HP DeskJet 890C

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray.
1-3 of 3 Answers. The paper is stored in the bottom, under where you see the printed paper sitting on the tray. There is a tray on the bottom that pulls out to store the paper. So it would print from the bottom as well.
HP Printer Paper Tray Lock A Paper tray lock is used to prevent the tray from accidental use. The lock is used in printers that contain multiple trays. It is mainly used in printers while inserting special papers into the input tray.
Load the paper into the paper tray before sending the data to the printer. When the printer receives data from the computer, it feeds a single sheet and begins to print.
If roll paper does not feed, cut the end straight across and uncurl it by rolling it backward, if necessary. Then reload the paper. If thick media does not feed, make sure you are loading it straight into the product, not at an angle. If paper jams when you print on both sides of the paper, try loading fewer sheets.
Windows & Linux: Ctrl + p. Mac: ⌘ + p.
Updated: 02/07/2022 by Computer Hope. A paper jam is when paper or other printed material gets stuck or lodged in a printer and cannot eject. When this occurs, the printer does not function properly until the paper is manually removed.
Dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper jams and paper feed issues. Clean the rollers inside the printer, and then try to print again. Turn off the printer, and then disconnect the power cord.
Hold the printer with one hand and hold the paper tray with the other hand. Push or pull the paper tray sideways while holding the printer still.
The face-down tray is located on the top of the printer. Your printouts will be stacked facing down.
HP Printer Paper Tray Lock A Paper tray lock is used to prevent the tray from accidental use. The lock is used in printers that contain multiple trays. It is mainly used in printers while inserting special papers into the input tray.
On the Windows taskbar, click the Windows icon ( ), and then click Devices and Printers. Right-click your product, and then select Printing Preferences. From the Printing Preferences menu, select Paper/Quality. From the Paper Source drop-down menu, select Tray 2.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

hp 8600 pro when power on, paper jam message appear but there is no paper jam in the tray
ANSWER : Hp 8180 Photosmart All In One code keeps says paper jam and carriage jam when neither are jammed. I followed all the recommended things to do. I live in Raleigh NC any place to take this or any suggestion.

Read Full Q/A … :

HP DeskJet 890C

Paper jam in tray 2 (but no paper pulled from tray) also M476DN models
ANSWER : Isopropyl alcohol is not recommended for rubber rollers. It dries out the rubber and hasten it’s cracking and breaking. It will do nothing to restore the grip. Those rollers are really hard to replace. It would be easy if that dumbass secondary menu really worked. None of the techs I’ve spoke to ever got into it. Everyone I know sends a print job and listens for the roller to rotate into position where you can pull it off.

Read Full Q/A … :

HP DeskJet 890C

My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.

Read Full Q/A … :

HP DeskJet 890C

Tray 1 (upper tray) paper feed problem
ANSWER : There is no way of adjusting the distance of lift. Could be that the pickup roller is worn enough that it will pick up a sheet that is higher, but not one that is lower down. You can look at the end of the roller that first makes contact and see if it is worn smooth.

Read Full Q/A … :

HP DeskJet 890C

HP 4250n 41.3 unexpected paper size
ANSWER : BULLSHIT

Read Full Q/A … :

HP DeskJet 890C

Paper tray 3
ANSWER : What usually happens in this instance is that the access flap to the left of the pickup roller pops up. This blocks the tray from opening. The only way to fix it is to look in from the back of the tray with a flashlight and get something thin and long, maybe a wooden ruler? Reach in and push down on the flap until it locks in place. If you’re not sure what I’m referring to, you can pull out and look at tray 2 for guidance.

Read Full Q/A … :

HP DeskJet 890C

HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr

Read Full Q/A … :

HP DeskJet 890C

Paper Feed Problem on HP R80
ANSWER : In the last examination it is our origination of death which chooses our responses to all the inquiries life puts to us. The most pleasant spot to be is in somebody’s idea; the most secure spot to be is in somebody’s petitions.

Read Full Q/A … :

HP DeskJet 890C