HP LaserJet 9040
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
This usually occurs when one or more toners are not fully seated. Most times it is the black cartridge lock on the left side breaks so the black toner cartridge is sitting a bit out on the left side and the door will not close. Easy to tell. Just remove all the toners and see if you can close the door.
If you are seeing a “50.1 Fuser Error” on your HP LaserJet 5000 or 5100 series printer, you probably need to replace the fuser. Fusers are a consumable part and are sold as part of a maintenance kit; it is expected over the life of the printer you will replace the fuser several times.
Only authorized service people have access to the SERVICE menu, When you select SERVICE from the list of menus, the product prompts you to enter an eight-digit PIN number. The PIN for the HP LaserJet P4015 models is 05401508. The PIN for the HP LaserJet P4515 models is 05451508.
From the printer website, find the Web Services menu, and then click Print Info Page or Print Information Sheet. Find the Printer Code or Printer Claim Code on the page that prints. If the information page only has the printer`s email address, remove and then re-enable Web Services.
The most likely cause is that the latch isn`t engaging properly with the strike plate – the two crucial parts that need to interact in order for the door to stay closed. You`ll generally be able to tell by the absence of any clicks or snaps when you push the door closed.
1. You are plugged directly into a wall outlet, having the printer plugged into a surge protector or extension cord can cause the printer to not get enough power to function properly. 3. Make sure that the paper loaded inside the machine is not causing the door to not close.
The message `Fuser Error` or `Self-Diagnostic` means either the fuser has reached the maximum temperature allowed or there has been an error in detection of the correct temperature during specific times of the printing process.
HP Access Control (HP AC) Printing Solutions makes it easy to monitor and control imaging and printing costs—and to collect and track data by device and user—to help establish more responsible behaviors, lower expenses, and eliminate unclaimed documents.
The network security key is the password you need to set up a wireless internet connection.
They are a code made up of both numbers and letters, which you can input online in order to access additional study materials linked to a specific textbook or online courses and assessments linked to the topic in question.
1: Use a rope, power cord, or belt to tie the doorknob to a nearby heavy object. 2: Tape a broom handle perpendicular to the door frame, tying the handle to the doorknob to hold the door shut. 3: If applicable, secure a belt around the top of the door hinge.
This can happen for a variety of reasons, from a sudden power outage, low ink, no paper, a paper jam to interference by third-party firewall software.
If your printer displays a “door open” error message, the first thing to do is check the front panel to see if the nipple is still there. Check if you can click the front door panel shut. If it refuses to click closed, you will simply have to check for obstructions until you can get it to close.
If the cartridge door is not completely closed, the error message displays. Open, and then close the cartridge door of the product. Make sure that the door rests securely against the body of the product.
If you see the message HP cartridges locked and you are experiencing this issue then it`s very likely that you have recently had a printer update to enable cartridge protection or you have a brand new printer with this feature already built in.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
HP 9040 MFP Error code
ANSWER : bonsoir
HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr
Front panel under front door (holds developer & toner installation area)
ANSWER : Not familiar with that model, but all doors have a peg on each side that go into holes in the frame. Did you try putting one peg in and then flexing the door to get the other one in. Without seeing it, that’s the best I can offer.
door closed switch broken
ANSWER : Not familiar with how the inside of the door looks but you might be able to tear a piece of paper & bend it to fit in the sensor & tape it down. There is a piece of plastic that normally would be on the inside of the door & blocks the light sensor when the door closes. Sounds like that piece got broken but I’d imagine you can just block it with paper or thin cardboard & tape it in place to prevent it from falling loose.
HP 26 vs HP 29 cartridge compatibility
ANSWER : Eu decidi fazer um binário opções, o primeiro passo neste trabalho yavlyaetsya formação inicial e os fundamentos .. Put Options and Call Options Trading É por isso que eu escolhi um par de artigos de alguns sites na Internet, se você pode se perguntar vospolzovatsya put-call-options.com/br/what-are-options/binary-options-and-strategies
HP 4101MFP Hard Drive Question
ANSWER : To initialize: turn off – Press start and hold down while turning on, release after all three light light, you should see initialize disk hit check, and allow to boot.
HP PSC 2410 clicking noise problem
ANSWER : I have the same issue… I’ve tried everything above… I don’t believe it’s dust as this happens on and off occasionally… I think I may need to make a youtube video of me “fixing” this printer! I’m really frustrated with this thing!! If it doesn’t work soon, I’m gonna by the solution in the form of a hammer!
HP 4250n – blurry text
ANSWER : What is the fuser? And how can it be changed?