HP 6110 OfficeJet

Simply plug the USB cable from your printer into an available USB port on your PC, and turn the printer on. On the taskbar, select the Search icon, type Printers in the search bar, and then select Printers & scanners from the search results to open the Printers & scanners system setting.

Make sure your Wi-Fi network and printer setup meet connection requirements. Restart the printer and the computer or mobile device to clear possible error conditions. Make sure the printer is not connected to a computer with a USB cable.

Restart devices

If your printer connects to a Wi-Fi network, disconnect your computer or mobile device from the network name (SSID), and then reconnect it to the same network name your printer is connected to. If the printer is available and has a ready status, the issue is resolved.

Use the printer control panel to restore Wi-Fi setup mode, and then set up the printer again. Go to Restore Wi-Fi setup mode on your HP printer for more information. Enable Bluetooth for an HP Smart app setup: Enable Bluetooth on your computer or mobile device so that HP Smart can detect the printer during the setup.

In Windows, search for and open Add a printer or scanner . Click Add a printer or scanner, and then wait for Windows to locate available printers. If your printer is found, click it, and then click Add device to complete the driver installation.

Hold the ink cartridge by its sides with the contacts toward the printer, insert the ink cartridge into its slot, and then gently push the ink cartridge until it snaps into place. note: Install the color ink cartridge on the left and the black ink cartridge on the right. Repeat these steps for the other ink cartridge.

Although the printer can be used in a both wired and wireless network, only one of the connection methods can be used at a time. When the wireless setting is enabled, the wired (Ethernet) setting is disabled. When the wired (Ethernet) setting is enabled, the wireless setting is disabled.

Sometimes power cycling your printer can resolve the issue. Turn off your printer and unplug it, wait 30 seconds, plug your printer back in, and then turn the printer back on.

Why isn`t my printer connecting to my computer? The causes are various. It`s likely that your USB cable is damaged or your printer`s not detected by your computer. Maybe there`s something wrong with your printer driver.

Visit the Support section of the manufacturer`s website and search for the relevant model. Download the relevant drivers for your printer and computer`s operating system. Windows users must download Windows drivers and Mac users must download Mac drivers.

Advanced Wireless printers can connect to a laptop or device through Wi-Fi, Bluetooth, or USB port. For example, if you are using a laptop and want to print, then all you have to do is connect it to the wireless printer`s Wi-Fi, Bluetooth, or USB port without needing an internet connection.

Restart the printer and the computer or mobile device to clear possible error conditions. Restore Wi-Fi setup mode. Most printers with a touchscreen display or menu: Open the Wireless or Setup menu, select Network setup or Settings, and then select Restore Network Settings.

For printers, it usually means Wi-Fi, Bluetooth or both.

Restart the printer and the computer or mobile device to clear possible error conditions. Restore Wi-Fi setup mode. Most printers with a touchscreen display or menu: Open the Wireless or Setup menu, select Network setup or Settings, and then select Restore Network Settings.

Tap Wireless Setting. Choose your printer with Direct in its name. If prompted type the password “12345678”. Once connected, you should be able to print directly.

Your printer should have been packaged with a USB cable regardless of whether it is a wireless or wired printer. Plug the cable into your printer and your computer`s USB port. The direct linking should trigger your computer to recognize the printer and start up the software needed to complete the installation.

For printers, it usually means Wi-Fi, Bluetooth or both.

Restart the printer and the computer or mobile device to clear possible error conditions. Restore Wi-Fi setup mode. Most printers with a touchscreen display or menu: Open the Wireless or Setup menu, select Network setup or Settings, and then select Restore Network Settings.

For printers, it usually means Wi-Fi, Bluetooth or both.

Your printer should have been packaged with a USB cable regardless of whether it is a wireless or wired printer. Plug the cable into your printer and your computer`s USB port. The direct linking should trigger your computer to recognize the printer and start up the software needed to complete the installation.

For printers, it usually means Wi-Fi, Bluetooth or both.

Restart the printer and the computer or mobile device to clear possible error conditions. Restore Wi-Fi setup mode. Most printers with a touchscreen display or menu: Open the Wireless or Setup menu, select Network setup or Settings, and then select Restore Network Settings.