Unknown Printer

Experienced technical support provide their insights in answering this question :
my printer cp5225 is giving me error code 55.0601 message which i can’t fix please help

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

HP LaserJet color printer CP5225 stops Printing and shows Error 55.0601. For this problem, you can try out these four solutions I recommend. Usually, having this error is caused by an internal hardware malfunction. You can first try turning off the power and wait for thirty seconds before turning it on again.
55 error codes are NVRAM issues and rarely caused by the cartridge. Bad power is a common cause. Make sure the printer is plugged directly into the wall outlet and not into a surge protector, multi outlet strip or UPS.
The 55.1 error relates to a memory error on the dc controller. Make sure the printer is plugged directly into the wall socket and not a surge protector. If the error is still there, then you need to contact hp customer care in your location to get warranty service since it would appear parts will need to be replaced.
This error code occurs when the Dpcdll.dll file is missing or corrupted.
55.0602 = DC controller NVRAM access error.
Event ID 55 is reported if the operating system detects the file system structure on the disk is corrupt and unusable.
If your printer is turned on, disconnect the power cord from the printer. Keep the power plug unplugged for 60 seconds, reconnect the power cord to the wall, and turn on the printer. If the error persists, remove the cartridge from the printer, clean the cartridge contacts with a cloth, and reinstall the cartridges.
60 Black drum motor rotation abnormality.
If you come across error code 0x80070057, it means there was a problem with your storage solution, whether it`s a hard drive or SSD.
Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.
Error 0x0000011B is a common issue on Windows systems and can have various causes. Here are the most common causes and how to resolve them: Driver conflict: This happens when two drivers access the same resources at the same time. To resolve this issue, check for any conflicting drivers and update or disable them.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP CLJ CP 5225 ERROR 55.0601
ANSWER : my printer cp5225 is giving me error code 55.0601 message which i can’t fix please help

Read Full Q/A … :
Unknown Printer

HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr

Read Full Q/A … :
Unknown Printer

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :
Unknown Printer

HP 4250n error 13.05.00 Phantom Jam
ANSWER : Pull and reset the fuser. Make sure both sides are back into their position.

Read Full Q/A … :
Unknown Printer

HP 4050 Error 13.1 & 13.20
ANSWER : I tried the fix you recommended but it still would not fix.

Read Full Q/A … :
Unknown Printer

HP Laserjet 4200 50.2 Fuser error
ANSWER : if you are using a good fuser the next part to try would be low voltage power supply

Read Full Q/A … :
Unknown Printer

HP 9040 MFP Error code
ANSWER : bonsoir

Read Full Q/A … :
Unknown Printer

HP Laserjet 4250 – RFU LOAD ERROR
ANSWER : Italiano:

Read Full Q/A … :
Unknown Printer