HP CopyJet Color

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Check the options on the property tabs to make sure that the appropriate color options are selected. If there is a checkmark in the box by Print in Grayscale, click in the box to remove the checkmark, and then click OK. Try printing again.
1. Check Remaining Ink / Toner Levels & Replace Cartridge if Necessary. Before you do anything complicated, make sure that your printer is not running out of ink or toner. You can visually inspect the remaining cartridge levels on your printer.
The printhead could be clogged, and you might need to clean the printhead several times to restore print quality. Use an automated tool from the printer control panel to clean the printhead. CAUTION: Never turn off the printer when ink cartridges are missing.
There`s a trick to printing in color: You must select the color printer in the print menu AND make sure the document is set to print in color under “Printer Properties.” (Most of the time, the color printers default to “color” as the output).
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
Make sure the Black/Grayscale or Grayscale setting is not selected in your printer software. Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. The ink levels may be low and you may need to refill the ink.
Reasons why your HP printer has ink but won`t print

This may seem obvious, but it sometimes happens: first make sure your paper tray has paper in it. Misalignment, clogged printheads, faulty data communication or insufficient ink levels can also be sources of the problem.

The most common reason for that is print head clogging. To improve the situation, you may start a cleaning cycle on your printer (make sure to see the manual for a reference). We recommend our customers running a couple of cleaning cycles before installing a cartridge if they switch to a new ink producer.
Select Start > Settings . Go to Devices > Printers & scanners > select a printer > Manage.
If you print in mostly black, your black cartridge will naturally run out faster than the color cartridges. However, some printers will pull a bit of ink from the color cartridges when you are printing solely in black, just to keep them primed for future use.
Printers that use two cartridges (one black, one tri-color) can print if one cartridge is empty. To continue printing, remove the empty cartridge from the printer. If a Single-cartridge mode message displays, select OK. If you are using the black cartridge, prints are in black and white (grayscale).
Black Print Mode allows you to print only with black ink as a temporary emergency measure to minimise the down time in the event any colour inks are expended, even if there is no replacement cartridges available.
Individual HP ink cartridges

Printers that use individual HP ink usually need a set of four color cartridges: black, cyan, magenta, and yellow.

HP LaserJet Pro color MFP M570 – Color printing.
Ink cartridges can dry out over time. If they are sitting in your machine for an extended period, they will eventually dry up and become unusable. The simplest way to combat this problem is by printing more frequently or running regular cleans and ink tests to ensure the nozzles remain clean.
Clean the printheads: Sometimes the issue why you are unable to print in color is because our printheads are clogged with ink. Clean the printheads and then print a document to check if color printing works. Some printers also have in-built programs that can clean themselves so remember to check for that.
Clean the printheads: Sometimes the issue why you are unable to print in color is because our printheads are clogged with ink. Clean the printheads and then print a document to check if color printing works. Some printers also have in-built programs that can clean themselves so remember to check for that.
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
Click Start, go to Devices and Printers, right-click on the icon for your printer and select “Printing preferences.” There should be a “Color” tab. Look at that and make sure that “Print in Grayscale” is not selected. Click OK. The figure below is from a different HP printer, buy yours should be similar.
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP DESKJET 1280 ERROR
ANSWER : Help please! Printer power and paper lights continue to flash,- even after : encoder strip cleaned, carriage rod lubed, carriage is not stuck, rollers cleaned, no paper jambed . I know this is a variation on an existing theme, but could anyone help solve the issue.Many thanksKen

Read Full Q/A … :

HP CopyJet Color

HP deskjet 460 Waste ink tank full
ANSWER : I worked fixing printers for 5 years for Verizon and some of the older printers were notorious for the waste receptacle filling and overflowing with ink. My solution was good old warm water. Remove the waste container and scoop out as much as you can with a small screwdriver, wiping the discard on a paper towel, then just run warm water from the faucet into the container till all the residue is removed. This is just water soluble ink folks, if you want to test it, scoop out a glob and dissolve it in warm water, its easy as pie. I never once bought a new ink discard reservoir. I just cleaned out my mobile 460 printer reservoir by the same method. There are no electrical connections its just all plastic.

Read Full Q/A … :

HP CopyJet Color

HP DeskJet 950C Leaking Ink
ANSWER : Thanks for the “loose, white rectangular piece” comment in my 990cse. I found this same white piece of rubber today jamming up the cleaning station carriage assembly and was wondering where it came from!

Read Full Q/A … :

HP CopyJet Color

HP DeskJet 1220C Prints only Pink & Black
ANSWER : hi everyone. i have an hp ink advantage 5525 all-in-one. changed all cartridges as they were empty and when i tried to print i got blank pages. i gave a print order a couple times to find out what was going on and found out that yellow and magenta inks worked but not cyan and black. removed cartridges, clean and all many times and nothing happened. then i tried this youtu.be/f57jOGj-G5s and the print quality of magenta and yellow improved significantly but still no black or cyan at all. i can’t do the running water thing because the print head is not detachable. any suggestions?

Read Full Q/A … :

HP CopyJet Color

hp deskjet 3420- system error
ANSWER : Hi I am having problem in printing from java file , I followed all your steps but C:\\WINDOWS\\system32\\spool\\drivers\\w32x86\\3 after this I am getting no files in this folder ,please help me as I am struggling to get print from java since a week

Read Full Q/A … :

HP CopyJet Color

HP DeskJet 722C Paper Feed Problem
ANSWER : Detach the force string from the holding nothing back one and expel all paper from it.

Read Full Q/A … :

HP CopyJet Color

HP Deskjet 5150
ANSWER : Ok I have the same problem, Kemal. HOW DO YOU DISASSEMBLE the printer carriage and the Ink Service Station from that??

Read Full Q/A … :

HP CopyJet Color

HP Deskjet 1120C
ANSWER : I have just experienced a similar problem after cleaning out the ink build up without removing the outer case. The two lights are flashing and the ink cartridges end up on the far left after jumping back and fore a few times.

Read Full Q/A … :

HP CopyJet Color