Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

To brief on teh functionality- Fuser assembly is made up of heating element, thermistors, teflon etc. if thermistor is not able to reach to the operataing temperature so that it can send signal to the printer that i am ready to work, then it gives 50.0 error message.
Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.
A high fuser temperature error has occurred. Note: A fuser error might occur because of inadequate power supply, inadequate line voltage, or a fuser problem.
Error 50.8 suggests one end of the fuser is not heating up which may be damage to the sleeve or heavy media.
Click on your Apple menu and go to System Preferences. Then select Energy Saver and uncheck the option that says Put the hard disks to sleep when possible. Save the settings and check if error 50 is gone.
Machine Error 50 is an indication of a mechanical malfunction of the Brother machine. Unplugging the machine from the power outlet for approximately 30 seconds and then plugging it back in may temporarily resolve the issue.
The 50.2 fuser error message is a “Slow Fuser” error, which is a time-out error where the fuser is not warming up fast enough. If you see the error message “50.2 Fuser Error” on your HP Color LaserJet 2820 or 2840 series printer, you probably need to replace the fuser.
If you see this error code 50.5 on an HP LaserJet 4200, 4240, 4250, 4300, or 4350 series printer, the fuser installed in the printer is registering as an incorrect fuser for that model printer.
50.2 error indicates that the printer is not heating up fast enough. This can be caused by a bad heating element in the fuser but can also be caused when the printer does not have adequate power due to overloaded circuits or being plugged into a power strip or surge bar that limits current flow.
If you are seeing a “50.1 Fuser Error” on your HP LaserJet 5000 or 5100 series printer, you probably need to replace the fuser. Fusers are a consumable part and are sold as part of a maintenance kit; it is expected over the life of the printer you will replace the fuser several times.
unable to send sms error code 50 happens when the sms service has been blocked for 24hrs as per government rule. usually this happens after sim card replacement in any operator.
An event ID 50 message is logged if a generic error occurs when Windows is trying to write information to the disk. This error occurs when Windows is trying to commit data from the file system Cache Manager (not hardware level cache) to the physical disk.
unable to send sms error code 50 happens when the sms service has been blocked for 24hrs as per government rule. usually this happens after sim card replacement in any operator.
Error 50 is Invalid destination number. Are you trying to send a shortcode?
An event ID 50 message is logged if a generic error occurs when Windows is trying to write information to the disk. This error occurs when Windows is trying to commit data from the file system Cache Manager (not hardware level cache) to the physical disk. This behavior is part of the memory management of Windows.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr

Read Full Q/A … :
Unknown Printer

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :
Unknown Printer

Hp designjet 500 error code 11:11
ANSWER : I have an HP designjet 510 I just powered it on and it only shows error 11:11. does anybody have a solution?

Read Full Q/A … :
Unknown Printer

HP 9040 MFP Error code
ANSWER : bonsoir

Read Full Q/A … :
Unknown Printer

Error Code 52.1M
ANSWER : Magenta laser error. The spinning motor bearings cause the squeal and that slows it down causing the error. You could try opening it and lubricating the motor shift with a drop of synthetic lubricant. Do not use more than a drop.

Read Full Q/A … :
Unknown Printer

HP 4050 Error 13.1 & 13.20
ANSWER : I tried the fix you recommended but it still would not fix.

Read Full Q/A … :
Unknown Printer

HP Laserjet 4200 50.2 Fuser error
ANSWER : if you are using a good fuser the next part to try would be low voltage power supply

Read Full Q/A … :
Unknown Printer

error 50
ANSWER : Most likely the quartz lamp in the fuser assy. burned out. you can remove it and check the resistance on the 2 large pins in the connector. Should be several ohms.

Read Full Q/A … :
Unknown Printer