HP Business Inkjet 3000

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Paper that is loaded incorrectly in the input tray might prevent the tray from closing completely. Remove any paper from the input tray, and then reload the paper correctly before closing the input tray. Grasp the handle on the input tray, and then pull the tray toward you to open it.
On the Windows taskbar, click the Windows icon ( ), and then select Printers and Faxes. Right-click your product, and then select Printing Preferences. From the Printing Preferences menu, select Paper/Quality. From the Paper Source drop-down menu, select Tray 2.
Solution. Open the tray for more than one second, verify that paper is loaded, and then close the tray. This should eliminate the “Tray Empty” message so the printer can resume printing.
Tray 2 holds up to 250 sheets of 75 g/m2 paper.
The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray.
Sometimes paper can get stuck behind the tray and get stuck in the sensors and arms that detect paper size and detection. You can remove the tray completely from the machine and look at the feed unit and rollers and make sure there is no obstruction or paper stuck.
Paper Overloading

Because many desktop inkjet printers are top-loading, it can be easy to overload the tray.

The most common cause of this issue is paper misalignment. Make sure you properly insert the papers in the tray and avoid overfilling the tray. If this doesn`t solve the problem, check the troubleshooting section of the printer`s user manual.
just GOTO settings > printer properties of your printer > preferences>paper quality >change the paper to A4 size . and restart the printer.
Load tray errors when the tray is full are usually the result of a mismatch between the size/type of paper requested by the PC, and the size/type of paper present or set on the printer.
To exclude the bypass tray from the trays that can be selected when [Auto Select] is selected: In “Setting mode (administrator)”, select [System Settings] → [Printer Settings] → [Default Settings] → [Bypass Tray Settings] → [Exclude Bypass-Tray from Auto Paper Select].
The paper tray is empty or overloaded. The paper is curled. The print side, or shiny side, of the paper is not loaded in the paper tray face up. For photo paper, always load the rougher side of the paper facing down.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Paper jam in tray 2 (but no paper pulled from tray) also M476DN models
ANSWER : Isopropyl alcohol is not recommended for rubber rollers. It dries out the rubber and hasten it’s cracking and breaking. It will do nothing to restore the grip. Those rollers are really hard to replace. It would be easy if that dumbass secondary menu really worked. None of the techs I’ve spoke to ever got into it. Everyone I know sends a print job and listens for the roller to rotate into position where you can pull it off.

Read Full Q/A … :

HP Business Inkjet 3000

HP Laserjet 2200, Tray 2 Pickup Problem, Gears Clicking
ANSWER : Definitely not a solenoid problem. I’ve worked on tens of thousands of printers and never replaced a single solenoid. You probably knocked something loose when you installed the pickup roller. Maybe something to do with the gear on the end of the pickup roller shaft. You’ll need to take the gear assembly off to be able to see it.

Read Full Q/A … :

HP Business Inkjet 3000

HP LJ 4350 – Tray 2 not lifting, no motors turn.
ANSWER : I can’t believe, pieces of paper was under the registration flap, now my 4250N is working.

Read Full Q/A … :

HP Business Inkjet 3000

I just bought an officejet 3830 2 weeks ago. Now it won't print at all! Says inkjet jam. It's not! I've done all the fixes as per hp's website now what?
ANSWER : Take it back and exchange it under warranty.

Read Full Q/A … :

HP Business Inkjet 3000

HP CLJ 2600 misaligned colours
ANSWER : Misaligned colors or printing.

Read Full Q/A … :

HP Business Inkjet 3000

Resetting of chip for hp toner Q6000A
ANSWER : HP Color Laser Jet 1600 – Thanks for all the above information. Even though the 1600 is a different printer, I followed the above: “…go to “System Configuration”; then to “Print Quality”; I then get a choice of “Replace Supplies” and then “Overide Out”…” Selecting “Overide Out” got my 1600 back to printing, although I did have do perform the steps TWICE before it seemed to take affect. Not sure what was going on, but I’m happy that people put the information out there for the rest of us to have.

Read Full Q/A … :

HP Business Inkjet 3000

HP 2200 – blinking attention light and tray 2
ANSWER : Nice day. (QUALITY IS OUR CULTURE)

Read Full Q/A … :

HP Business Inkjet 3000

HP Laser Printer error 13 – paper jam
ANSWER : Nice day. (QUALITY IS OUR CULTURE) Baihui Technology Co.,Ltd. is one of the grey hair in Guangzhou China. Our core competencies is Fuser Assembly for HP brand, Our niche market is USA. With us your money in safe your business in safe. Hope fully to be your honest dealer and trustworthy supplier in China. E-mail: [email protected]

Read Full Q/A … :

HP Business Inkjet 3000