HP CopyJet M

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Make sure that the paper is fully inserted into the product. Try printing again. If the issue is not resolved, try loading different brands of paper and different types of paper, one type at a time. Then, try printing again.
The common reasons for this issue are various, for instance, the paper input tray is overloaded, dust or moisture can affect the paper feed or paper pick rollers, the printer driver is old, etc. Thus, the printer cannot detect the paper that has been inserted into the tray.
In the Control Panel window, go to Hardware and Sound > Devices and Printers. Select any available printer and click on Print server properties. Open the Drivers tab in the Print Server Properties dialog. Under Installed printer drivers, select the printer driver to uninstall and click Remove.
Creases and folds in the paper are normally due to one of the following conditions: The paper is not correctly loaded in the paper tray. You are printing on a special type of paper or other media. The paper has absorbed too much moisture from the surrounding air.
Slide the paper all the way into the printer. The leading edge of the paper will stop at the Paper Drive Roller. Locate the Paper Sensor/OOPs sensor on the right side of the paper path. It can be seen from the top of the printer with the Top Cover open and has red, black, and blue wires attached to it.
Dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper jams and paper feed issues. Clean the rollers inside the printer, and then try to print again. Turn off the printer, and then disconnect the power cord.
Sometimes a paper jam error persists even though there is no jammed paper (false paper jam). Reset the printer, which might clear a false paper jam error, and then try to print again. With the printer turned on, disconnect the power cord from the printer. Unplug the power cord from the power source.
Sometimes a paper jam error persists even though there is no jammed paper (false paper jam). Reset the printer, which might clear a false paper jam error, and then try to print again. With the printer turned on, disconnect the power cord from the printer. Unplug the power cord from the power source.
Improperly Loading Paper into the Device

Loading paper that is stuck together, frayed, curled or bent can cause a jam. Overloading the paper tray, loading different thicknesses of paper in the tray or using paper that isn`t appropriate for your particular printer can all result in a jammed printer.

A piece of paper stuck in the paper tray or inside the printer can create a paper jam. Paper jams can occur for a variety of reasons, such as overloading the paper tray, loading different thicknesses of paper in the tray, or using paper that isn`t appropriate for your particular printer.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.

Read Full Q/A … :

HP CopyJet M

hp 8600 pro when power on, paper jam message appear but there is no paper jam in the tray
ANSWER : Hp 8180 Photosmart All In One code keeps says paper jam and carriage jam when neither are jammed. I followed all the recommended things to do. I live in Raleigh NC any place to take this or any suggestion.

Read Full Q/A … :

HP CopyJet M

hp c7280 clear paper jam
ANSWER : paper jam

Read Full Q/A … :

HP CopyJet M

HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr

Read Full Q/A … :

HP CopyJet M

HP 4250n 41.3 unexpected paper size
ANSWER : BULLSHIT

Read Full Q/A … :

HP CopyJet M

HP Officejet Pro 8500 Wireless with fake paper jam
ANSWER : HP Officejet is by far one of the frustrating piece of equipment I have ever owned. I bought it as unused in the package, at that point no warranty left. less than 6 months and 500 pages the white cog gear wheel broke. Luckily with instructions in this site I manage to glue it back together. Then I bought new ink – problems started as they were not original HP 30$ per cartridge. Ordered originals (here in China), took over one week to get them. Then found out that printhead needed to be replaced => more than 100$ spent. Still constant problems: If my wife kids print, I need to be stand-by as you never know what happens. Really an Office level equipment. After cleaning one paper jam I broke the encoder tape, took me another 4 hours to get it fixed. Then broke the cog gear again and got it displaced. Another 4 hours. Only reason I am not throwing this s***t out of window is that there are still ink left. Luckily this drinks them like a horse, for sure I will no more buy new ink. I will get a new laser instead, and not from HP. About cog wheel fixing: make sure that the white wheel is positioned correctly so that the small torx in shaft goes into the slit in the white wheel. When fitting the black cover back, make sure that the white washers on both sides fit into to slits of the black cover. Good luck.

Read Full Q/A … :

HP CopyJet M

HP 4250 13.06.00 Fuser output paper stop !
ANSWER : pick up solenoid

Read Full Q/A … :

HP CopyJet M

Paper Feed Problem on HP R80
ANSWER : In the last examination it is our origination of death which chooses our responses to all the inquiries life puts to us. The most pleasant spot to be is in somebody’s idea; the most secure spot to be is in somebody’s petitions.

Read Full Q/A … :

HP CopyJet M