HP Color LaserJet 1500

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Press your printer`s Setup button. Go to System Setup. Choose Print Quality and then Calibrate Color. Choose Calibrate Now and press OK.
A common cause of faded, faint printouts from your inkjet printer is dried ink particles causing a blockage in your printer. The printheads on an ink cartridge can be become blocked if the printer is not used for a period of time, so it is recommended to print a few pages each month to maintain the print quality.
To print in single-cartridge mode, remove one of the ink cartridges, and then continue to print as usual. The printer control panel or computer screen might display a message to install the missing cartridge. To clear the message and continue with the print job, click or press OK.
If your printouts have incorrect colors, try these solutions: Make sure the paper type setting matches the paper you loaded. Make sure the Black/Grayscale or Grayscale setting is not selected in your printer software. Run a nozzle check to see if any of the print head nozzles are clogged.
Check the toner level

The first step for light and faded prints is to check that your toner cartridge is not running low or empty. If your laser printer has a built-in LCD screen, you should be able to view the toner levels on screen or via a printed test page accessed in the settings menu.

Check the Margin settings under File>Page Setup to make sure that the right margin is OK. Also check the paragraph format to make sure that you do not have a negative right indent which could be causing the text to extend into an area that is unprintable by your printer.
You can print when one printer cartridge is empty by adjusting your printer`s settings. However, it will depend on how lenient your printer is. Numerous HP printers today, however, have been programmed to block you from printing when one printer cartridge is empty.
There are no complicated instructions for this mode, all you have to do is remove the empty cartridges from your printer and close it back up with the single full cartridge installed. During single-cartridge mode, the printer will only print jobs initiated from the computer.
Select Start > Settings . Go to Devices > Printers & scanners > select a printer > Manage. Then select Set as default. If you don`t see the Set as default option, the Let Windows manage my default printer option may be selected.
Why is your printer printing pink? Your printer may be printing pink as the other ink cartridges have run out. Common printer-to-page technology processes colour in four parts; cyan, magenta, yellow and black (CMYK), or toner. The ink cartridges in your inkjet or colour laser printer are split up into four colours.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP Color Laserjet 3800 problem when printing color
ANSWER : Do a cold reset

Read Full Q/A … :

HP Color LaserJet 1500

My 2550n Color LaserJet does not want to print in color
ANSWER : That model had issues with the carousel solenoid sticking. That might explain why it works after you let it sit for 10 minutes. The solenoid gets hotter with use which causes the deteriorated foam on it to become sticky and hold down the release plate instead of letting it go. This allows the carousel to spin when it is supposed to stop for each color. The solenoid is located on the right side of the printer. If you open the lid, it is just behind the opening at the top right. You need to remove the top of the printer and scrape off the goo on top of the solenoid body. I put a piece of thin sticky backed felt to replace it. Other people use electrical tape.

Read Full Q/A … :

HP Color LaserJet 1500

HP Color Laserjet 2840 spitting out blanks
ANSWER : Moe- You are the man!

Read Full Q/A … :

HP Color LaserJet 1500

HELP! HP Color Laserjet 5500dn (formatter prob??)
ANSWER : Italiano:

Read Full Q/A … :

HP Color LaserJet 1500

HP Color LaserJet 4700
ANSWER : Saludos Amigo le Que le Pasa a tu Impresora Es Que Tienes rota El Sistema de sierre de la puerta con el Cierre de los tóner es Por Esa Razon Que No Cierra los tóner Si Quieres repararla Ponte en Contacto Madrid Seis Cinco Cinco Tres Cuarenta dos cuarenta y uno Reparación en el Momento saludos

Read Full Q/A … :

HP Color LaserJet 1500

Reset HP Color Laserjet 4700 transfer kit
ANSWER : How about the situation when resistor does not reset the transfer belt count and even new transfer belt out of the box is not doing it. Do you have any idea how to solve this problem? I did reset transfer belts and fusing units on several HL 4700 printers with no problem but also I came across few which were not possible to reset even with oryginal parts.

Read Full Q/A … :

HP Color LaserJet 1500

HP Color Laserjet blank pages – only jetdirect page
ANSWER : What about the engine test? To do that, drop down the front tray. Feel around on the left side at the top and you’ll feel a little plastic dongle. If you lift up on that it will initiate an engine test page. That will be a page containing lines of each color.

Read Full Q/A … :

HP Color LaserJet 1500

HP Color LaserJet 4550 Streaking
ANSWER : hello,

Read Full Q/A … :

HP Color LaserJet 1500