HP DeskJet 660C
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
The common reasons for this issue are various, for instance, the paper input tray is overloaded, dust or moisture can affect the paper feed or paper pick rollers, the printer driver is old, etc. Thus, the printer cannot detect the paper that has been inserted into the tray.
You need to ensure your HP printer has enough paper, ink, or toner, and it is not stuck on paper jam. Also, check the status of your printer cartridge and try replacing it with a new one if it is not good enough. In some cases, your HP printer stops printing after you replace its parts.
Make sure your paper meets the specifications for your product. If paper dust builds up on the rollers, they may lose traction and become unable to feed paper properly. Clean the paper guide. If roll paper does not feed, cut the end straight across and uncurl it by rolling it backward, if necessary.
A “Load Paper” intervention message appears on the printer display even when there is paper loaded in the tray. This error message means the printer is not detecting any paper on the tray. The same intervention message will appear when: The tray is empty.
If the paper is too thick or if it is media that your printer can`t accommodate, it may fail to feed correctly because of their dimensions or surface properties. Some inkjet printers use hardware or software adjustments to accommodate premium photo paper, which runs thicker than the typical sheets these devices accept.
If your printer is running low on ink, it may start printing blank pages. To check your ink levels, go to your printer`s control panel and select the Ink Levels option. Whenever the ink levels are low, replace the cartridges with new ones. You can also try shaking the cartridge gently to redistribute the ink.
Select > Paper Setting > paper source > Print Adjustments > Paper Feed Adjust.
With dot matrix printers, paper is often feed through pins on a wheel that grab and slowly move paper through the printer. With inkjet and other page printers, paper is fed through the printer with rollers that grab and move the paper through the printer.
This is often caused by the fact the pick-up roller is worn out. The layer of rubber around this plastic part overtime gets too smooth, preventing paper from feeding properly into the printer. This fix is not really hard, will take no more than half an hour and costs around 10,- (Euro or Dollar).
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.
Read Full Q/A … :
HP DeskJet 660C
hp 8600 pro when power on, paper jam message appear but there is no paper jam in the tray
ANSWER : Hp 8180 Photosmart All In One code keeps says paper jam and carriage jam when neither are jammed. I followed all the recommended things to do. I live in Raleigh NC any place to take this or any suggestion.
Read Full Q/A … :
HP DeskJet 660C
HP psc 1210 Wont Feed Paper
ANSWER : This printer seems to have special problems with paper feed asy. When functioning works
Read Full Q/A … :
HP DeskJet 660C
HP Laserjet 6MP wont feed paper
ANSWER : I had a similar paper pickup problem on laserjet 6mp. The printer would go through start-up sequence fine but when it received a print job you could here the main gears/rollers turning but no clicking from paper pickup solenoid, then eventually error lights would come one . I incorrectly assumed it was an error with the paper pickup mechanism and wasted a whole day taking the printer apart and replacing the paper pick mechanism. Long story short, if I had bothered to figure out the secondary error light codes from the start, I would have realized it was just a bad fuser and would not have wasted so much time.
Read Full Q/A … :
HP DeskJet 660C
HP 4250n 41.3 unexpected paper size
ANSWER : BULLSHIT
Read Full Q/A … :
HP DeskJet 660C
HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr
Read Full Q/A … :
HP DeskJet 660C
Error Message "Paper out" when paper loaded
ANSWER : Check your paper tray settings as printer may be looking for paper from the manual feed tray on top of printer.
Read Full Q/A … :
HP DeskJet 660C
Paper Feed Problem on HP R80
ANSWER : In the last examination it is our origination of death which chooses our responses to all the inquiries life puts to us. The most pleasant spot to be is in somebody’s idea; the most secure spot to be is in somebody’s petitions.
Read Full Q/A … :
HP DeskJet 660C