HP LaserJet 5SI
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Tray 2 lift error can be caused by a damaged, dislodged cartridge contact in the body of the printer, which would explain why multiple cartridges do not solve the problem. Open the cartridge door, remove the cartridge and inspect the contacts on the left side, they should look the same as the picture below.
This issue is caused when the pickup roller is dislodged or not installed correctly. The error message occurs due to the interference between the pickup roller and the lift plate in the paper input unit.
The flag located right of the pick-up roller has a fixed position. If the flag becomes stuck or broken, it will produce a 60.02 tray lift error or a “LOAD PAPER” message.
On the Windows taskbar, click the Windows icon ( ), and then click Devices and Printers. Right-click your product, and then select Printing Preferences. From the Printing Preferences menu, select Paper/Quality. From the Paper Source drop-down menu, select Tray 2.
Bend your hips and knees to squat down to your load, keep it close to your body, and straighten your legs to lift. Never lift a heavy object above shoulder level. Avoid turning or twisting your body while lifting or holding a heavy object.
A 13. B2. D2 paper jam error usually occurs when paper does not leave the paper tray.
HP Printer Color Laser Jet Pro MFP M477fnw 60-02 error. A 60.2 error is a tray lift error for tray 2. This can be caused by an issue with tray 2 lift mechanism, a broken tray 2 or something jammed that is preventing the tray from lifting properly.
An Er/02 error message indicates that the toner cartridge door is open or not closed completely. To resolve the error, open the toner cartridge door, and then close it completely.
An E2 error occurs when the printer attempts to print a single-page or multi-page print job, and the paper length selected in the print settings does not match the length of the loaded paper.
Improve printer performance by selecting the optimum paper type for the tray. You can select from the following paper types: Tray 1. [Thin Paper], [Thick Paper 1], [Thick Paper 2], [Plain Paper], [Recycled Paper], [Color Paper], [Preprinted], [Prepunched], [Letterhead], [Bond Paper], [Cardstock], [Label Paper]
An E2 error occurs when the printer attempts to print a single-page or multi-page print job, and the paper length selected in the print settings does not match the length of the loaded paper.
An E1 or E2 error indicates that the paper size setting does not match the paper size that is loaded. Remove all paper from the input tray, and then load the correct paper size. Remove any paper from the input tray. Slide the paper width guide as far as possible to the left.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
HP LJ 4350 – Tray 2 not lifting, no motors turn.
ANSWER : I can’t believe, pieces of paper was under the registration flap, now my 4250N is working.
Read Full Q/A … :
HP LaserJet 5SI
HP Laserjet 2200, Tray 2 Pickup Problem, Gears Clicking
ANSWER : Definitely not a solenoid problem. I’ve worked on tens of thousands of printers and never replaced a single solenoid. You probably knocked something loose when you installed the pickup roller. Maybe something to do with the gear on the end of the pickup roller shaft. You’ll need to take the gear assembly off to be able to see it.
Read Full Q/A … :
HP LaserJet 5SI
HP Laser Jet 4250 13.01.00 Jam in Tray 2
ANSWER : did you check if there’s multiple feeding while pulling papers
Read Full Q/A … :
HP LaserJet 5SI
Paper jam in tray 2 (but no paper pulled from tray) also M476DN models
ANSWER : Isopropyl alcohol is not recommended for rubber rollers. It dries out the rubber and hasten it’s cracking and breaking. It will do nothing to restore the grip. Those rollers are really hard to replace. It would be easy if that dumbass secondary menu really worked. None of the techs I’ve spoke to ever got into it. Everyone I know sends a print job and listens for the roller to rotate into position where you can pull it off.
Read Full Q/A … :
HP LaserJet 5SI
Laserjet M603DN tray 2 not lifting
ANSWER : I had a similar issue with a M602, though it’s the previous generation machine they are close in design. This one kept saying tray 2 lifting but there was not a sound of the motor even trying. My first thoughts were replace the lift motor then DC controller but it was replacing the formatter that fixed it after other parts made no difference.
Read Full Q/A … :
HP LaserJet 5SI
Tray 1 (upper tray) paper feed problem
ANSWER : There is no way of adjusting the distance of lift. Could be that the pickup roller is worn enough that it will pick up a sheet that is higher, but not one that is lower down. You can look at the end of the roller that first makes contact and see if it is worn smooth.
Read Full Q/A … :
HP LaserJet 5SI
HP 2200 – blinking attention light and tray 2
ANSWER : Nice day. (QUALITY IS OUR CULTURE)
Read Full Q/A … :
HP LaserJet 5SI
HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr
Read Full Q/A … :
HP LaserJet 5SI