HP DeskJet 660C
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
You need to ensure your HP printer has enough paper, ink, or toner, and it is not stuck on paper jam. Also, check the status of your printer cartridge and try replacing it with a new one if it is not good enough. In some cases, your HP printer stops printing after you replace its parts.
Reasons why your HP printer has ink but won`t print
This may seem obvious, but it sometimes happens: first make sure your paper tray has paper in it. Misalignment, clogged printheads, faulty data communication or insufficient ink levels can also be sources of the problem.
Restart devices
If your printer connects to a Wi-Fi network, disconnect your computer or mobile device from the network name (SSID), and then reconnect it to the same network name your printer is connected to. If the printer is available and has a ready status, the issue is resolved.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
When you fill a cartridge, the ink sometimes doesn`t make it all the way to the bottom of the reservoir. Fix this problem by removing the cartridge and injecting more ink into the sponge through the exit hole. Air bubbles also can get trapped inside the cartridge, blocking ink flow.
To answer the actual question of why you can`t print it could be due to simple things such as networking issues, a paper jam, or low toner ink. Or it could be more complicated, such as service is required, there`s a physical breakage, or there`s a hardware driver problem.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
Make sure your Wi-Fi network and printer setup meet connection requirements. Restart the printer and the computer or mobile device to clear possible error conditions. Make sure the printer is not connected to a computer with a USB cable.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
HP LaserJet 2200D won't print configuration page
ANSWER : Find someone with a HP LaserJet 4100 and you can configure the card to the IP you want:
Read Full Q/A … :
HP DeskJet 660C
Hp printer not printing
ANSWER : Check estimated ink levelsFollow these steps to check the estimated ink levels.
Read Full Q/A … :
HP DeskJet 660C
HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr
Read Full Q/A … :
HP DeskJet 660C
I just bought an officejet 3830 2 weeks ago. Now it won't print at all! Says inkjet jam. It's not! I've done all the fixes as per hp's website now what?
ANSWER : Take it back and exchange it under warranty.
Read Full Q/A … :
HP DeskJet 660C
HP DeskJet 1220C Prints only Pink & Black
ANSWER : hi everyone. i have an hp ink advantage 5525 all-in-one. changed all cartridges as they were empty and when i tried to print i got blank pages. i gave a print order a couple times to find out what was going on and found out that yellow and magenta inks worked but not cyan and black. removed cartridges, clean and all many times and nothing happened. then i tried this youtu.be/f57jOGj-G5s and the print quality of magenta and yellow improved significantly but still no black or cyan at all. i can’t do the running water thing because the print head is not detachable. any suggestions?
Read Full Q/A … :
HP DeskJet 660C
hp deskjet 960c printing problem
ANSWER : RE: HP 960c printer. I have new cartridges and the test page prints out full color. When printing a color document the page prints in black & white. Why not color? The print page is on color not black & white.
Read Full Q/A … :
HP DeskJet 660C
HP Deskjet 640c wont print??
ANSWER : yes
Read Full Q/A … :
HP DeskJet 660C
HP Officejet Pro L7680-problems w/black print head
ANSWER : VLCM Print tech supporters are very helpful to support printing related issues. They are industry certified technicians. they have 12+ years of handful experience. visit page – vlcmprint.com
Read Full Q/A … :
HP DeskJet 660C