HP DeskJet 960c does not print yellow color

HP CopyJet Color

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Check the ink level on your printer and replace the low ink cartridge. Clean the printhead. The printhead could be clogged, and you might need to clean the printhead several times to restore print quality. Use an automated tool from the printer control panel to clean the printhead.

Start with checking the ink level in your toner. You can check the Ink Level by touching the ink drop icon on the printer display. Since you have a problem with printing in Yellow color check Yellow or Magenta ink level. If its ink level doesn`t appear, it could be an issue with either Yellow or Magenta cartridges.

Right-click your printer and select printing preferences. Then, click on the Grayscale button in the advanced tab to enable black-and-white-only printing.

Replace any low, empty or faulty ink cartridges on your printer. Dust or paper residue on the rollers or separator pad inside the automatic document feeder (ADF) can result in copy quality issues.

If your machine`s cyan, magenta, or yellow toners run out, you can choose Mono in the printer driver to allow you to keep printing. You`ll be able to keep printing until the black toner runs out.

Print a Nozzle Test pattern, if the yellow is orange then you have cross contamination in the Printhead and it might be purgeable, but you would have to print a lot of yellow. Cross contamination happens when some ink oozes out of one printhead and is wicked up into another color.

Clean the printheads: Sometimes the issue why you are unable to print in color is because our printheads are clogged with ink. Clean the printheads and then print a document to check if color printing works. Some printers also have in-built programs that can clean themselves so remember to check for that.

Depending on their composition, some papers will yellow faster than others. Yellowing of most digital prints by heat is usually very slow, unless recycled or groundwood containing papers were used.

Why is my printer printing yellow not red? It is most likely that your image is yellow where you were expecting it to be red and you may also notice that blue parts of the image appear turquoise instead. Both of these effects are caused by a lack of magenta ink/toner on your prints.

You can continue to print with one or more empty cartridges, but HP recommends replacing them as soon as possible to avoid printhead damage. 932, 933, 950, 951-959, 962-969 cartridges: Ink is required in all cartridges to print and to perform periodic servicing to prevent clogs and other print quality issues.

Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).

The light bar glows amber if there is a printing error. Look at the other lights on the printer to find and resolve the error you are experiencing. With the printer turned on, disconnect the power cord from the rear of the printer. Unplug the power cord from the wall outlet.

HP EasyColor scans documents and automatically adjusts photographic images in . JPEG or . PNG format. Rather than dividing an image into several pieces, HP EasyColor technology enhances the entire image at one time, which results in improved color consistency, sharper details, and faster printing.

Select Start > Settings . Go to Devices > Printers & scanners > select a printer > Manage.

First, locate your print head. Next, dip a q-tip in a mixture of isopropyl alcohol and warm, not hot, water. Swab the q-tip along your print head and dislodge any dry pieces of ink that may be causing blockages. Once you`re satisfied that your print head is clean, allow it to dry overnight.

If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.

You can visually inspect the remaining cartridge levels on your printer. If they are full but you still cannot print properly, check the cartridge`s expiry date. Expired ink cartridges often dry up which causes problems in the print results.

Reasons why your HP printer has ink but won`t print

This may seem obvious, but it sometimes happens: first make sure your paper tray has paper in it. Misalignment, clogged printheads, faulty data communication or insufficient ink levels can also be sources of the problem.

Reasons why your HP printer has ink but won`t print

Clean the printheads: Sometimes the issue why you are unable to print in color is because our printheads are clogged with ink. Clean the printheads and then print a document to check if color printing works. Some printers also have in-built programs that can clean themselves so remember to check for that.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

hp deskjet 960c printing problem

ANSWER : RE: HP 960c printer. I have new cartridges and the test page prints out full color. When printing a color document the page prints in black & white. Why not color? The print page is on color not black & white.

Read Full Q/A … :

HP CopyJet Color

HP Color Laserjet 3800 problem when printing color

ANSWER : Do a cold reset

Read Full Q/A … :

HP CopyJet Color

My 2550n Color LaserJet does not want to print in color

ANSWER : That model had issues with the carousel solenoid sticking. That might explain why it works after you let it sit for 10 minutes. The solenoid gets hotter with use which causes the deteriorated foam on it to become sticky and hold down the release plate instead of letting it go. This allows the carousel to spin when it is supposed to stop for each color. The solenoid is located on the right side of the printer. If you open the lid, it is just behind the opening at the top right. You need to remove the top of the printer and scrape off the goo on top of the solenoid body. I put a piece of thin sticky backed felt to replace it. Other people use electrical tape.

Read Full Q/A … :

HP CopyJet Color

HP Deskjet 640c wont print??

ANSWER : yes

Read Full Q/A … :

HP CopyJet Color

HP DESKJET 1280 ERROR

ANSWER : Help please! Printer power and paper lights continue to flash,- even after : encoder strip cleaned, carriage rod lubed, carriage is not stuck, rollers cleaned, no paper jambed . I know this is a variation on an existing theme, but could anyone help solve the issue.Many thanksKen

Read Full Q/A … :

HP CopyJet Color

HP DeskJet 1220C Prints only Pink & Black

ANSWER : hi everyone. i have an hp ink advantage 5525 all-in-one. changed all cartridges as they were empty and when i tried to print i got blank pages. i gave a print order a couple times to find out what was going on and found out that yellow and magenta inks worked but not cyan and black. removed cartridges, clean and all many times and nothing happened. then i tried this youtu.be/f57jOGj-G5s and the print quality of magenta and yellow improved significantly but still no black or cyan at all. i can’t do the running water thing because the print head is not detachable. any suggestions?

Read Full Q/A … :

HP CopyJet Color

HP Color Laserjet blank pages – only jetdirect page

ANSWER : What about the engine test? To do that, drop down the front tray. Feel around on the left side at the top and you’ll feel a little plastic dongle. If you lift up on that it will initiate an engine test page. That will be a page containing lines of each color.

Read Full Q/A … :

HP CopyJet Color

color is not printing true

ANSWER : I changed all toners and drum and it is still doing it.

Read Full Q/A … :

HP CopyJet Color