HP LaserJet 6P

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

An Er/04, Er/05, or Er/06 error message indicates a paper jam. Find and clear the printer of any jammed paper, or reset the printer if the printer has no jammed paper.
Requirements: Operating System – Windows 7, Windows 8, Windows 8.1, Windows 10. Browser – Google Chrome 10+, Internet Explorer (IE)10.0+, and Firefox 3.6.
The printer is either low in toner, the density is set too low, or the Economode may be turned on. Remove the toner cartridge and shake it. This will redistribute the toner and often will temporarily solve the problem. However, this usually indicates it is time to install a new cartridge.
Error Code 06 – Motor blocked

Explanation: The motor is stuck, something is obstructing the motor/wheel from spinning (bearing could be broken). Action: Please check motor and wheel to ensure there is no blockage. If no blockage, the motor may be overloaded, reduce load on the motor and try again.

Transaction Response 06 – Error

The customer`s card issuer has declined the transaction as there is a problem with the card number.

If your printer is compatible with Windows 10, download and run the Print and Scan Doctor to detect and fix isses. If problems persist, reinstall the latest HP printing software. Download and Install the latest HP printer software and driver.
The LaserJet 6P and 6MP were introduced October 1996. They included infrared technology, for wireless printing.
Most printers will stop working when they`re out of paper, ink or toner, or if the unit detects an issue with the ink or toner cartridge. When this occurs, you might receive an error message or notice blinking green or amber lights on your printer.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
If the display of the frequency inverter shows the error message Err. 06 appears, it is an overcurrent during operation at constant speed. Causes: The acceleration is too high.
Cable connection between the inverter and the grid is poor.
Sub-Zero Error Code EC 06

Meaning: Thermistor Inconsistencies – This means that the evaporator thermistor in the refrigerator read inconsistent temperatures on several occasions. It can also mean that the thermistor shorted for longer than ten seconds or read open.

If the drive is being controlled by serial communication, the drive will display –06 until the Hex value of 6 has been written to the command word. 5. If the 4-20 mA signal loss is programmed to freewheel stop and the drive has loss the signal. Check the 4-20 mA signal.
If you encounter an E06 message on your display, this is simply an indicator that your battery is nearly empty and needs to be charged. If your battery clearly still has enough charge left, but you`re still seeing the error message, it could be that your battery voltage shut-off setting is too high.
Error indicates it is Lower exhaust fan failure. 1. Check the fan on the lower left side of the product.
Error indicates it is Lower exhaust fan failure. 1. Check the fan on the lower left side of the product.
Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.
06 Error To continue turn off then on or a 55.02. 06 Error To continue turn off then on error is displayed on the control panel, it indicates that there is an issue with the NVRAM memory. Turn the printer off, and then back on to clear the error.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP PSC 1510 copying problems
ANSWER : my hp photocopy is not working

Read Full Q/A … :

HP LaserJet 6P

HP DeskJet 510 – problem
ANSWER : Recently started to look for a trusted and high-quality work with a broker for binary options, but the search was not a very successful, and my friend who is already a few years makes this kind of activity offered me options brokers review – site who himself uses optionsbrokersreview.com

Read Full Q/A … :

HP LaserJet 6P

epson printer problems
ANSWER : My Printer Has A Internal Erro

Read Full Q/A … :

HP LaserJet 6P

Paper Feed Problem on HP R80
ANSWER : In the last examination it is our origination of death which chooses our responses to all the inquiries life puts to us. The most pleasant spot to be is in somebody’s idea; the most secure spot to be is in somebody’s petitions.

Read Full Q/A … :

HP LaserJet 6P

Difference Between Laser Printer and InkJet Printer
ANSWER : Laser uses toner which is a powder that gets melted onto the page. Inkjet uses ink that gets squirted onto the page.

Read Full Q/A … :

HP LaserJet 6P

HP LaserJet 1160 pick-up problem
ANSWER : Take the black rubber roller out. Clean it and turn it 90-180 degrees so there is fresh rubber in the “corner”.

Read Full Q/A … :

HP LaserJet 6P

All panel lights blinking, printer doesnt respond
ANSWER : This is very easy process, you must change a new one

Read Full Q/A … :

HP LaserJet 6P

HP Laserjet printer page counter backward move
ANSWER : On all HP laserjet printers if you power them off the page count will decrease back to the nearest 10. For example, if the page reading is 123,799 and you power it off, the page count will go back to 123,790.

Read Full Q/A … :

HP LaserJet 6P