How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Partial prints are a common issue with printers and there are several main reasons it can occur: Problem with the print spooler (on Windows PCs) Overload of the GPU on later model Macs. Dodgy USB cord.
This issue may occur if the paper is loaded incorrectly in the paper tray or the paper size and tray settings are not programmed as needed.
Make sure that your page settings are set to print all pages and to print every page. Settings that cause some pages not to print are `manual duplexing`, `print every other page`, `print odd pages`, `print on both sides`, or similar settings.
The results of a mismatch between computer and printer can show up in flawed output, blank pages or printing failures. These same symptoms can occur if your driver software becomes damaged in a thunderstorm, power surge or outage, or by malware that worms its way onto your computer.
Here are the most common causes of a printer printing faded text or images: Low ink or toner levels. Toner sticking to the fuser roller or problems with the transfer roller. Low ink or toner density settings.
The most common cause of this problem is that the bottom margin, footer margin, or page border is outside the printable area of the page. All printers have an irreducible unprintable area necessitated by the mechanical requirements of paper handling.
They are a reference to the original drawing size. For example, if a drawing file is currently sized at 24″x36″, then a full size print of that file would be 24″x36″. A half size print, or 50% reduction, of the same 24″x36″ original would be 12″x18″.
Your printer can become misaligned if there is any paper stuck in the machine, print cartridges are clogged or dirty, improper installation of cartridges and using low quality cartridges. Additionally, a printer can become misaligned after the machine completes a large print job.
Adjust the paper size setting
In the application you want to print from, click File, and then click Print. Select your printer from the Printer drop-down list. Click Paper Size. Select the paper size that matches the size and type of paper loaded in the printer tray, and then click OK.
Choose “Printing Preferences” from the pop-up menu, then look at the setup options your print driver provides. Usually, there will be one called “Layout” or “Page Layout.” Once you`ve clicked “Layout,” you should have the option to manually set your margins to zero.
After printing, trim the page down to its intended size. For instance, to achieve a full bleed 11×17, run the job on 12×18 paper, add an extra half inch all around your design (11.5 x 17.5) and trim the edges with a paper cutter such as an MBM Triumph 4315 or 5255.
Determine how long the cartridge has been installed. White streaking through the printout or an entire missing color both indicate an empty cartridge. If the cartridge is depleted of one color, it needs to be replaced. Each color is necessary to create the colors used in day-to-day printing.
This looks like the paper is not aligned in the tray. Try to move the paper to the side it`s not printing and try again. Hope this will help.
It`s possible the document layout is exceeding the printable area of the page. Most desktop printers can`t print to the edge of the page. To find out what the limits are for the active printer, go to Page Setup and set all the margins to zero.
If your printouts are blurry or smeared, try these solutions: Make sure your paper is not damp, curled, old, or loaded incorrectly in your product. Use a support sheet with special paper, or load special paper one sheet at a time. Make sure your paper meets the specifications for your product.
Printing only what is highlighted and not the entire document.
So, what about people who use a combination of both print and cursive? These writing types, said Baggett, have a proclivity to be in a hurry and act flexibly given unusual circumstances. Too much printing, however, can indicate an intimacy barrier and an inability to express feelings.
Right-click the printer icon on the taskbar, and then select the Print Head Alignment. Or access the printer software, click the Maintenance tab, and then click the Print Head Alignment button. The printer prints test patterns that you use to check the print head alignment. Here are sample printouts.
It depends on the intensity of use, your print quality requirements, and variables like printer settings and the use of ink ribbons. According to the manufacturer specifications, a printhead might print up to 10 million labels.
Print head cleaning consumes some ink. To avoid wasting ink, clean the print head only if print quality declines; for example, if the printout is blurry or the color is incorrect or missing.
To resolve this issue, change the default paper size of your printer: Click Start, point to Settings, and the click Printers. Right-click the appropriate printer, and then click Properties. Click the Paper tab, and then click the paper size you want to use in the Paper Size box.
Technically, full bleed printing does not require a special kind of printer. You can use a standard desktop printer to make a full bleed print. That means that you can buy a full bleed printer anywhere!
What is bleed in printing? In basic definitions, full bleed printing is used when a project calls for a printed image or document to have no margins, or in other words, when the printed color & images extend all the way to the edge of the paper.