starts to enter, open the cartridge lid on top to stop it. Then remove the toner cartridge and look at the paper. If you see the marks, it is from the toner cartridge. If you don’t, it would be coming from the fixing film since the paper hasn’t entered it.
Read Full Q/A … :
HP LaserJet 1022
HP Laserjet 4250 – RFU LOAD ERROR
ANSWER : Italiano:
Read Full Q/A … :
HP LaserJet 1022
HP Laserjet M3035xs RFU Upgrade
ANSWER : There’s no way.
Read Full Q/A … :
HP LaserJet 1022
HP Laserjet 4200 50.2 Fuser error
ANSWER : if you are using a good fuser the next part to try would be low voltage power supply
Read Full Q/A … :
HP LaserJet 1022
evenly spaced horizontal lines on hp laserjet III printout
ANSWER : The lines would be a toner cartridge problem. Which paper tray? The MF tray or the optional paper cassette?
Read Full Q/A … :
HP LaserJet 1022
HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr
Read Full Q/A … :
HP LaserJet 1022
Left side light printing
ANSWER : A possibility could be the Charge Transfer Roller mount on the left side broke and it’s not lifting up to push the paper up to the cartridge drum. Take the cartridge out and push down on each end and see if they respond in the same way.
Read Full Q/A … :
HP LaserJet 1022